Got brass rod?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
jnyork
Advanced Levergunner
Posts: 4454
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Got brass rod?

Post by jnyork »

For a gun project, I need a piece of brass rod, 3/16 or 1/8, about 4" long. I have been to Lowe's and HD, when I ask all I get is a blank stare. Anyone have any ideas where I could look? Thanks
Top
shooter
Senior Levergunner
Posts: 1555
Joined: Thu Dec 20, 2007 10:42 pm
Location: Heartland, TX

Re: Got brass rod?

Post by shooter »

I just bought a brass rod at Ace Hardware in New Mexico at Christmas. Only place in town that I could find any.
‎"If ye love wealth greater than liberty, the tranquility of servitude greater than the animating contest for freedom, go home from us in peace. We seek not your counsel, nor your arms. Crouch down and lick the hand that feeds you; and may posterity forget that ye were our countrymen" - Samuel Adams
Top
User avatar
crs
Advanced Levergunner
Posts: 3154
Joined: Thu Sep 06, 2007 10:32 am
Location: Republic of Texas
Contact:
Contact crs

Re: Got brass rod?

Post by crs »

What shooter said - go to a hardware store and they should have it.
CRS, NRA Benefactor Member, TSRA, DRSS, DWWC, Whittington Center
Android Ballistics App at http://www.xplat.net/
Top
User avatar
Old No7
Advanced Levergunner
Posts: 3739
Joined: Tue Dec 18, 2007 9:06 pm
Location: Southern Maine

Re: Got brass rod?

Post by Old No7 »

You might want to check out Buffalo Arms, Track Of The Wolf or Dixie Gun Works or search on any other muzzleloading supplies websites. It's common for some guys to use solid brass range rods for their "old timer" rifles.

If weight is an issue, my twin once made a servicable but light-weight range rod using several different diameter brass tubes, inside of one another. I think he used wraps of black electrical tape to keep the spacing between the tubes correct. This way, he had the look and benefit of brass -- but without all the weight. I think he also had a wooden dowel as the center core for some added strength too.

Hope this helps!

Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Top
User avatar
Old Ironsights
Posting leader...
Posts: 15083
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:
Contact Old Ironsights

Re: Got brass rod?

Post by Old Ironsights »

jnyork wrote:For a gun project, I need a piece of brass rod, 3/16 or 1/8, about 4" long. I have been to Lowe's and HD, when I ask all I get is a blank stare. Anyone have any ideas where I could look? Thanks
You need it here or there?

I have some Octagonal brass rod, bigger than that OD (IIRC), that I could lop off a hunk of...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Top
jnyork
Advanced Levergunner
Posts: 4454
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: Got brass rod?

Post by jnyork »

Thanks, OIS, I need round stock.
Top
User avatar
Rimfire McNutjob
Advanced Levergunner
Posts: 3342
Joined: Mon Sep 03, 2007 2:51 pm
Location: Sanford, FL.

Re: Got brass rod?

Post by Rimfire McNutjob »

Ace Hardware ... as previously mentioned. I bought a piece recently to remove a 5mm RRM case stuck in the chamber of a Remington 592 rifle.
... I love poetry, long walks on the beach, and poking dead things with a stick.
Top
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Got brass rod?

Post by Noah Zark »

GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Might as well face it, you're addicted to guns . . .
Top
User avatar
Hawkeye2
Levergunner 3.0
Posts: 716
Joined: Mon Nov 30, 2009 8:46 pm
Location: Winchester, VA

Re: Got brass rod?

Post by Hawkeye2 »

Check your local welding supply store for brazing rod. You might be supprised how large you can get there, usually 30" or 3', can't rmember which.
Top
jnyork
Advanced Levergunner
Posts: 4454
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: Got brass rod?

Post by jnyork »

Thanks, everyone, a generous member here is sending me just what I need. :D
Top
jnyork
Advanced Levergunner
Posts: 4454
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: Got brass rod?

Post by jnyork »

Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Is that the words to a song or are you off your meds again? :lol:
Top
KCSO
Levergunner 3.0
Posts: 780
Joined: Wed May 14, 2008 3:57 pm
Location: North East Nebraska

Re: Got brass rod?

Post by KCSO »

I keep a lot of rod stock on hand in the shop PM me your address and I will send you a chunk.
Top
User avatar
vancelw
Advanced Levergunner
Posts: 3983
Joined: Mon Sep 28, 2009 1:56 pm
Location: 90% NE Texas and 10% SE Montana

Re: Got brass rod?

