40 Caliber Volcanic Rifle,
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: 40 Caliber Volcanic Rifle,
And a Pistol to go with it.
Re: 40 Caliber Volcanic Rifle,
Wow Charlie. Amazing work there once again.
Is the frame brass/bronze or is it aluminum some how finished to look likek brass?
Is the frame brass/bronze or is it aluminum some how finished to look likek brass?
Re: 40 Caliber Volcanic Rifle,
Navy Brass.
Re: 40 Caliber Volcanic Rifle,
have you had a chance to go out and see how it shoots?
when your enemy is within range so are you
Re: 40 Caliber Volcanic Rifle,
This Girl will shoot.
The range is 33 yards. I am sitting on the ground, leaning back against a tree, I'm holding the gun with both hands between my knee's. four shots in a tad over 5/8" with the fifth a flyer. A second group also had a flyer on the fifth shot! I know this old boy who said that it might be the barrel warming up and causing the flyer. Or it could be, I just need more practist.
The range is 33 yards. I am sitting on the ground, leaning back against a tree, I'm holding the gun with both hands between my knee's. four shots in a tad over 5/8" with the fifth a flyer. A second group also had a flyer on the fifth shot! I know this old boy who said that it might be the barrel warming up and causing the flyer. Or it could be, I just need more practist.
Re: 40 Caliber Volcanic Rifle,
So what's the magazine capacity. Is it possible that the mag spring is unloaded after the 5th is loaded and that is causing this?
Nice group. Better than I can do with any pistol at that range!
Nice group. Better than I can do with any pistol at that range!
Re: 40 Caliber Volcanic Rifle,
The magazine will hold 8.Alan Wood wrote:So what's the magazine capacity. Is it possible that the mag spring is unloaded after the 5th is loaded and that is causing this?
Nice group. Better than I can do with any pistol at that range!
I only loaded 5 for the group shooting. I don't think it's the spring, although it could be.
I will keep watching this and see if it continues to happening, then I will know if it's the gun or me.
It's still a bit early in the life of this gun to come to any conclusions.
Re: 40 Caliber Volcanic Rifle,
Fantastic!
I'd really love to see a video of these guys if you can pull that off. Even shot with a cell phone and uploaded to YouTube would be fine, I'd just really like to see 'em in action!
Best,
Oly
I'd really love to see a video of these guys if you can pull that off. Even shot with a cell phone and uploaded to YouTube would be fine, I'd just really like to see 'em in action!
Best,
Oly
Cheers,
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
Re: 40 Caliber Volcanic Rifle,
Did you watch those videos back on page 8 ?olyinaz wrote:Fantastic!
I'd really love to see a video of these guys if you can pull that off. Even shot with a cell phone and uploaded to YouTube would be fine, I'd just really like to see 'em in action!
Best,
Oly
Re: 40 Caliber Volcanic Rifle,
Yes! I was hoping to see the big'un in action.
Best,
Oly
Best,
Oly
Cheers,
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: 40 Caliber Volcanic Rifle,
Wow!Charlie wrote:
Man you have the colection there! Very well done indeed Charlie!
Re: 40 Caliber Volcanic Rifle,
Charlie,
You have fans all around the world. I've had bunches view your epic on building the rifle from France, Germany, and just a couple of days ago, the Netherlands. Some mention following you guys on Practical Machinist, too.
You have fans all around the world. I've had bunches view your epic on building the rifle from France, Germany, and just a couple of days ago, the Netherlands. Some mention following you guys on Practical Machinist, too.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Re: 40 Caliber Volcanic Rifle,
Due to reasons beyond my control I have not visited for a while, so I come back and encounter a completely unexpected treat. The superlatives have been consistant but far from overused. What can I add?
I am jealous, but in an appreciative way. I may be past my time to develop the skill to start and complete such a project but I am going to inverstigate and give it a try...encouaging my two beautiful young boys to join me to take up such a wonderful and rewarding endeavour.
I don't know if this expression is used in the US, but here in Oz when we see something surprising and extraordinary and are shocked into silence for a short period we say we are Gobsmacked. That's pretty much what I have been for 11 pages Charlie, Gobsmacked.
Thanks for that mate.
I am jealous, but in an appreciative way. I may be past my time to develop the skill to start and complete such a project but I am going to inverstigate and give it a try...encouaging my two beautiful young boys to join me to take up such a wonderful and rewarding endeavour.
