Gentlemen,
Do you or does anyone you know have a Lyman #2 tang sight mounted on the tang of their [ Taylor's&Co or other] M1876 rifle ? I'm trying to figure out if the Lyman No2 has enough height adjustment.
Lyman No. 2 sight on a M1876
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
Electric Factory
- Levergunner
- Posts: 37
- Joined: Sun Sep 23, 2007 6:15 pm
- Location: San Fernando
-
kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Lyman No. 2 sight on a M1876
Can't tell you the answer to your question, but I'm interested in the Italian repro information. I'm getting my whistle ready for a '76 myself and I need all the information this collective forum of professor's can provide.
Old Law Dawg
Re: Lyman No. 2 sight on a M1876
The Lyman #2 for the 1894 or 1892 will most likely not be tall enough. You will have to get the Lyman #2 that is made for the 1886, which has a taller stem.
If you have a nice rifle like that, it would pay to put the NEW windage adjustable Marbles tang sight on it. With that sight, you can interchange stems, available at Buffalo Arms.--------Sixgun
If you have a nice rifle like that, it would pay to put the NEW windage adjustable Marbles tang sight on it. With that sight, you can interchange stems, available at Buffalo Arms.--------Sixgun
This is Boring & Mindless……Wasted Energy