Hold/position sensitivity?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5566
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Hold/position sensitivity?

Post by Scott Tschirhart »

I find that some air rifles, particularly spring air rifles, are very sensitive as to how you hold them. If you are very consistent, your gun will shoot noticeably better.

I’ve never thought about this with firearms but I’m wondering about it. I know that the more consistent you can be with a SAA the better it will shoot. But have any of you experienced position sensitivity with rifles?
stretch
Advanced Levergunner
Posts: 2390
Joined: Wed Oct 03, 2007 7:15 pm

Re: Hold/position sensitivity?

Post by stretch »

Springers can be remarkably unforgiving to bad technique.

The good news is that once you can shoot a springer well and
practice with it, you can't help but be better with a conventional
rifle.

I'm not a great rifle shot, but I have yet to own a conventional rifle that's as
finicky concerning technique as my RWS 48.

-Stretch
User avatar
Old No7
Advanced Levergunner
Posts: 3772
Joined: Tue Dec 18, 2007 9:06 pm
Location: Southern Maine

Re: Hold/position sensitivity?

Post by Old No7 »

Scott Tschirhart wrote: Sun Nov 23, 2025 1:51 pm I find that some air rifles, particularly spring air rifles, are very sensitive as to how you hold them. If you are very consistent, your gun will shoot noticeably better.

I’ve never thought about this with firearms but I’m wondering about it. I know that the more consistent you can be with a SAA the better it will shoot. But have any of you experienced position sensitivity with rifles?
Yes, on the spring air rifles for sure! And some guns with 2-piece stocks -- like leverguns -- can be very sensitive to where they're held. They might shoot well off the bench, but hit differently when shot offhand with a gloved hand. For my hunting leverguns, I put my gloved hand under the forearm (right where I'd hold it when out hunting) and sight it in that way -- and it does help.

Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Rockrat
Levergunner 3.0
Posts: 535
Joined: Wed Dec 19, 2018 8:35 pm
Location: Colorado

Re: Hold/position sensitivity?

Post by Rockrat »

Yes. Good friend of mine had a Browning Bar in 308 win (boy, he regrets selling that) that would normally shoot about 2-3" @100yds, but if he concentrated on his hold, it would shoot under an inch at the same range. Any slight deviation and groups would open up rapidly
User avatar
Scott Tschirhart
Advanced Levergunner
Posts: 5566
Joined: Fri Oct 16, 2020 2:56 pm
Location: San Antonio, Texas

Re: Hold/position sensitivity?

Post by Scott Tschirhart »

I just don’t shoot from a bench. Haven’t shot from a bench for more than 20 years.

None of my field shots are from a bench so I just don’t use one.
User avatar
AJMD429
Posting leader...
Posts: 33911
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland

Re: Hold/position sensitivity?

Post by AJMD429 »

.
I’ve seen experienced shooters post comments that the position of the rifle BEFORE they shoot, as in which way the powder tends to be positioned in the cartridge, may make a difference. Obviously, that would be only a factor for loads with empty space between powder and bullet, and from what I recall, reading, was only the case with some of the ‘low volume’ powders, but not all of them.

I think generally the solution for that problem was that they made it a habit to point the muzzle of the rifle up in between shots. Not necessarily practical with hunting or defensive use of a gun, but usually a bit less accuracy is acceptable there versus signing in or competing at an event.
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
Post Reply