94AE Half Cock Conversion Parts

Bruce Scott · Post by **Bruce Scott** » Mon Oct 08, 2007 6:09 am

With the old site down I need advice on the parts needed to convert my 94AE .30-30 Legacy to half cock configuraion.

Numrich seem to have plenty of parts....

salvo · Post by **salvo** » Mon Oct 08, 2007 10:19 am

94 Conversion Parts
Hi Bruce, here is the link to Numrich with the parts you need.
http://www.e-gunparts.com/productschem. ... 20STANDARD

Hammer #301730 $40.60 - In stock
Hammer Spring #301920 $2.70 - Out of stock
Hammer Spring Guide #301750 $4.30 - Out of stock
Trigger #302050 $18.10 - In stock
Sear #302060 $8.80 - Out of stock

They have been out of the hammer spring, guide and sear for a wile now Crying or Very sad
I ended buying a complete lower tang from Malamute. If you can find one it is usually cheaper than buying the parts separately.
Good luck.

salvo · Post by **salvo** » Mon Oct 08, 2007 10:25 am

Also Tycer let me know that the parts that are out of stock are the same parts Winchester used on the Big Bore 94, but I did not get that far to check it out.
Also I may have a lead for you on some sear's in Canada if you come up short.

Bruce Scott · Post by **Bruce Scott** » Tue Oct 09, 2007 8:12 am

Thanks Scott, that's just what I need.

BlaineCGarverakaTubbyTuba · Tue Oct 09, 2007 10:11 am

Whew...I thought it was another Bob Dole advertisement.......