.
This got me thinking I need to get my several 10/22 rifles out someday and see which ones are the most accurate.
https://youtu.be/pQ0z8r8HW-Y
I wonder how much just swapping bolts between guns to vary the headspace might do…
Accurizing a 10/22
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Accurizing a 10/22
It's 2025 - "Cutesy Time is OVER....!" [Dan Bongino]
-
GunnyMack
- Advanced Levergunner
- Posts: 11491
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Accurizing a 10/22
The best thing for a 10/22 is bed the barrel channel and let the action float. I did that with a Shilen .920" bull barrel and it would keep 10 inside a penny at 50 yards with CCI Green Tag. Like a fool I was trying some Russian subsonic and had a squib during a mag dump and ruined the barrel by putting a ring in it just at the forend. I've since replaced the barrel with a carbon fiber wrapped, it's no where near as accurate.
BROWN LABS MATTER !!
-
Paladin
- Advanced Levergunner
- Posts: 2191
- Joined: Mon Jan 21, 2008 9:55 am
- Location: Not Working (much)
Re: Accurizing a 10/22
I built one for squirrel hunting, then NRL 22 with different parts over the years, from the 80s when I bought it. Volkerson Match Barrel, Trigger pack, threaded for a suppressor, and took it LUPA to have it matched to a .22 LR round, and it gets 1/2 inch at 100 yards from their chart, and won me a few matches in my age group before I stopped shooting.
You do not have the required permissions to view the files attached to this post.
It is not the critic who counts