Powder Valley fire - update 2025-08-24

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
AmBraCol
Webservant
Posts: 3806
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Powder Valley fire - update 2025-08-24

Post by AmBraCol »

Powder Valley Outdoors
To our Powder Valley family,

We’re okay.

The calls you get at 3 a.m. are never the ones you want. Early Sunday morning, a fire tore through our primary warehouse and offices. It’s a devastating, total loss of the building and the inventory inside.

What matters most is that every member of the Powder Valley family is safe, and so are the first responders who showed up for us. We’re profoundly grateful.

This is a hard time. But this community scraps and fights and lifts each other up. We’re going to rally, rebuild, and come back stronger.

If you placed an order:

Orders that already shipped will continue moving with tracking as normal.
For orders not yet shipped, we’re auditing each one. If we can’t fulfill it, we will make it right — refund or an alternative you approve. Powder Valley will continue to do the right thing where our customers are concerned.


How to reach us:
Our phones are temporarily offline while we set up an interim solution. Please email reload@powdervalley.com. We’re answering as fast as we can — thank you for bearing with us during this time.

Many of you have asked how you can help. This community truly is special, and we appreciate everyone's concern and support. We have a limited selection of products that were stored at a different facility and are ready to ship now. If you’d like to support us during this time, you can shop from that selection here: Products available to ship now. We also have Digital Gift Cards — usable today on the shippable items or later when our full inventory returns: Gift cards here.

We welcome and appreciate continued prayers for our Powder Valley family as we navigate this difficult time.

We’ll keep our status page updated as we work through recovery and next steps. You can find that page linked here. Thank you for standing with us — today and in the days ahead.

With gratitude and resolve,
Bryan, Noel, and the Powder Valley Team
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
Crazy Horse
Levergunner 2.0
Posts: 155
Joined: Fri Dec 21, 2007 6:32 pm

Re: Powder Valley fire

Post by Crazy Horse »

I am glad nobody was hurt
User avatar
Paladin
Advanced Levergunner
Posts: 2113
Joined: Mon Jan 21, 2008 9:55 am
Location: Not Working (much)

Re: Powder Valley fire

Post by Paladin »

Crazy Horse wrote: Mon Aug 11, 2025 9:43 am I am glad nobody was hurt
+1
It is not the critic who counts
User avatar
GunnyMack
Advanced Levergunner
Posts: 11259
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Powder Valley fire

Post by GunnyMack »

Certainly very sad to hear, but happy no one was hurt.

I wonder if this was truly an accident or not, just heard a steel plant in PA just blew up. I'm not a conspiracy theorist but in this day ya gotta wonder.
BROWN LABS MATTER !!
User avatar
COSteve
Advanced Levergunner
Posts: 4098
Joined: Sun Jul 12, 2009 4:03 pm
Location: A little valley up in the Rockies

Powder Valley Fire

Post by COSteve »

Dupe
Last edited by COSteve on Wed Aug 13, 2025 12:21 pm, edited 1 time in total.
Steve
18 Years into My New Career; 'Gentleman at Leisure'
Travel is Our Passion: 83 Countries and All 50 States Visited
No Matter Where You Go, There You Are
User avatar
Old No7
Advanced Levergunner
Posts: 3745
Joined: Tue Dec 18, 2007 9:06 pm
Location: Southern Maine

Re: Powder Valley fire

Post by Old No7 »

This link to a BP website has some images of the damage...

Old No7

Click HERE for link to images
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
User avatar
Ysabel Kid
Moderator
Posts: 28704
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: Powder Valley fire

Post by Ysabel Kid »

Crazy Horse wrote: Mon Aug 11, 2025 9:43 am I am glad nobody was hurt
+1 :shock:
Image
User avatar
jeepnik
Advanced Levergunner
Posts: 7354
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: Powder Valley fire

Post by jeepnik »

Well, on the good side, although the building and inventory are a total loss, the building is a steel building and those go up pretty fast. If their manufacturing area wasn't impacted they can get back to producing powders. Temporary storage options are available.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
User avatar
AmBraCol
Webservant
Posts: 3806
Joined: Fri Mar 30, 2007 8:12 am
Location: The Center of God's Grace
Contact:

Re: Powder Valley fire - Update

Post by AmBraCol »

To our Powder Valley family,

Thank you for the outpouring of love, support, and prayers. It has completely filled our hearts. We truly are part of the very best community in the world, and we love our Powder Valley family more than we can say. It’s been an emotional time, but receiving your messages of prayers, strength, and hope for the future have given us the courage we needed to keep moving forward.

