Oops - really, REALLY clean brass
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Ysabel Kid
- Moderator
- Posts: 27910
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Oops - really, REALLY clean brass
I purchased the .45 Colt "shorties" brass from Gunsmith a couple weeks ago and decided to run it through my tumbler for an hour to shine them up before loading them. They came in clean - I just like them "extra clean".
Well, I started them at lunch, and then promptly forgot about them while working. Around 8:00pm tonight I suddenly remembered I had a batch going - and it had been going for 7+ hours!
Well, nothing was hurt - not the brass and not the tumbler. And the brass are now really, REALLY clean!
Well, I started them at lunch, and then promptly forgot about them while working. Around 8:00pm tonight I suddenly remembered I had a batch going - and it had been going for 7+ hours!
Well, nothing was hurt - not the brass and not the tumbler. And the brass are now really, REALLY clean!
-
- Advanced Levergunner
- Posts: 4427
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Oops - really, REALLY clean brass
Sure am glad I've never done anything like that!
- Griff
- Posting leader...
- Posts: 20869
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Oops - really, REALLY clean brass
YK, that's a SHORT cleaning session for my .45 Colt brass. I usually dump it in, turn it on, and forget it till the next day. But, then again, I'm cleaning after using BP!Ysabel Kid wrote:... - and it had been going for 7+ hours!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: Oops - really, REALLY clean brass
Next day? Wasn't there an episode where you remembered it the next month?Griff wrote:YK, that's a SHORT cleaning session for my .45 Colt brass. I usually dump it in, turn it on, and forget it till the next day.Ysabel Kid wrote:... - and it had been going for 7+ hours!
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
- Andrew
- Advanced Levergunner
- Posts: 2043
- Joined: Thu Sep 06, 2007 5:30 pm
- Location: Southern Missouri
Re: Oops - really, REALLY clean brass
I remember that one.awp101 wrote:Next day? Wasn't there an episode where you remembered it the next month?
- El Chivo
- Advanced Levergunner
- Posts: 3612
- Joined: Mon Sep 03, 2007 5:12 pm
- Location: Red River Gorge Area
Re: Oops - really, REALLY clean brass
I have mine set up on a timer, mostly so it doesn't overheat. It cleans for two 45 minute periods per day. If I oversleep it wakes me up in the worst way.
This reminds me of another question, what would happen if you used sand instead of corn cobs?
This reminds me of another question, what would happen if you used sand instead of corn cobs?
"I'll tell you what living is. You get up when you feel like it. You fry yourself some eggs. You see what kind of a day it is."
Re: Oops - really, REALLY clean brass
It would wear through the tub...El Chivo wrote:...what would happen if you used sand instead of corn cobs?
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Re: Oops - really, REALLY clean brass
Over night is the minimum that I clean brass and often longer. I like clean brass .
Ricky
DWWC
DWWC
Re: Oops - really, REALLY clean brass
7 hours is about a normal session for my brass. Overnight is not uncommon for really dirty stuff.
NRA Life Member
Re: Oops - really, REALLY clean brass
I'm with Ricky, I like really clean brass. I only have the small Frankford Arsenal vibrator, so I try not to leave it on for more than 3-4 hours at a time, but I have forgotten about it for six or seven. Generally I do two sessions, one before and one after I deprime. At some point, I need to get a more robust one that holds more brass and that I can leave run for 6-7 hours.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
-
- Advanced Levergunner
- Posts: 4427
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Oops - really, REALLY clean brass
Do you use any liquid polishing agent in your media. I used to use the expensive stuff sold for the purpose, but have discovered NuFinish, the auto polish is the same stuff or better and only costs about a third as much, readily available at Wallyworld. Throw in a few teaspoons with your media and watch 'em come out nice and shiney in about 45 minutes. No, it doesnt turn the brass brittle or any such urban legends, been using it for a long time.
Re: Oops - really, REALLY clean brass
I like to use what ever cheap auto rubbing compound that comes in a squeeze bottle. I add some every 3 or 4 loads or as needed. If the brass come out dusty, I add some.
Ricky
DWWC
DWWC
Re: Oops - really, REALLY clean brass
Every 3-4 loads I add some more of the cleaning liquid from Frankford or some Flitz. I haven't tried some of the car polish products yet, by may try NuFinish (I have a can around somewhere).
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
- Rimfire McNutjob
- Advanced Levergunner
- Posts: 3158
- Joined: Mon Sep 03, 2007 2:51 pm
- Location: Sanford, FL.
Re: Oops - really, REALLY clean brass
Does anyone use the liquid dip cleaners like the Iosso stuff?
... I love poetry, long walks on the beach, and poking dead things with a stick.
-
- Advanced Levergunner
- Posts: 4427
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: Oops - really, REALLY clean brass
NuFinish is a liquid, comes in an orange squeeze bottle.alnitak wrote:Every 3-4 loads I add some more of the cleaning liquid from Frankford or some Flitz. I haven't tried some of the car polish products yet, by may try NuFinish (I have a can around somewhere).
