Yep, it's a big'un that ol' 50-140
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 474
- Joined: Fri Dec 26, 2008 1:10 pm
- Location: North Central Washington, USA
Yep, it's a big'un that ol' 50-140
Hey all - Shot against a guy shooting a 50-140 last weekend. He bought a set of my shooting sticks and asked if I could make a pivot pin out of one of his empties. For those of you that haven't rubbed up against a cartridge of this caliber, I thought I'd post a picture of one before I cut it up. It's standing there with one of my 45-70's. Best regards... Wind
You do not have the required permissions to view the files attached to this post.
-
- Levergunner 3.0
- Posts: 753
- Joined: Mon Dec 17, 2007 3:02 pm
- Location: North Arkansas
Re: Yep, it's a big'un that ol' 50-140
That just looks painful! 

Re: Yep, it's a big'un that ol' 50-140
oh yea, thats what I'm talking about!!!!
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
Re: Yep, it's a big'un that ol' 50-140
Uhhh, am I supposed to shoot it or smoke it? I don't think I'd be good for more than 2 or 3 of those in one day. 

But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
-
- Senior Levergunner
- Posts: 1263
- Joined: Mon Dec 17, 2007 7:57 pm
Re: Yep, it's a big'un that ol' 50-140
Too bad there is not a lever action big enough for one of those! Guess I'll have to 'make due' with a 50 alaskan or 50-110.
-
- Advanced Levergunner
- Posts: 6747
- Joined: Thu Mar 19, 2009 9:30 am
- Location: Lower Central NYS
Re: Yep, it's a big'un that ol' 50-140
Where can I get one and how much????????????????
I am already brown nosing the wife for one?????????????????
That one will work for our bear forums! For the Caliber/Gun
I am already brown nosing the wife for one?????????????????

That one will work for our bear forums! For the Caliber/Gun
Re: Yep, it's a big'un that ol' 50-140
Madman......I believe C. Sharps still makes the 50-140. Shiloh makes the original "Big Fifty" caliber of 50-90. Your looking at about 1800.00 minimum to get into one, and probably a good wait. Both would be a treasure to have. I would consider the recoil before I bought one of the big fifties, if I intended to shoot it much. I want a Shiloh in 45/70 as I just love my one functioning retina!
.

But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. Romans 5:8
Re: Yep, it's a big'un that ol' 50-140
I had Pac Nor build one on a #3 Ruger action about 7 years ago. This was before Rich had his stroke. Not terribly expensive. SSK will do one for you as well. A .45-70 #1 or #3 will easily handle that case. If I remember correctly, a little extractor work and a little milling of the top of the bolt is really all that is required to accept the larger O.D. of the rim. A .510 groove dia. barrel and you are in business. A THICK Kick-Ezz pad and a couple of mercury tubes in the butt would not hurt. BIG Fun, 1886.
Re: Yep, it's a big'un that ol' 50-140
I'll bet that's one expensive pivot pin.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: Yep, it's a big'un that ol' 50-140
I think I could relate to the size better if you put a 22LR round next to it. 

I know a whole lot about very little and nothing about a whole lot.
-
- Levergunner 2.0
- Posts: 474
- Joined: Fri Dec 26, 2008 1:10 pm
- Location: North Central Washington, USA
Re: Yep, it's a big'un that ol' 50-140
jdad - Well OK, here ya are... Wind
You do not have the required permissions to view the files attached to this post.
-
- Levergunner 2.0
- Posts: 185
- Joined: Tue Dec 18, 2007 1:11 am
- Location: NE Washington USA
Re: Yep, it's a big'un that ol' 50-140

NRA Benefactor Member
My mind is like a steel trap,
rusty and illegal in 37 states.
My mind is like a steel trap,
rusty and illegal in 37 states.
Re: Yep, it's a big'un that ol' 50-140
Thank you! Now I can relate to the size.Wind wrote:jdad - Well OK, here ya are... Wind


I know a whole lot about very little and nothing about a whole lot.
- Ysabel Kid
- Moderator
- Posts: 28542
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Yep, it's a big'un that ol' 50-140
Someone's compensating!
Just kidding. Darn, that looks like a hoot to shoot!
Just kidding. Darn, that looks like a hoot to shoot!

-
- Advanced Levergunner
- Posts: 6747
- Joined: Thu Mar 19, 2009 9:30 am
- Location: Lower Central NYS
Re: Yep, it's a big'un that ol' 50-140
$1800+ Ah!!
Just brown nosing aint going to cut it.
I have to think of somthing more than that.
Let me work on that,but boy one of those would be cool!
Just brown nosing aint going to cut it.
I have to think of somthing more than that.
Let me work on that,but boy one of those would be cool!

- Streetstar
- Advanced Levergunner
- Posts: 4098
- Joined: Sun Jan 11, 2009 5:58 am
- Location: Oklahoma
Re: Yep, it's a big'un that ol' 50-140
Sorry BMG --- this is likely the original "Big Fiddy"
----- Doug
Re: Yep, it's a big'un that ol' 50-140
Looks perfect for things such as dinosaur hunting and off-shore naval bombardment... 

