My first finger joint box. pictures added.

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Message
Author
User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

My first finger joint box. pictures added.

#1 Post by Pitchy » Sun Nov 10, 2019 2:20 pm

Made a finger joint box today for the first time, used a regular table saw blade but have a Dado blade on order.
It`s kind of a pain in the butt with all the flip here and turn there but we got er done.
Plan on making a couple pistol boxes.

Image

Image
Last edited by Pitchy on Tue Nov 12, 2019 6:49 pm, edited 1 time in total.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box.

#2 Post by GunnyMack » Sun Nov 10, 2019 3:16 pm

Pitchy ya done good! Yes sir finger joints are a pain in the butt but they sure look nice!

I'm thinking about doing an oak & leather trunk case.

Next you can try dovetails!
D62FF30E-75CD-463F-8DE8-0532AE849317-600x800.JPG
You do not have the required permissions to view the files attached to this post.
There is only one Earth. Do it a favor? GET OFF.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#3 Post by Pitchy » Sun Nov 10, 2019 3:23 pm

Thanks Gunny, i didn`t do it quite right and the edges didn`t come out flush so will try again tomorrow.
Here`s a good vid.

https://www.youtube.com/watch?v=NutwD7B6tmE

Dove tails, i don`t think so, nice job on yours. 8)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box.

#4 Post by GunnyMack » Sun Nov 10, 2019 3:42 pm

The trick to finger joints is a LOT of scrap to practice setting up the jig. I have done them with a homemade jig for the table saw but now I have a store bought jig and use the router table. It's still a lot to get everything just right!!
Dovetails by hand -NO WAY!! I use a router and a jig. They can be a real pain to get right also.
There is only one Earth. Do it a favor? GET OFF.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#5 Post by Pitchy » Sun Nov 10, 2019 3:45 pm

Yepper, i think i have it figured now and will make another tomorrow about three inch high .
The Dado i ordered is a wobble type because it was cheap and will try that when it gets here.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box.

#6 Post by GunnyMack » Sun Nov 10, 2019 5:18 pm

Stack dado work, great for having on a jobsite not to mention they are very adjustable. I have a stack dado in the shop.
There is only one Earth. Do it a favor? GET OFF.

User avatar
OldWin
Advanced Levergunner
Posts: 3224
Joined: Fri Oct 09, 2009 2:38 pm
Location: Maine

Re: My first finger joint box.

#7 Post by OldWin » Mon Nov 11, 2019 7:45 am

Very nice! I've never done finger joints. Don't think I will try. :D
"Oh Bother!" said Pooh, as he chambered another round.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#8 Post by Pitchy » Mon Nov 11, 2019 7:53 am

Thanks Jay, mot that bad once ya figure it out and get the jig set up.
I like it because i like the look , they look old fashion. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
OldWin
Advanced Levergunner
Posts: 3224
Joined: Fri Oct 09, 2009 2:38 pm
Location: Maine

Re: My first finger joint box.

#9 Post by OldWin » Mon Nov 11, 2019 7:58 am

I love the look.......but probably not if I did it haha.
"Oh Bother!" said Pooh, as he chambered another round.

User avatar
marlinman93
Advanced Levergunner
Posts: 4134
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: My first finger joint box.

#10 Post by marlinman93 » Mon Nov 11, 2019 10:32 am

Finger joint or dovetail joint boxes are some of the prettiest boxes made! I just don't have the talent for woodworking myself, but I sure like what you've done there Pitchy. Give me some steel, a welder, and a grinder and I can stick things together, but not wood.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#11 Post by Pitchy » Mon Nov 11, 2019 11:01 am

marlinman93 wrote:
Mon Nov 11, 2019 10:32 am
Finger joint or dovetail joint boxes are some of the prettiest boxes made! I just don't have the talent for woodworking myself, but I sure like what you've done there Pitchy. Give me some steel, a welder, and a grinder and I can stick things together, but not wood.
Same with me but after i started making things from wood it kinda grew on me.
Thanks, i just glued two more together one will be for the 1911, will post pics when done. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Grizz
Advanced Levergunner
Posts: 7023
Joined: Fri Aug 31, 2007 7:15 pm

Re: My first finger joint box.

#12 Post by Grizz » Mon Nov 11, 2019 11:13 am

I love that Pitchy ! Good Job.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#13 Post by Pitchy » Mon Nov 11, 2019 11:16 am

Thanks Grizz. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#14 Post by Pitchy » Mon Nov 11, 2019 2:46 pm

I`m no pro for sure but take a look at my 1911 box.

Image

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box.

#15 Post by GunnyMack » Mon Nov 11, 2019 3:35 pm

Now it needs a red velvet lining!!
There is only one Earth. Do it a favor? GET OFF.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#16 Post by Pitchy » Mon Nov 11, 2019 3:38 pm

There is thin leather in the bottom. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

M. M. Wright
Advanced Levergunner
Posts: 3663
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: My first finger joint box.

#17 Post by M. M. Wright » Mon Nov 11, 2019 3:48 pm

Outstanding Lenn. I really like boxes like that. I've long wanted to make one for my 62 police model. Very elegant little pistol but needs all that "stuff" to load it so a box with everything in it would be nice. Maybe I'll finally get around to it after the shop remodel.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#18 Post by Pitchy » Mon Nov 11, 2019 3:58 pm

Thanks Ron, i probably won`t use it much just something to make. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Grizz
Advanced Levergunner
Posts: 7023
Joined: Fri Aug 31, 2007 7:15 pm

Re: My first finger joint box.

