Recoil spring for Unertl scope

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
win40-82
Levergunner 1.0
Posts: 99
Joined: Mon Sep 10, 2007 10:14 pm

Recoil spring for Unertl scope

Post by win40-82 »

I'm looking for a recoil spring for 10 power Unertl scope and the spring stop. A reproduction would be fine, any leads would be helpful. Thanks.
there is no such thing as a miss if you still have ammo
User avatar
marlinman93
Advanced Levergunner
Posts: 4511
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Recoil spring for Unertl scope

Post by marlinman93 »

Have to check and see if I have any left? It's the first thing I remove off a gun or scope when I buy them. Tough on crosshairs from all the banging back and forth during recoil/return. So I prefer to pull my scope back after each shot.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
win40-82
Levergunner 1.0
Posts: 99
Joined: Mon Sep 10, 2007 10:14 pm

Re: Recoil spring for Unertl scope

Post by win40-82 »

that would be greatly appreciated. Jim
there is no such thing as a miss if you still have ammo
jdad
Advanced Levergunner
Posts: 3320
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: Recoil spring for Unertl scope

Post by jdad »

marlinman93 wrote:
Tue May 19, 2020 4:02 pm
Have to check and see if I have any left? It's the first thing I remove off a gun or scope when I buy them. Tough on crosshairs from all the banging back and forth during recoil/return. So I prefer to pull my scope back after each shot.
I found this out the hard way. :oops:
I know a whole lot about very little and nothing about a whole lot.
win40-82
Levergunner 1.0
Posts: 99
Joined: Mon Sep 10, 2007 10:14 pm

Re: Recoil spring for Unertl scope

Post by win40-82 »

Found one. All is good now.
there is no such thing as a miss if you still have ammo
Post Reply