but I was curious what my new Encore 45/70 pistol would do.
I used Trapdoor spec reloads with 405 grain bullets. I expected the worst, but really, its a B-I-G pistol, plus the somewhat mild (for a rifle its mild) loads meant i only got stung on the first shot, then i learned to keep the fingers of my support hand away from T/C's little underlever protrusion.
Only problem was the rear sight, i got cute and replaced the rear sight with a peep from a T/C Katadhin muzzleloader, and found out i hate that rear sight, although it looks good. It just doesn't have enough elevation adjustment to get it low enough
Groups are only at 25 yards, as this was a "getting aquainted" day --was aiming at the lower target -- first 5 shots that are 10 inches high look more like a pattern from Paul Bunyan's shotgun as i figured out the right way to hold this weird beast --- then i paused to lower the rear sight as much as i could and the last 2 shots went into one hole, 2.5" high and slightly to the left.
I'll try it again when i get some more low speed ammo loaded up and the stock pistol sight re-installed , but in summary, i was really pleased with how it shot so far as i was worried beforehand about the recoil


Now on to the Winchester -- 1942 vintage .32 Special loaded with off the shelf 170 grain soft points (Win Super X i think) -- i didn't have any brass so figured i'd buy a couple of boxes to shoot and give a jumpstart on the brass supply
I took the pic with the rifle on the rest, but i shot this one offhand, I figured the most likely hunting shots i take with this would be offhand, so i wanted to see how it shot --- i will try it from the bench some other time.
I was pretty happy to see that the former owner seemingly already sighted it in for me



the rest of the rather short afternoon/early evening was spent knocking golfballs and shotgun hulls around the range with the Henry .22. No photos taken of this action though