I don't know if this expression is used in the US, but here in Oz when we see something surprising and extraordinary and are shocked into silence for a short period we say we are Gobsmacked. That's pretty much what I have been for 11 pages Charlie, Gobsmacked.
Thanks for that mate.
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the outcome of the vote.
-Benjamin Franklin
-Benjamin Franklin
Re: 40 Caliber Volcanic Rifle,
Crow,
You said,
"Give it a try",
that my Friend - - - - ,
Makes my day.
You said,
"Give it a try",
that my Friend - - - - ,
Makes my day.
Re: 40 Caliber Volcanic Rifle,
Fabulous work! Great thread. I found the pistol thread the other day, and then this one today. Happy Happy.
One thing that did depress me a little is that I want to learn to drill and rifle barrels as expediently as possible. That was how I found the pistol thread. Now that the US is controlling it's firearm exports more carefully there are a bunch of barrels that at very hard to get so I can't just call up a seller and buy what I want in all cases. Of course it would still be easier to buy what I need than to build, but the difference is that I have a real reason to move ahead with the barrel making given how hard it can be to get barrels.
So... I was not happy to hear you have not been able to do the longer barrels... I have just been doing the research at this stage, Bill's barrel making video, the pope book. Ideally finding a slow method of drilling that did not require high pressure oil would suit me, if possible. Anyway, inspiring stuff, thanks for the incredible online journey.
One thing that did depress me a little is that I want to learn to drill and rifle barrels as expediently as possible. That was how I found the pistol thread. Now that the US is controlling it's firearm exports more carefully there are a bunch of barrels that at very hard to get so I can't just call up a seller and buy what I want in all cases. Of course it would still be easier to buy what I need than to build, but the difference is that I have a real reason to move ahead with the barrel making given how hard it can be to get barrels.
So... I was not happy to hear you have not been able to do the longer barrels... I have just been doing the research at this stage, Bill's barrel making video, the pope book. Ideally finding a slow method of drilling that did not require high pressure oil would suit me, if possible. Anyway, inspiring stuff, thanks for the incredible online journey.
-
- Senior Levergunner
- Posts: 1504
- Joined: Tue Sep 04, 2007 1:02 pm
- Location: Eastern Ohio, Foothills of Appalachia
- Contact:
Re: 40 Caliber Volcanic Rifle,
I..........uh............That is an absolute work of art.
My compliments, Sir.
Gobbler
My compliments, Sir.
Gobbler
Click Click Boom
- AJMD429
- Posting leader...
- Posts: 32276
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: 40 Caliber Volcanic Rifle,
YeahGobblerforge wrote:I..........uh............That is an absolute work of art.
My compliments, Sir.
Gobbler
er. . . what Gobblerforge said. . .
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: 40 Caliber Volcanic Rifle,
Display,
- Griff
- Posting leader...
- Posts: 20876
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: 40 Caliber Volcanic Rifle,
I think I've already expressed being over-awed by your accomplishment... so will just wonder aloud about that "flyer". You might consider shooting for that "group" by single loading. The flyer might be caused by some inherent balance being "upset" by the change from partially loaded magazine to empty magazine. Or load six, and see if that has an affect on balance and harmonics.
By the way, great display!
By the way, great display!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: 40 Caliber Volcanic Rifle,
I don't know how this slipped away from me for so long.
That turned out to be one of the most outstanding examples of awesomeness I have ever seen. I love how it all came together and the fact that she is a shooter only makes it better. Charlie you are to be commended.
That turned out to be one of the most outstanding examples of awesomeness I have ever seen. I love how it all came together and the fact that she is a shooter only makes it better. Charlie you are to be commended.
Jeremy
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: 40 Caliber Volcanic Rifle,
+1 Really, REALLY Outstanding!!!JReed wrote:I don't know how this slipped away from me for so long.
That turned out to be one of the most outstanding examples of awesomeness I have ever seen. I love how it all came together and the fact that she is a shooter only makes it better. Charlie you are to be commended.
-
- Levergunner 2.0
- Posts: 132
- Joined: Mon Sep 03, 2007 5:34 pm
- Location: Big Sky Country
Re: 40 Caliber Volcanic Rifle,
I'm on Leverguns almost every day....HOW DID I MISS THIS!!!
Reading this thread has been an absolute joy. The skill, the effort, the extended experience and the hard and careful work to develop your talents to produce this rifle were a real pleasure to read and enjoy.
Thanks very much...in a world too full of very mediocre products and skills, laced heavily with excuses, this has given me a strong realization and renewed hope that we still have first class craftsman and people among us.
