Tycer,

Thanks. Makes perfect sense now. LoL

Tycer, Looked up and down and I don't see a hole in the guide rod. Looking at pictures of the guide rod online I'm not sure if this particular style has hole in the middle of the rod. I've uploaded a couple pics I found online of this style of guide rod and it looks solid all the way through except ...

Tycer, I was able to get the spring compressed pretty easily but the hammer has no rotation forward, at all. I believe it is locked on the sear. Unless you have any suggestions on how to possibly release the sear so the hammer can rotate forward then I'll probably have to go to plan B and pop the ha...

Tycer,

Thanks again! I’ll give it a go tomorrow morning and see if I can get the spring depressed enough to rotate the hammer back into position. If not, I’ll move to removing the hammer sleeve.

Thank you for the response. It’s good to hear I haven’t broken anything. Is the roll pin mentioned the one in the middle of the tang under the mainspring? I imagine the mainspring is currently under high tension. Will popping the pin release that tension dangerously and possibly need captured or sec...

Hello, New to the forum and new to leverguns. I recently purchased a Winchester 94 XTR as my first levergun. It was bought used so I decided to break it down and give it a good cleaning first. During the process of taking it apart the trigger assembly became hopelessly locked up. The hammer, mainspr...