Scout mount on my Marlin
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Scout mount on my Marlin
First time on this site so Hello Everyone.
I have a Marlin 308MXLR that I'm thinking about adding a Simmons 2-6x32 scope on a
XS sytems scout mount. Yes, I have looked at Leupold & Nikon but not really looking
to break the bank on this. Any advice or experience on this?
I have a Marlin 308MXLR that I'm thinking about adding a Simmons 2-6x32 scope on a
XS sytems scout mount. Yes, I have looked at Leupold & Nikon but not really looking
to break the bank on this. Any advice or experience on this?
Re: Scout mount on my Marlin
Welcome to the board. I and some people I know have all had good luck with the XS mount on Marlin 336's. It is a solid mount and not difficult to install.
- AJMD429
- Posting leader...
- Posts: 32800
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Scout mount on my Marlin
I have a "scout" system, but used a holosight, as it was for varmint/night/farm use which typically can vary from coyote at 75 yards to possum at 10 yards. Some others will chime in with 'scope' experience.
Here's what I wound up with, although I'm looking to try the Burris Fastfire...
It may LOOK FUNNY , but it is a truly PRACTICAL 'go-to' gun for things that "go 'bump' in the night" on an ordinary midwestern farm...
Here's my original 'post' on it - http://www.levergunscommunity.com/viewt ... =1&t=23531
Remember - it is NO SIN to combine the best of 'old' (levergun) with the best of 'new' (laser, holograph, smokeless powder, etc...) - the point is "is it PRACTICAL...?".
Here's what I wound up with, although I'm looking to try the Burris Fastfire...
It may LOOK FUNNY , but it is a truly PRACTICAL 'go-to' gun for things that "go 'bump' in the night" on an ordinary midwestern farm...
Here's my original 'post' on it - http://www.levergunscommunity.com/viewt ... =1&t=23531
Remember - it is NO SIN to combine the best of 'old' (levergun) with the best of 'new' (laser, holograph, smokeless powder, etc...) - the point is "is it PRACTICAL...?".
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Scout mount on my Marlin
Like AJMD, I mounted a holo site in the scout position. As for the flashlight mount, though it's not shown here, I picked up one from Wild West Guns.
Truthfully, I haven't had any real utility out of the flashlight mount, but for a while we had a mountain lion prowling the canyon behind my place. Seemed like a real good idea at the time.
Truthfully, I haven't had any real utility out of the flashlight mount, but for a while we had a mountain lion prowling the canyon behind my place. Seemed like a real good idea at the time.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: Scout mount on my Marlin
I've got the XS on an 1894 and really like it. If I can install it without goofing anything up, anyone can!
After seeing these holosights, I may try my ATN UltraSight on it for giggles.
And BTW, welcome!
After seeing these holosights, I may try my ATN UltraSight on it for giggles.
And BTW, welcome!
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
- 2ndovc
- Advanced Levergunner
- Posts: 9453
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Scout mount on my Marlin
I have the XS on my 450 Marlin and Kid#2's 336, .35 Marlin. I have a Leupold on my rifle but put a Simmons pistol scope
on the Kid's. The eye relief isn't perfect with the pistol scope but it works well.
One of these days I'll get a picture of them together.
jb
on the Kid's. The eye relief isn't perfect with the pistol scope but it works well.
One of these days I'll get a picture of them together.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- Paladin
- Senior Levergunner
- Posts: 1932
- Joined: Mon Jan 21, 2008 9:55 am
- Location: Not Working (much)
Re: Scout mount on my Marlin
I have the XS on a few rifles. Here with a Zeiss red dot and one with a Leopold 1.5x5 IR on my Guide Gun. I have never had a problem with them. Please excuse the 1894s condition it gets used a lot and was my truck and ATV gun for the last few years.
Welcome to a great site.
Welcome to a great site.
You do not have the required permissions to view the files attached to this post.
Last edited by Paladin on Thu Jul 29, 2010 7:45 pm, edited 1 time in total.
It is not the critic who counts
-
- Levergunner 1.0
- Posts: 52
- Joined: Wed Oct 08, 2008 8:29 am
Re: Scout mount on my Marlin
Picture of my 336 with XS sights and scout mount. Using a Tasco Pro Point
Charlie
Charlie
I'm getting old. In my old age I find I long for the guns of my youth.
Revolvers and 1911's were the handguns of my youth.
I know them and I trust them.
Revolvers and 1911's were the handguns of my youth.
I know them and I trust them.
Re: Scout mount on my Marlin
I have two - sorry no pics - on a .45-70 and a .444. One thing I urge you to do is test try the scope. While eye relief is long like many 'handgun' scopes, it is still critical. I have several handgun scopes that cannot be hold at arms length, but about half way. That can be done in the field with a handgun, but not on a long gun. You can either see through it or you can't.
Try it first. FWIW I have stuck with 2X Leupolds on mine. I tested and found the higher magnification just made it harder to see through them because the alignment becomes more critical. Not always possible in the field, you know?
Try it first. FWIW I have stuck with 2X Leupolds on mine. I tested and found the higher magnification just made it harder to see through them because the alignment becomes more critical. Not always possible in the field, you know?
