Question? .45colt FPS in 20" carbine

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
JerryB
Advanced Levergunner
Posts: 5492
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Question? .45colt FPS in 20" carbine

Post by JerryB »

Yesterday I loaded 25 rounds of .45 Colt with a 255gr cast bullet and 9.0 grains of Unique. It will be awhile before I see my friend with the chronograph and I am wondering what kind of velocity I can expect with this load from my Rossi 92 .45?
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:

Re: Question? .45colt FPS in 20" carbine

Post by Hobie »

I imagine you'll get 1150-1250 fps. A lot is dependent (it seems) on how your gun is chambered and bored.
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
JerryB
Advanced Levergunner
Posts: 5492
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by JerryB »

Thanks Hobie, I didn't expect anything in the 1700's, just wanted an idea.
I reckon that would put down an Arkansas deer.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
SmokeEater2
Levergunner 3.0
Posts: 753
Joined: Mon Dec 17, 2007 3:02 pm
Location: North Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by SmokeEater2 »

JerryB wrote:Thanks Hobie, I didn't expect anything in the 1700's, just wanted an idea.
I reckon that would put down an Arkansas deer.

I'll bet it'll do just fine for deer. Are You going to use it it this fall? That rifle would be downright handy in the brush.
JerryB
Advanced Levergunner
Posts: 5492
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by JerryB »

I'll carry it and see what happens. I put in for the elk permit but you know what the chances of that are, did you apply this year? I thought about using it for elk if I was blessed with a permit, that or the 45-70,or a 30-30.
Have you seen how the bonus doe permits were changed?Will you hunt down by Sylamore this year?
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
zack coyote
Levergunner 1.0
Posts: 82
Joined: Sun Oct 07, 2007 3:10 pm
Location: East Texas
Contact:

Re: Question? .45colt FPS in 20" carbine

Post by zack coyote »

8 gr. of Unique behind a 250 gr. cast bullet got me 1083 fps. out of my 20" Rossi Carbine. I expected a little more, but it will do.
We'll be remembered for what we've done, not what we have.
www.johndietzstudio.com
SmokeEater2
Levergunner 3.0
Posts: 753
Joined: Mon Dec 17, 2007 3:02 pm
Location: North Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by SmokeEater2 »

JerryB wrote:I'll carry it and see what happens. I put in for the elk permit but you know what the chances of that are, did you apply this year? I thought about using it for elk if I was blessed with a permit, that or the 45-70,or a 30-30.
Have you seen how the bonus doe permits were changed?Will you hunt down by Sylamore this year?

Yes I put in for an Elk tag and if I ever get one the .45-70 will get the nod for that hunt for sure. I will be hunting Sylamore and Moccasin creek both this year. I didn't know anything about the doe permit change (put in for one of those too) so I'll have to check AGFC's website. Thanks for the heads-up.
SmokeEater2
Levergunner 3.0
Posts: 753
Joined: Mon Dec 17, 2007 3:02 pm
Location: North Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by SmokeEater2 »

JerryB, I checked the website and I'm glad to see that "doe days" are back we have a heck of a lot of does around here.
User avatar
O.S.O.K.
Advanced Levergunner
Posts: 5533
Joined: Sun Apr 27, 2008 4:15 pm
Location: Deep in the Piney Woods of Mississippi

Re: Question? .45colt FPS in 20" carbine

Post by O.S.O.K. »

General rule of thumb is that the long barrel will add roughly 20% to your pistol velocity.
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
JerryB
Advanced Levergunner
Posts: 5492
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: Question? .45colt FPS in 20" carbine

Post by JerryB »

zack coyote, thanks for the load data, I looked in my notebook and found the load I tested last year was the same as yours, 8.0 grains of Unique with a 255 haed cast swc. Average fps was 1069, pretty close to yours must be a good load.
Thanks for all the good replies from ya'll.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
adirondakjack
Senior Levergunner
Posts: 1925
Joined: Mon Dec 17, 2007 7:09 pm
Location: Upstate NY
Contact:

Re: Question? .45colt FPS in 20" carbine

Post by adirondakjack »

Hobie wrote:I imagine you'll get 1150-1250 fps. A lot is dependent (it seems) on how your gun is chambered and bored.
That matches my experience. In a 24" Marlin, I ran 10.5 U and a 250 for 1375 fps (fast enough to get on the steel at 300 yards with a tang sight, overcoming about 9ft of drop.....). So 1200 comes to mind as just about right.
Certified gun nut
Post Reply