New Lever-not a repeater.
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
New Lever-not a repeater.
Here's my latest addition to the Marlin Ballard collection. This one is a special order #3, with extra heavy 28" full octagon barrel, ordered without rear sight dovetail, and with gallery midrange vernier, and Win. globe front. It also has special order wood, with checkering, shadowline cheepiece, and horn tip.
Because of the extra heavy barrel, it doesn't hve the typical concave receiver top used on std. #3 Ballards either.
Another Ballard is headed my way next week. I'll post pics when it arrives.-Vall
Because of the extra heavy barrel, it doesn't hve the typical concave receiver top used on std. #3 Ballards either.
Another Ballard is headed my way next week. I'll post pics when it arrives.-Vall
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Ohhhh man! There's a sillywet shooter
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
- Rimfire McNutjob
- Advanced Levergunner
- Posts: 3158
- Joined: Mon Sep 03, 2007 2:51 pm
- Location: Sanford, FL.
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Thanks fellas!
A 6 1/2 Rigby in .22 huh? That sounds like a great piece! Didn't come out of the Denver area did it? I missed one that was for sale down there a couple years ago, and it also was in .22LR.
The next one on the way is a schuetzen based on a #6 Ballard. Should arrive this week sometime!
kimwcook,
Ballards can confuse a lot of folks! Don't feel lonely!
Marlin made about 14 std. model variations on the Ballard, plus numerous custom versions made to the customer's request. This is the reason the Bluebook of Gun Values has never covered Ballards. It's just too confusing to try and catgorize some of them, plus so many were customized and wont fall into a factory designated model.
The "#6" based Ballard I have coming is a good example. I believe it may be a Zettler Bros. custom from the late 1800's New York area. It wont fit any Marlin category.-Vall
A 6 1/2 Rigby in .22 huh? That sounds like a great piece! Didn't come out of the Denver area did it? I missed one that was for sale down there a couple years ago, and it also was in .22LR.
The next one on the way is a schuetzen based on a #6 Ballard. Should arrive this week sometime!
kimwcook,
Ballards can confuse a lot of folks! Don't feel lonely!
Marlin made about 14 std. model variations on the Ballard, plus numerous custom versions made to the customer's request. This is the reason the Bluebook of Gun Values has never covered Ballards. It's just too confusing to try and catgorize some of them, plus so many were customized and wont fall into a factory designated model.
The "#6" based Ballard I have coming is a good example. I believe it may be a Zettler Bros. custom from the late 1800's New York area. It wont fit any Marlin category.-Vall
-
- Levergunner 1.0
- Posts: 75
- Joined: Sun Sep 02, 2007 12:04 pm
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
David,DavidS wrote:To Marlinman,
I have owned my Ballard for about 6 years. It has a heavy round barrel by A.W.Peterson. Something nags me that he may have lived or worked in Colorado. Not sure though.
You are correct! Axel Peterson worked in Denver, Co. from the late 1800's to around 1950. He worked with the famous Geo. C. Schoyen in his shop, and just before his death in 1910, Schoyen sold the business to AW Peterson. Peterson continued the shop (along with his son) for years, and even after Peterson's death his son continued on for awhile.
AW Peterson was a top schuetzen shooter, and probably made some of the finest .22 rimfire barrels ever! There is a lot of info on Peterson available in several reference books I own. If you're interested I can give you titles so ou can read up on this great American gunsmith.-Vall
- Ysabel Kid
- Moderator
- Posts: 27910
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
To Marlinman,
That is what I wanted to say,but I could not remember exactly how Peterson came to work with G.Schoyen. The fellow I have been buying my single shots from told me about the Schoyen connection and I remembered just enough,but not all. If you could send me the book titles on Peterson and Schoyen,I would like that. It sounds like good reading.
That is what I wanted to say,but I could not remember exactly how Peterson came to work with G.Schoyen. The fellow I have been buying my single shots from told me about the Schoyen connection and I remembered just enough,but not all. If you could send me the book titles on Peterson and Schoyen,I would like that. It sounds like good reading.
David S
- marlinman93
- Advanced Levergunner
- Posts: 6494
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon