Need a little help with cast lead bullets.

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
kentdep
Levergunner 1.0
Posts: 68
Joined: Sat Dec 22, 2007 8:55 am
Location: Michigan

Need a little help with cast lead bullets.

Post by kentdep »

I picked up a Marlin .25-20 last week and I am hunting down all the bullets I can. So far I have found some Hornady 60 grain and some Reminton 85 grain jacketed bullets. That is a good start in the jacketed bullet department but I want some lead bullets too.

I have found that Meister selles some cast bullets but I haven't been able to nail down other sources. Any other suggestions?

Jay
User avatar
AndyM
Levergunner 3.0
Posts: 507
Joined: Fri Dec 21, 2007 7:40 am
Location: PA

Post by AndyM »

I think Montana Precision also sells them.
Speer also makes a 75 grain flat point
User avatar
TedH
Advanced Levergunner
Posts: 8355
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Post by TedH »

Buffalo Arms has some too.
Charles
Advanced Levergunner
Posts: 2004
Joined: Sat Dec 15, 2007 2:29 pm
Location: Deep South Texas

Post by Charles »

You can find what you want at Bullshop which is a custom casting outfit in Alaska. They do fine work. You can Google up web site for them.
Dakota7
Levergunner
Posts: 42
Joined: Wed Sep 12, 2007 12:54 pm
Location: North Dakota

Post by Dakota7 »

Montana Bullet Works. Good people to deal with. One of the sponsors of this site if I remember correctly.

http://www.montanabulletworks.com/wst_page6.html
Dakota7
kentdep
Levergunner 1.0
Posts: 68
Joined: Sat Dec 22, 2007 8:55 am
Location: Michigan

Post by kentdep »

Thank you guys so much! That is a big help.

Jay
Post Reply