S&W - Will It Buff Out??

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
COSteve
Advanced Levergunner
Posts: 4082
Joined: Sun Jul 12, 2009 4:03 pm
Location: A little valley up in the Rockies

S&W - Will It Buff Out??

Post by COSteve »

Deleted
Last edited by COSteve on Thu May 01, 2014 3:47 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
Top
User avatar
FWiedner
Advanced Levergunner
Posts: 8863
Joined: Sat Sep 08, 2007 9:50 pm
Location: North Texas

Re: S&W - Will It Buff Out??

Post by FWiedner »

Oooh, what's the right word...?

Ouch.

:shock:
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.

History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
Top
Bill_Rights
Levergunner 2.0
Posts: 102
Joined: Sat Jan 30, 2010 6:32 pm
Location: Northern Virginia, USA

Re: S&W - Will It Buff Out??

Post by Bill_Rights »

What happened? How come there's no powder in the two cartridges that neighbor the barrel-aligned cartridge?
Top
Sixgun
Posting leader...
Posts: 19268
Joined: Sun Sep 16, 2007 7:17 pm

Re: S&W - Will It Buff Out??

Post by Sixgun »

Yep, a case full of Bullseye will do it everytime :D
This is Boring & Mindless……Wasted Energy
Top
model55
Levergunner 3.0
Posts: 754
Joined: Sun Sep 16, 2007 11:23 pm
Location: Utah

Re: S&W - Will It Buff Out??

Post by model55 »

A little weld here, a little there................
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: S&W - Will It Buff Out??

Post by Chuck 100 yd »

Now it`s a three shooter! :lol:
Top
User avatar
Old No7
Advanced Levergunner
Posts: 3731
Joined: Tue Dec 18, 2007 9:06 pm
Location: Southern Maine

Re: S&W - Will It Buff Out??

Post by Old No7 »

Gee, and I thought only Colt made open top revolvers?!?!?

(3rd time I've seen that pix on this site, but it's always an eye-opener...)

Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Top
User avatar
Ysabel Kid
Moderator
Posts: 28544
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:
Contact Ysabel Kid

Re: S&W - Will It Buff Out??

Post by Ysabel Kid »

Duct Tape! It fixes everything!!! :wink:
Image
Top
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: S&W - Will It Buff Out??

Post by pokey »

FWiedner wrote:Oooh, what's the right word...?

Ouch.

:shock:
yup.
careful what you wish for, you might just get it.

"BECAUSE I CAN"
Top
Alan Wood
Levergunner 3.0
Posts: 752
Joined: Sun Dec 28, 2008 11:41 pm

Re: S&W - Will It Buff Out??

Post by Alan Wood »

Hm
Pretty sure we've had this photo on the board in the last 6 months at least once. With a rather lengthy discussion of it at the time. Double charge was the verdict if I recall correctly.
Top
User avatar
Warhawk
Levergunner 3.0
Posts: 755
Joined: Tue Apr 03, 2007 3:35 am
Location: Hot Springs, Arkansas

Re: S&W - Will It Buff Out??

Post by Warhawk »

At least he didn't blow up a nice pre-lock gun .. :wink:
Top
Gun Smith
Levergunner 3.0
Posts: 975
Joined: Fri Sep 14, 2007 10:24 am

Re: S&W - Will It Buff Out??

Post by Gun Smith »

Am I wrong? I don't see a solid ,welded or forged, connection between the top strap and the receiver at the rear. Does the strap only slip into those ears? Or is it the picture?
Top
User avatar
TedH
Advanced Levergunner
Posts: 8356
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: S&W - Will It Buff Out??

Post by TedH »

The "ears" you see is the metal around the the rear sight. The sight sits in a groove and the rear is also relieved so the sight doesn't have to sit very high.
NRA Life Member
Top
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: S&W - Will It Buff Out??

Post by Rusty »

I don't thing you could ever buff it clean. I'd just parkerize it and call it good.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
Top
User avatar
claybob86
Senior Levergunner
Posts: 1907
Joined: Mon Apr 02, 2007 10:41 pm

Re: S&W - Will It Buff Out??

Post by claybob86 »

Rusty wrote:I don't thing you could ever buff it clean. I'd just parkerize it and call it good.
Oh, you're just lazy! :D
Have you hugged your rifle today?
Top
User avatar
gundownunder
Senior Levergunner
Posts: 1449
Joined: Fri Sep 07, 2007 12:02 pm
Location: Perth. Western Australia

Re: S&W - Will It Buff Out??

Post by gundownunder »

I'd go with Araldite first, then just buff off the irregularities.

Hey do you reckon the shooter noticed something not quite right when he pulled the trigger?
Bob
***********************************
You have got to love democracy-
It lets you choose who your dictator is going to be.
***********************************
Top
rjohns94
Advanced Levergunner
Posts: 10820
Joined: Thu Sep 06, 2007 6:02 pm
Location: York, PA

Re: S&W - Will It Buff Out??

Post by rjohns94 »

Does the factory warranty cover that? I hope that didn't leave a mark.
Mike Johnson,

"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
Top
User avatar
Griff
Posting leader...
Posts: 21176
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: S&W - Will It Buff Out??

Post by Griff »

no comment.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
User avatar
COSteve
Advanced Levergunner
Posts: 4082
Joined: Sun Jul 12, 2009 4:03 pm
Location: A little valley up in the Rockies

Re: S&W - Will It Buff Out??

Post by COSteve »

I'm guess buffing won't help so I'm voting for some J-B Weld and call it good. :P
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
Top
ladder13
Levergunner
Posts: 18
Joined: Wed Jan 13, 2010 3:17 pm
Location: New York

Re: S&W - Will It Buff Out??

Post by ladder13 »

I hope the shooter was not injured. Lots of "locked" Smiths out there, but a shortage of fingers.
Top
Sixgun
Posting leader...
Posts: 19268
Joined: Sun Sep 16, 2007 7:17 pm

Re: S&W - Will It Buff Out??

Post by Sixgun »

We sure have a lot of comedians here. Nice responses :D ------------------Sixgun
This is Boring & Mindless……Wasted Energy
Top
stretch
Advanced Levergunner
Posts: 2366
Joined: Wed Oct 03, 2007 7:15 pm

Re: S&W - Will It Buff Out??

Post by stretch »

Grips are still good.......
Top
Post Reply

Return to “General Discussion”