Help from a 25-20 Marlin 1894CL owner?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
jchiggins
Levergunner
Posts: 12
Joined: Fri Aug 20, 2010 1:54 am

Help from a 25-20 Marlin 1894CL owner?

Post by jchiggins »

Hi If someone owns one of the newer Marlin 1894CL 25-20 rifles, Could you please put a caliper on the mag tube and tell me the outside diameter of the magazine?
Thanks in Advance.
I want to see if someone makes replacement mag tubes in the proper diameter to adapt the gun to a fill length magazine. jp
Top
Wind
Levergunner 2.0
Posts: 474
Joined: Fri Dec 26, 2008 1:10 pm
Location: North Central Washington, USA

Re: Help from a 25-20 Marlin 1894CL owner?

Post by Wind »

Hey there JC -- Pretty close to .570". Hope this helps, Best regards. Wind
Top
KCSO
Levergunner 3.0
Posts: 780
Joined: Wed May 14, 2008 3:57 pm
Location: North East Nebraska

Re: Help from a 25-20 Marlin 1894CL owner?

Post by KCSO »

If you can fill the opening a mag tube from a 32 H and R will work just fine.
Top
Post Reply

Return to “General Discussion”