For anyone who might have missed it, a fire tore through our main warehouse and offices in the middle of the night this past weekend, destroying almost everything. Thankfully, our Powder Valley family is safe, as are the first responders — and for that we’re deeply grateful. There’s a long road ahead, so please keep the prayers coming; we need all the support we can get. With all of you by our side, we know we’ll come back even better than before.

As you’d expect, we’re already forging ahead. Our team has set up mobile workstations so we can continue supporting customers while we rebuild, and we’re busy finding new temporary warehouse space while we work on our rebuild of home base. Below, you’ll find a few new photos of what happened and where we’re at now. We’ve also linked to a local news story about the fire with an interview from myself and Noel sharing what happened and where we go from here -- click here for the interview.

As I said in the interview, “We’re going to get up and we’re going to keep swinging. We’re going to keep swinging.”

What’s Next

We’ll share clear updates as we hit milestones.
We’ll send restock alerts the moment key items return.
Because so many of you have asked, we’ve included ways to support the business below — but only if it’s right for you. Your prayers are all we need.


Thanks to one off-site warehouse, we have a limited number of products available to ship now, and every order keeps momentum going while we rebuild. We also have digital gift cards, which can be used for what’s in-stock now or you can save them to use once our full inventory is back up.


With heartfelt thanks,

— Bryan, Noel, and the Powder Valley Team
Paul - in Pereira


"He is the best friend of American liberty who is most sincere and active in promoting true and undefiled religion." -- John Witherspoon

http://www.paulmoreland.com
http://www.pistolpackingpreachers.us
http://www.precisionandina.com
User avatar
marlinman93
Advanced Levergunner
Posts: 6967
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Powder Valley fire

Post by marlinman93 »

jeepnik wrote: Wed Aug 13, 2025 9:25 pm Well, on the good side, although the building and inventory are a total loss, the building is a steel building and those go up pretty fast. If their manufacturing area wasn't impacted they can get back to producing powders. Temporary storage options are available.
Powder Valley didn't produce any gunpowder. They are simply a marketer of various powders.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
User avatar
jeepnik
Advanced Levergunner
Posts: 7354
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: Powder Valley fire

Post by jeepnik »

marlinman93 wrote: Fri Aug 15, 2025 10:49 am
jeepnik wrote: Wed Aug 13, 2025 9:25 pm Well, on the good side, although the building and inventory are a total loss, the building is a steel building and those go up pretty fast. If their manufacturing area wasn't impacted they can get back to producing powders. Temporary storage options are available.
Powder Valley didn't produce any gunpowder. They are simply a marketer of various powders.
Well then, once the buildings get rebuilt they are at the mercy of the supply chain.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
User avatar
marlinman93
Advanced Levergunner
Posts: 6967
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Powder Valley fire

Post by marlinman93 »

jeepnik wrote: Fri Aug 15, 2025 3:44 pm
marlinman93 wrote: Fri Aug 15, 2025 10:49 am
jeepnik wrote: Wed Aug 13, 2025 9:25 pm Well, on the good side, although the building and inventory are a total loss, the building is a steel building and those go up pretty fast. If their manufacturing area wasn't impacted they can get back to producing powders. Temporary storage options are available.
Powder Valley didn't produce any gunpowder. They are simply a marketer of various powders.
Well then, once the buildings get rebuilt they are at the mercy of the supply chain.
Yep. Even those who sell to us have the same problems of supply that we have.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
Post Reply