Some people just need a sympathetic pat on the head.....with a hammer. Repeatedly.
-
- Levergunner 1.0
- Posts: 66
- Joined: Tue Jan 29, 2008 6:55 pm
- Location: On the Little Salmon River
Re: Yep, it's a big'un that ol' 50-140
My first thought was "Artillery Piece".
My second thought was "Ouch!!!!!!!!".
My second thought was "Ouch!!!!!!!!".
Thanx, Tim Kelley
NRA Life
SFC US Army Ret.
NRA Life
SFC US Army Ret.
- Shasta
- Senior Levergunner
- Posts: 1577
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: Yep, it's a big'un that ol' 50-140
Back in the late 80's I decided to get a Shiloh Sharps for silhouette shooting. I wasn't sure what caliber I wanted. A friend offered to loan me his Farmingdale Shiloh #3 in .50-140 along with a box of ammo to see if it might be what I wanted. The load was 130 grains of black powder under a 650 grain bullet.
I fired (offhand) thirteen rounds, and at every shot my hat would fall off and my shooting glasses fell down on my nose! After that many times picking up my hat and readjusting my glasses, I realized that I really wasn't having much fun! No way could I complete a forty round match with that thing.
I finally settled on a Montana Roughrider in .45-2 & 6/10 (.45-100). It is a fine rifle and I still have it, but as I got older, something smaller yet was needed. A Browning BPCR in .40-65 is taking over this year.
SHASTA
I fired (offhand) thirteen rounds, and at every shot my hat would fall off and my shooting glasses fell down on my nose! After that many times picking up my hat and readjusting my glasses, I realized that I really wasn't having much fun! No way could I complete a forty round match with that thing.
I finally settled on a Montana Roughrider in .45-2 & 6/10 (.45-100). It is a fine rifle and I still have it, but as I got older, something smaller yet was needed. A Browning BPCR in .40-65 is taking over this year.
SHASTA
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Re: Yep, it's a big'un that ol' 50-140
Or you can find an old howitzer and just have your smith rebore it and expand it for this cartridge 

-
- Senior Levergunner
- Posts: 1581
- Joined: Sun Dec 30, 2007 6:59 pm
- Contact:
Re: Yep, it's a big'un that ol' 50-140
How many packhorses does the guy use to carry one day's ammo?
Hunter Ed. instructor
NRA Basic pistol Inst.
NRA Personal protection inst.
NRA Range safety officer
Blessed is the man that walketh not in the counsel of the ungodly, nor standeth in the way of sinners, nor sitteth in the seat of the scornful. But his delight is in the law of the LORD; and in his law doth he meditate day and night. Psalm 1
NRA Basic pistol Inst.
NRA Personal protection inst.
NRA Range safety officer
Blessed is the man that walketh not in the counsel of the ungodly, nor standeth in the way of sinners, nor sitteth in the seat of the scornful. But his delight is in the law of the LORD; and in his law doth he meditate day and night. Psalm 1
-
- Levergunner 2.0
- Posts: 238
- Joined: Sat Sep 08, 2007 2:47 pm
- Location: Tidewater VA
Re: Yep, it's a big'un that ol' 50-140
I picked one up a couple of years ago , to go along with the 8 bore, it weighs in at 14lbs. favorite load is a duplex of FFG and a smokeless. smokeless is only 5 grains but t black is 120, have a mould that throws a 700 grain slug that looks like a WFN style . Have taken one black bear wih it , at just around 82 yards , typical responce bang flop.
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: Yep, it's a big'un that ol' 50-140
I was wondering if the wheeled carriage and ammo bearers are included in the price?Kelley wrote:My first thought was "Artillery Piece".
Cosmoline wrote:Or you can find an old howitzer and just have your smith rebore it and expand it for this cartridge

Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-
- Advanced Levergunner
- Posts: 5492
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: Yep, it's a big'un that ol' 50-140
Now that would make them Pro's in Africa set up and take notice of good old USA single shot buff guns.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
- Griff
- Posting leader...
- Posts: 21173
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Yep, it's a big'un that ol' 50-140
Well... since a 1lb of powder is 7,000 grains... Oh heck... I need my scale here to determine how many grains by weight there are in 140 grains by volume. I'll just say it's a tad less than ¾ of what I get outta a pound for my .40-90SBN, and it eats thru a pound of powder rather rapidly!jdad wrote:Thank you! Now I can relate to the size.Wind wrote:jdad - Well OK, here ya are... WindOne can of powder for a dozen or so rounds.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Levergunner 3.0
- Posts: 709
- Joined: Wed Sep 12, 2007 8:25 pm
- Location: Arnett WV
- Contact:
Re: Yep, it's a big'un that ol' 50-140
I have a 50-90SS on a Remington Rolling block that is a great shooter. With the 26" barrel it's actually pretty handy in the woods. I may carry it in the Sept. black bear season. The recoil isn't bad, but an extended session becomes very uncomfortable. The 50-140 is even bigger!
SASS#43836
Ain't easy havin' pals.
Ain't easy havin' pals.