- Modoc ED
- Advanced Levergunner
- Posts: 3332
- Joined: Thu Sep 20, 2007 11:17 am
- Location: Northeast CA (Alturas, CA)
Re: Oops - really, REALLY clean brass
I tried Iosso once. The added time (wiping down and drying time) wasn't worth the results -- no better than walnut media in my opinion.Rimfire McNutjob wrote:Does anyone use the liquid dip cleaners like the Iosso stuff?
I guess I'm the odd-one-out. When I do tumble brass, I don't use any cleaner mixed in the media and I only tumble the brass for right at an hour. That gets it clean enoug for me -- knocks of and removes dirt, grime, stains, etc.
Re: Oops - really, REALLY clean brass
MODOC ED - i am with you . straight walnut media and about an hour or two max. Now the BP 45 -70 brass gets cleaned by hand in soapy water then tumbled.
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
- Modoc ED
- Advanced Levergunner
- Posts: 3332
- Joined: Thu Sep 20, 2007 11:17 am
- Location: Northeast CA (Alturas, CA)
Re: Oops - really, REALLY clean brass
One thing about Iosso and other liquid cleaners is that if you want to clean up some cases to reload right away, you have to be doubly and then tripley sure that the cases are DRY. If not, you run the risk of loading a round or rounds with droplets of water in the case thus producing duds.
With dry media, you just have to remove the cleaned case from the media, tap out any median in the case, and you are good to go to reload it.
With dry media, you just have to remove the cleaned case from the media, tap out any median in the case, and you are good to go to reload it.
- Ysabel Kid
- Moderator
- Posts: 27910
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Oops - really, REALLY clean brass
Well, the brass was shipped already tumbled clean, but I was just being nit-picky!
Actually, my usual routine for dirty brass is 3 hours in a tumbler with crushed walnut media. This is the "dirty" mix. Brass is removed, media is removed, and media with polishing compound is replaced. Another 3 hours in that. Brass is removed, media is removed, and then 1-2 hours in with "clean" crushed walnut media. Brass is in for a total of 7-8 hours, maybe 9+ if it was really dirty to begin with. Usually comes out squeaky clean and looking like new after that routine.
I was just commenting that 7 hours for one phase is a bit much!
Actually, my usual routine for dirty brass is 3 hours in a tumbler with crushed walnut media. This is the "dirty" mix. Brass is removed, media is removed, and media with polishing compound is replaced. Another 3 hours in that. Brass is removed, media is removed, and then 1-2 hours in with "clean" crushed walnut media. Brass is in for a total of 7-8 hours, maybe 9+ if it was really dirty to begin with. Usually comes out squeaky clean and looking like new after that routine.
I was just commenting that 7 hours for one phase is a bit much!
Re: Oops - really, REALLY clean brass
YK,
Do you change the media like that every time? I change media maybe once a year. I like the Lyman treated walnut, works real well I think. Here while back I bought some crushed walnut from the pet store and use it in one of my tumblers, it seems a little course and doesn't give a nice shine, but it does clean very well. I heard, but never tried, of using used dryer sheets thrown into the tumbler to clean the media. I may have to try this.
Do you change the media like that every time? I change media maybe once a year. I like the Lyman treated walnut, works real well I think. Here while back I bought some crushed walnut from the pet store and use it in one of my tumblers, it seems a little course and doesn't give a nice shine, but it does clean very well. I heard, but never tried, of using used dryer sheets thrown into the tumbler to clean the media. I may have to try this.
Ricky
DWWC
DWWC
-
- Advanced Levergunner
- Posts: 2569
- Joined: Sat Sep 15, 2007 12:51 pm
Re: Oops - really, REALLY clean brass
Same here.. no additive cleaners... The thing I noticed that dramatically improved cleaning on my vibratory cleaner (Ultra Vibe 10 Thumler's Tumbler) is leaving the lid off...Visibly more oscillations per minute...I can run more media.. more brass..
"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
WIL TERRY
- Rimfire McNutjob
- Advanced Levergunner
- Posts: 3158
- Joined: Mon Sep 03, 2007 2:51 pm
- Location: Sanford, FL.
Re: Oops - really, REALLY clean brass
I guess what I do is a bit odd. I have an electric screwdriver mounted bronze bristle brush that I run into a decapped case that's full of soapy water. Then I rinse each individually and then dip the batch into the Iosso for about 30 seconds to a minute. Then another rinse and then to the oven in a stainless collander to heat up to about 180degF for about 20 minutes. Then I pull them out and air dry them. Their latent heat from being in the oven causes them to air dry rather quickly.
... I love poetry, long walks on the beach, and poking dead things with a stick.
