BSQUARE mount for m92 rossi

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
hps
Levergunner
Posts: 6
Joined: Thu Jul 31, 2008 4:10 pm

BSQUARE mount for m92 rossi

Post by hps »

BSquare scope mount for rossi m92 44 mag who has one of these and could i see pics? does this mount sit off the side of the receiver or doe the scope LINE UP down the center of the receiver?
Nate Kiowa Jones
Site Sponsor
Posts: 2508
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: BSQUARE mount for m92 rossi

Post by Nate Kiowa Jones »

I don't have a picture but it's an aluminum side mount. Reports I have got is it's not to stable, won't hold zero.

This is what I'm doing.

Scout scope red dot.
Image

Red dot Halo
Image
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
User avatar
Tycer
Advanced Levergunner
Posts: 7759
Joined: Sun Sep 02, 2007 10:17 am
Location: Asheville, NC

Re: BSQUARE mount for m92 rossi

Post by Tycer »

Steve,

How's that halo handle and shoot?
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Nate Kiowa Jones
Site Sponsor
Posts: 2508
Joined: Fri Sep 07, 2007 12:05 pm
Location: Lampasas, Texas
Contact:

Re: BSQUARE mount for m92 rossi

Post by Nate Kiowa Jones »

Tycer wrote:Steve,

How's that halo handle and shoot?
It still sits up a little higher than I like. Instead of a cheek weld it's more like a chin well.

I'm look at the Burris FastFire. It can be mounted low and it's only about an 1 1/2" long and the window is about 3/4" by 1/2". it should be a much neater installation.

ImageImage
Steve Young aka Nate Kiowa Jones Sass# 6765

Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550


http://www.stevesgunz.com

Email; steve@stevesgunz.com

Tel: 512-564-1015

Image
hps
Levergunner
Posts: 6
Joined: Thu Jul 31, 2008 4:10 pm

Re: BSQUARE mount for m92 rossi

Post by hps »

Steve, whats ur price to mount a peep sight? something like the Williams FP. Its a Rossi 44 mag 16" barrel. The receiver will need to be drilled and tapped correct?
bbleverfan
Levergunner 1.0
Posts: 58
Joined: Sun Nov 30, 2008 11:46 am

Re: BSQUARE mount for m92 rossi

Post by bbleverfan »

i once fell for the b-square side mount on my 454 it was loose and ready to fall off after 3 shots and the scope ring base screws one of them striped during instalation
Post Reply