Re: Scout mount on my Marlin
I have a TRUGLO red dot on my 10/22 because the Simmons .22 scope gave up after about 2500 rounds. I feel the TRUGLO is too bulky for my lever even though it's deadly accurate. I now lack trust in the other Simmons on my .444, which is a Simmons 4 x32 Shotgun scope. I bought the shotgun scope specifically because it's EER, and its ok so far. I'm using Weaver low rings, and I need medium rings. I want the same scope on my 10/22 as I have on my .444 so I'll have the same sight picture. I'm still trying to decide if I can accept the look of a Burris Fastfire on my levergun. If I can't adjust to the Fastfire's look, I'll probably go with a Bushnell Trophy XLT 2 x 6 handgun scope for both rifles since it allows 9-26" of eye relief.
rimrock
rimrock
Re: Scout mount on my Marlin
I have a 2x Bushnell pistol scope on mine and it works great. I seem to recall trying a 2x6 pistol scope and it not working out eye relief wise. (you couldn't use it on the higher powers IIRC)
Slow is just slow.
Re: Scout mount on my Marlin
Well, after a lot of thought and research I'm down to either a Weaver 2x28
($150 @ SWFA) or Nikon 2x20 ($200 same place). Wanting silver to match
the gun and these are the 2 best options for what I want to spend. Have a
Leupold VX-I on my 270 b/a and love it but don't want to drop the cash on
an FX-II right now.
Thanks so much to all of you for your input and advice. I'll post pics when
I get it all put together and it works. If it doesn't I'll be in my room pouting.
Thanks again
T
($150 @ SWFA) or Nikon 2x20 ($200 same place). Wanting silver to match
the gun and these are the 2 best options for what I want to spend. Have a
Leupold VX-I on my 270 b/a and love it but don't want to drop the cash on
an FX-II right now.
Thanks so much to all of you for your input and advice. I'll post pics when
I get it all put together and it works. If it doesn't I'll be in my room pouting.
Thanks again
T
Re: Scout mount on my Marlin
Hello everybody,
Well I made my choice. Went with Nikon 2x20. If it all works
out I'll post some pics. If it doesn't I'll be in my room pouting.
Thanks to all for your input, advice, and pics.
T
Well I made my choice. Went with Nikon 2x20. If it all works
out I'll post some pics. If it doesn't I'll be in my room pouting.
Thanks to all for your input, advice, and pics.
T
Re: Scout mount on my Marlin
I think you will be very happy with your choice.
Re: Scout mount on my Marlin
Help
Got everything put together folllowing what instructions I got, but back of scope won't seat
in to the ring. If I move the scope back so it seats I lose the eye relief. Using medium ht.
rings per XZ recommendations. I guess I go to high rings???
T
Got everything put together folllowing what instructions I got, but back of scope won't seat
in to the ring. If I move the scope back so it seats I lose the eye relief. Using medium ht.
rings per XZ recommendations. I guess I go to high rings???
T
Re: Scout mount on my Marlin
It is hard to say from your description. A pic of the set up might help. I am not sure raising the scope would help. It seems like there would be a combination of slots on the mount that would make it work out unless through bad luck the scope's length and the location of the adjustments prevent you from mounting it in the sweet spot.
Re: Scout mount on my Marlin
Dave,
What I'm getting at is that the eyepiece of the scope is down tight to
the mount but up off the ring base when the scope is set forward to
get proper eye relief. That is with the eyepiece just about where the
barrel meets the receiver. I'm worried if high rings are high enough or
if extra high would be better. Sorry if my post last nite was confusing
but note the time of nite and forgive the fact I'd had a couple pulls of
the cork.
T
What I'm getting at is that the eyepiece of the scope is down tight to
the mount but up off the ring base when the scope is set forward to
get proper eye relief. That is with the eyepiece just about where the
barrel meets the receiver. I'm worried if high rings are high enough or
if extra high would be better. Sorry if my post last nite was confusing
but note the time of nite and forgive the fact I'd had a couple pulls of
the cork.
T
-
- Levergunner 1.0
- Posts: 51
- Joined: Sat Jan 30, 2010 10:11 am
Re: Scout mount on my Marlin
I like evil black rifles
I call it my Appalachian assault rifle
Kid
Live with honor, ride with truth. Be friendly to others. But always carry a gun on your side and a knife in your boot because there are those that do not feel the same as this.
My knife and leather website
www.kidcouteau.com
My knife and leather website
www.kidcouteau.com
Re: Scout mount on my Marlin
That doesn't sound that bad. It sounds like high would work but it is hard to say without seeing how much space you've got. The Brownells catalog lists the height from the top of the base to the inside bottom of the rings. Maybe taking a look at that would give you a good idea of what would work. I have Warne Maximas on my gun.TBROWN wrote:Dave,
What I'm getting at is that the eyepiece of the scope is down tight to
the mount but up off the ring base when the scope is set forward to
get proper eye relief. That is with the eyepiece just about where the
barrel meets the receiver. I'm worried if high rings are high enough or
if extra high would be better. Sorry if my post last nite was confusing
but note the time of nite and forgive the fact I'd had a couple pulls of
the cork.
T
http://www.brownells.com/