Re: Oops - really, REALLY clean brass
My routine is somewhat similar. I have the crushed walnut for the intial "heavy" cleaning -- generally 2-3 hours. This is a batch I've used before (and use until it gets noticeably gray-black from the carbon residue). Then I deprime and run the brass through a second batch -- this is usually crushed corn cob that is treated. I find the corn cob seems to make it shinier than the walnut. (Probably no difference though; tough to tell.) It's in the second "spin" cycle for another 2-3 hours, then I'm done.Ysabel Kid wrote:Actually, my usual routine for dirty brass is 3 hours in a tumbler with crushed walnut media. This is the "dirty" mix. Brass is removed, media is removed, and media with polishing compound is replaced. Another 3 hours in that. Brass is removed, media is removed, and then 1-2 hours in with "clean" crushed walnut media. Brass is in for a total of 7-8 hours, maybe 9+ if it was really dirty to begin with. Usually comes out squeaky clean and looking like new after that routine.
I rotate media every few months as it gets really dirty or dusty.
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail
-
- Senior Levergunner
- Posts: 1079
- Joined: Thu Nov 13, 2008 10:13 pm
- Location: Colorado
Re: Oops - really, REALLY clean brass
That's an awful lot of work for something that's just going to get that dirty again as soon as you use it. I use Iosso and find it needs a whole lot of rinsing, but it's still way easier than changing media, several tumbling steps, etc. I only need my brass clean, not sterile.
A man's admiration for absolute government is proportionate to the contempt he feels for those around him.
Alexis de Tocqueville
Alexis de Tocqueville
- Ysabel Kid
- Moderator
- Posts: 27910
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Oops - really, REALLY clean brass
Ricky -RKrodle wrote:YK,
Do you change the media like that every time? I change media maybe once a year. I like the Lyman treated walnut, works real well I think. Here while back I bought some crushed walnut from the pet store and use it in one of my tumblers, it seems a little course and doesn't give a nice shine, but it does clean very well. I heard, but never tried, of using used dryer sheets thrown into the tumbler to clean the media. I may have to try this.
Oh no! That's why I do it this way, so I only have to change the media once a year or so. Just depends on how much brass I cleaned that year and how dirty it was to start off with. What I usually do it "demote" each batch, pitching out the dirtiest media that I start the process with, and taking the 2nd batch to become the first, the 3rd batch becomes the 2nd, and new media becomes the final (3rd) batch. I haven't tried the dryer sheets, though I do have them in my reloading area. I use them to wipe off the sifter and 5-gallon pail (where I pour the media), which helps knock down the static cling that hangs up a lot of the media. I'm going to throw one in the next time to the final batch to see how it does!
- Old Time Hunter
- Advanced Levergunner
- Posts: 2388
- Joined: Sun Apr 01, 2007 11:18 am
- Location: Wisconsin
Re: Oops - really, REALLY clean brass
Seems that I misplaced my tumbler....actually keep forgetting to buy one. Just use a bucket of hot water, a couple of squirts of good dish soap, about 15% vinegear, and a table spoon of salt. dump the dirty cartridges in and swish around real good, let 'em sit a 1/2 hour our so and swish them around again. Rinse in your wife's caldrone, wipe down with her towel, and wrap 'em up in her apron pocket before toss'n 'em in the dryer for a half hour or so. They come out all sparkly. Or after wipe'n 'em off with the towel you can throw 'em back in the caldrone and let 'em air dry over night. But that is not any fun, 'cause it doesn't get the wife in a tither.Rimfire McNutjob wrote:Does anyone use the liquid dip cleaners like the Iosso stuff?
Re: Oops - really, REALLY clean brass
In the beginning, I used just about every home-made recipe for brass cleaning solution there is on the net. There were also a couple of long threads on this board (old forum) about various concoctions. They worked OK, but never got the brass as shiny as the vibrator (more a dull sheen, sometimes with a pink tone). After a while, I started a thread on the "chemistry" of such home-made brews, and the bottom line was that many of them had the potential to impact the integrity of the brass. While I never personally experienced that, I stopped using them and just bought the vibratory cleaner. Never looked back.Old Time Hunter wrote:Seems that I misplaced my tumbler....actually keep forgetting to buy one. Just use a bucket of hot water, a couple of squirts of good dish soap, about 15% vinegear, and a table spoon of salt. dump the dirty cartridges in and swish around real good, let 'em sit a 1/2 hour our so and swish them around again. Rinse in your wife's caldrone, wipe down with her towel, and wrap 'em up in her apron pocket before toss'n 'em in the dryer for a half hour or so. They come out all sparkly. Or after wipe'n 'em off with the towel you can throw 'em back in the caldrone and let 'em air dry over night. But that is not any fun, 'cause it doesn't get the wife in a tither.
However, I do like the idea of using the wife's goodies to help in the process!
"From birth 'til death...we travel between the eternities." -- Print Ritter in Broken Trail