Post by vancelw »

Farm supply stores like Tractor Supply, Atwood's, Orscheln, Murdoch's might have it.
You might even try Michael's or Hobby Lobby. I don't know if such a thing exists as a local hobby shop (remote cars or airplanes.) They used to have metal and wood stock in supply.
"Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world." - Thomas Carlyle
Top
piller
Posting leader...
Posts: 15294
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Got brass rod?

Post by piller »

+1 on Ace Hardware having it. In the welding supply section of my local ACE they have brazing rod of almost any thickness you want. It is all 3 ft long.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Top
TDF
Levergunner
Posts: 32
Joined: Tue Jan 29, 2008 7:42 pm
Location: Emerald, NE

Re: Got brass rod?

Post by TDF »

jnyork wrote:
Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Is that the words to a song or are you off your meds again? :lol:
The "Pretenders".

One of their hits.

TDF
Top
jnyork
Advanced Levergunner
Posts: 4454
Joined: Wed Sep 12, 2007 12:33 pm
Location: Wyoming and Arizona

Re: Got brass rod?

Post by jnyork »

TDF wrote:
jnyork wrote:
Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Is that the words to a song or are you off your meds again? :lol:
The "Pretenders".

One of their hits.

TDF

Never heard of 'em. Must be before my time. :?
Top
User avatar
horsesoldier03
Advanced Levergunner
Posts: 2154
Joined: Sat Sep 08, 2007 7:32 pm
Location: Kansas

Re: Got brass rod?

Post by horsesoldier03 »

They have brass rods at True Value and Orschlens Farm and Home here.
Gun Control is not about guns, it is about control!
Top
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Got brass rod?

Post by Noah Zark »

jnyork wrote:
Never heard of 'em. Must be before my time. :?

The Pretenders, late 70s, into the 80s. Chrissie Hynde is the lead vocalist.

I know you've heard the song:

http://www.youtube.com/watch?feature=pl ... eTIhqGfVCk

Noah
Might as well face it, you're addicted to guns . . .
Top
Gobblerforge
Senior Levergunner
Posts: 1527
Joined: Tue Sep 04, 2007 1:02 pm
Location: Eastern Ohio, Foothills of Appalachia
Contact:
Contact Gobblerforge

Re: Got brass rod?

Post by Gobblerforge »

The unthreaded part of a bolt makes a good rod.
Gobbler
Click Click Boom
Top
klhill
Levergunner 2.0
Posts: 117
Joined: Sat Jan 12, 2008 11:26 am
Location: Prescott,AZ

Re: Got brass rod?

Post by klhill »

www.speedymetals.com Brass rods in lots of sizes plus about any other type of metal you could imagine.
Top
awp101
Advanced Levergunner
Posts: 5672
Joined: Mon Apr 09, 2007 7:13 pm
Location: DeeDee Snavely's Used Guns and Weapons

Re: Got brass rod?

Post by awp101 »

Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Great, now I'm going to spend the rest of the day getting that song out of my head... :lol:
If these walls could talk, I'd listen to the floor.
Top
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: Got brass rod?

Post by Noah Zark »

awp101 wrote:
Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Great, now I'm going to spend the rest of the day getting that song out of my head... :lol:

YOU'RE SPECIAL . . .
SO SPECIAL . . .


Noah :wink: :lol:
Might as well face it, you're addicted to guns . . .
Top
awp101
Advanced Levergunner
Posts: 5672
Joined: Mon Apr 09, 2007 7:13 pm
Location: DeeDee Snavely's Used Guns and Weapons

Re: Got brass rod?

Post by awp101 »

Noah Zark wrote:
awp101 wrote:
Noah Zark wrote:GOT BRASS . . .
IN POCKET
GOT BOTTLE I'M GONNA USE IT
INTENTION I FEEL INVENTIVE
GONNA MAKE YOU, MAKE YOU, MAKE YOU NOTICE . . .

Noah ;)
Great, now I'm going to spend the rest of the day getting that song out of my head... :lol:

YOU'RE SPECIAL . . .
SO SPECIAL . . .


Noah :wink: :lol:
Yeah, Mama always said I was "special". :lol:

She also called me Sun 'cause I was so bright... :idea:
If these walls could talk, I'd listen to the floor.
Top
User avatar
COSteve
Advanced Levergunner
Posts: 4088
Joined: Sun Jul 12, 2009 4:03 pm
Location: A little valley up in the Rockies

Re: Got brass rod?

Post by COSteve »

Go to a hobby shop that works with RC airplanes and the like. You can get a piece of 3/16" brass rod for a buck or two. I got one to raise the sight on my Henry H001 to use with a peep sight before I switched to a receiver mounted one.

Image
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
Top
Post Reply

Return to “General Discussion”