Reading this thread has been an absolute joy. The skill, the effort, the extended experience and the hard and careful work to develop your talents to produce this rifle were a real pleasure to read and enjoy.
Thanks very much...in a world too full of very mediocre products and skills, laced heavily with excuses, this has given me a strong realization and renewed hope that we still have first class craftsman and people among us.
"Be kind and polite to everyone you meet; but have a plan on how to kill them." General Mattis
Re: 40 Caliber Volcanic Rifle,
I love it when someone re-discovers this thread! It's simply stunning work in my view.
BTW, I was at a gun show this weekend and one of the dealers had a Volcanic pistol in his case for sale. I asked him, "How much for the Volcanic?" His eyes lit up and he smiled and commented that he was happy I knew what it was. Oh, it was $7000 asking.
I did not come home with it.
Oly
BTW, I was at a gun show this weekend and one of the dealers had a Volcanic pistol in his case for sale. I asked him, "How much for the Volcanic?" His eyes lit up and he smiled and commented that he was happy I knew what it was. Oh, it was $7000 asking.
I did not come home with it.
Oly
Cheers,
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
Oly
I hope and pray someday the world will learn
That fires we don't put out will bigger burn
Johnny Wright
Re: 40 Caliber Volcanic Rifle,
Wow !!! Speechless !!! Don't know how I missed this thread untill today , But Amazing !!!!!
Do you still take the twins out of the case for a lil range time every now and again ?
And , also let us know when you start your next project !!
Do you still take the twins out of the case for a lil range time every now and again ?
And , also let us know when you start your next project !!
Phil
Re: 40 Caliber Volcanic Rifle,
All I can say is ''WOW'' . Yes the Volcanic is incredable. I've never seen one in person.
I had to settle for a Uberti Henry, but at least I got something.
Owen
I had to settle for a Uberti Henry, but at least I got something.
Owen
- AmBraCol
- Webservant
- Posts: 3664
- Joined: Fri Mar 30, 2007 8:12 am
- Location: The Center of God's Grace
- Contact:
Re: 40 Caliber Volcanic Rifle,
Henry McCann wrote:I'm on Leverguns almost every day....HOW DID I MISS THIS!!!
That's an easy one to answer. Like 90% or so of the folks on the forum, you simply ignore the stickies!
Paul - in Pereira
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon
http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
Re: 40 Caliber Volcanic Rifle,
Charlie wrote:HEY I LIKE THIS PLACE.
careful what you wish for, you might just get it.
"BECAUSE I CAN"
"BECAUSE I CAN"
Re: 40 Caliber Volcanic Rifle,
http://www.39online.com/videogallery/65 ... -Gun-Maker
That Girl with the camera told me every move to make.
I didn't get a chance to show these babies shuffling and shucking the cartridges
She was also the editor.
Did you hear the different sound between the Rifle and the Pistol?
They were shooting the same cartridge.
That Girl with the camera told me every move to make.
I didn't get a chance to show these babies shuffling and shucking the cartridges
She was also the editor.
Did you hear the different sound between the Rifle and the Pistol?
They were shooting the same cartridge.
Last edited by Charlie on Wed Oct 19, 2011 3:24 pm, edited 1 time in total.
Re: 40 Caliber Volcanic Rifle,
Thanks for the link, Charlie! You have a lot to be proud of!
Have you hugged your rifle today?
-
- Advanced Levergunner
- Posts: 9104
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 40 Caliber Volcanic Rifle,
When a man has a vision, and the skills and patience to execute that vision, miracles can happen. Thanks Charlie. You're blessed.
Re: 40 Caliber Volcanic Rifle,
Wish i had the Patience to build like that, your da man.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- wvfarrier
- Senior Levergunner
- Posts: 1473
- Joined: Mon Oct 28, 2013 9:27 am
- Location: West (by GOD) Virginia
Re: 40 Caliber Volcanic Rifle,
Patience hell....that is sheer genius and talent
A bondservant of our Lord, Christ Jesus
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: 40 Caliber Volcanic Rifle,
i am stunned at the work you do! love these early lever guns. my dream would be to have one built that handled 22 long rifle. what fun that would be.
there was a fellow in meteetse wyoming he advertised that he was going to make them. i contacted him, but i think he abandoned the project.
your skills simply amaze me.
there was a fellow in meteetse wyoming he advertised that he was going to make them. i contacted him, but i think he abandoned the project.
your skills simply amaze me.
cable