Rossi 357 LA? Son wants to put a receiver site on his SS LA and need advice.
thanks
shawn
how difficult is it to put a receiver peep site on a M92
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: how difficult is it to put a receiver peep site on a M92
Best to ask Nate Kiowa Jones, also known as Steve. His links and DVD should help you to do the job yourself if you want to. www.stevesguns.com I think is the website.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: how difficult is it to put a receiver peep site on a M92
Had one put on mine 2 years ago, he charged $30. Would of only charged $5 per hole but he had to take action apart so he wouldnt drill to deep, was a little peeved about it at first , but he did a 1st rate job and it was well worth it. But had gotten other quotes of $40 to $100.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: how difficult is it to put a receiver peep site on a M92
It's a simple task if you're a little bit handy with tools.
There's a very good how to article here.
http://www.beartoothbullets.com/tips/index.htm
There's a very good how to article here.
http://www.beartoothbullets.com/tips/index.htm
NRA Life Member
Re: how difficult is it to put a receiver peep site on a M92
If I had another M-92 to peep, I'd put an XS peep atop the receiver siderails, straddling the locking lugs, over the bolt top - one hole D/T on each side, leaving the sides neat/clear.
.
.
Re: how difficult is it to put a receiver peep site on a M92
Pete44ru wrote:If I had another M-92 to peep, I'd put an XS peep atop the receiver siderails, straddling the locking lugs, over the bolt top - one hole D/T on each side, leaving the sides neat/clear.
.
Me too Pete. I mounted a Williams on mine myself, but I like the look of the XS on top better. If you decide to do it yourself, make sure you mount the top of the base flush with the top of the locking bolts. It is real common to have the sight mounted too low on the receiver if you don't study it carefully before you start drilling. Don't ask me how I know!
Derek aka "shootnfan"
Middle Tennessee
24 hours in a day.....24 beers in a case. Coincidense? I think not.
Middle Tennessee
24 hours in a day.....24 beers in a case. Coincidense? I think not.