Titegroup in a Dillon 550B

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
LeverBar
Levergunner 2.0
Posts: 165
Joined: Tue Sep 11, 2007 3:07 am
Location: Oregon

Titegroup in a Dillon 550B

Post by LeverBar »

Just a report for those who are interested.

In one of last weeks posts, I was concerned about the Dillon powder thrower's consistency. After loading .32-20, .380 auto, 9mm, and .44 mag, it was quite good. Whenever I weighed a test or check load, the thrower was right on with the Titegroup.

For other loads, I'll have to see how it does with H4895, H380, AA-7, and AA-1680. I'm thinking it might not be so accurate in throwing H4895. H380 should be sweet. We'll see!
Top
ajw65
Levergunner
Posts: 9
Joined: Mon Dec 10, 2007 6:55 pm

Post by ajw65 »

I agree I have loaded thousands of rounds with Titegroup with this set up. I always check the first and the hundreth charge for weight. Very consistent.
Top
Post Reply

Return to “General Discussion”