#19 Post by Grizz » Mon Nov 11, 2019 8:25 pm

Pitchy wrote:
Sun Nov 10, 2019 3:23 pm
Thanks Gunny, i didn`t do it quite right and the edges didn`t come out flush so will try again tomorrow.
Here`s a good vid.

https://www.youtube.com/watch?v=NutwD7B6tmE

Dove tails, i don`t think so, nice job on yours. 8)
you can get them flush by making them a little long and sanding flat. also, it looks good to round the corners sometimes.

User avatar
Ysabel Kid
Moderator
Posts: 24856
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: My first finger joint box.

#20 Post by Ysabel Kid » Mon Nov 11, 2019 9:29 pm

Sweet! Great work Pitchy!!!
Image

Bill in Oregon
Advanced Levergunner
Posts: 5132
Joined: Sun Jun 29, 2008 10:05 am
Location: Alamogordo, NM

Re: My first finger joint box.

#21 Post by Bill in Oregon » Mon Nov 11, 2019 10:04 pm

Love it Lenn! Your 1911 must be proud! 8)

User avatar
Sixgun Sr
Levergunner 3.0
Posts: 728
Joined: Thu Mar 20, 2008 10:00 pm
Location: S.E. Pa. Where I Always Win And You Lose. Ha! Ha!

Re: My first finger joint box.

#22 Post by Sixgun Sr » Tue Nov 12, 2019 12:18 am

Pitchy..your a self taught craftsman with a lot of patience.....well done.......I'd just use a few dry wall screws and call it a day.

The only joints I've ever made was with Zig-Zag papers. The trick to them was to lick em and twist the ends.---6
Merwin & Hulbert 44-40
4th Model Frontier DA

Image

Nath
Advanced Levergunner
Posts: 7776
Joined: Sat Sep 08, 2007 1:41 pm
Location: England

Re: My first finger joint box.

#23 Post by Nath » Tue Nov 12, 2019 1:00 am

Sixgun Sr wrote:
Tue Nov 12, 2019 12:18 am
Pitchy..your a self taught craftsman with a lot of patience.....well done.......I'd just use a few dry wall screws and call it a day.

The only joints I've ever made was with Zig-Zag papers. The trick to them was to lick em and twist the ends.---6
:lol:

Len, your skills amaze me, it's a joy knowing you sir 8)

N.
Psalm ch8.

Because I wish I could!

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#24 Post by Pitchy » Tue Nov 12, 2019 7:02 am

The only joints I've ever made was with Zig-Zag papers. The trick to them was to lick em and twist the ends.---6
:lol: :lol: :lol: :lol:

Thanks fellers Grizz what i was talking about is the bottom and top if ya mess up the fingers don`t come out just right and ya can end up with a thin finger over the top or bottom.
The last one worked out right, Dado blade should be here today so will try that out.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#25 Post by Pitchy » Tue Nov 12, 2019 7:35 am

Not finger joint made it a week ago, it`s a really good design for a napkin holder.
Used to have a metal one and the napkins stood on edge that didn`t work very well, the roller keeps them down so one rolls out perfect.

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box.

#26 Post by GunnyMack » Tue Nov 12, 2019 8:00 am

Now that is a clever design that I might just borrow!! :D
There is only one Earth. Do it a favor? GET OFF.

wm
Senior Levergunner
Posts: 1179
Joined: Tue Sep 11, 2007 8:03 pm

Re: My first finger joint box.

#27 Post by wm » Tue Nov 12, 2019 10:44 am

Very nice …… reminiscent of a box I inherited from my wife's grandparents estate.

Wm

User avatar
Sixgun Sr
Levergunner 3.0
Posts: 728
Joined: Thu Mar 20, 2008 10:00 pm
Location: S.E. Pa. Where I Always Win And You Lose. Ha! Ha!

Re: My first finger joint box.

#28 Post by Sixgun Sr » Tue Nov 12, 2019 11:01 am

I like the napkin holder..........especially the burnt finish........it's a bit too classy for our use though........around here we'd just reach in and grab a handful and set em next to the holder. Yea....rednecks in Pennsylvania too. Up where Jay lives they never even heard of napkins...they still use the Sears catalog.----6
Merwin & Hulbert 44-40
4th Model Frontier DA

Image

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box.

#29 Post by Pitchy » Tue Nov 12, 2019 6:34 pm

Ok pards we made this box today using the new Dado blade, turned out great.

Image

Image

Image

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

octagon
Senior Levergunner
Posts: 1436
Joined: Mon Dec 17, 2007 4:56 pm
Location: TEXAS

Re: My first finger joint box. pictures added.

#30 Post by octagon » Tue Nov 12, 2019 9:30 pm

Like the hardware :D . Pitchy I see a TNT detonator with plunger in your future

User avatar
Grizz
Advanced Levergunner
Posts: 7023
Joined: Fri Aug 31, 2007 7:15 pm

Re: My first finger joint box. pictures added.

#31 Post by Grizz » Wed Nov 13, 2019 8:34 am

that's outstanding

User avatar
marlinman93
Advanced Levergunner
Posts: 4134
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: My first finger joint box. pictures added.

#32 Post by marlinman93 » Wed Nov 13, 2019 12:11 pm

Since my woodworking skills and tools are low, I usually try to find boxes that are old and made by somebody with skills. I did once build a box for my 1893 Marlin 3 barrel takedown set, and surprisingly it came out pretty good. At least good enough that people thought it was made by Marlin in the old days.
I'm love fitted cases for old guns so when I find old cases I like to build out the interiors to fit various guns I own. It doesn't take the kind of skill you possess in doing these nice jointed cases, as whatever dividers I build get covered with felt so the workmanship is hidden under that.
Did this one for my #4 Remington Rolling Block.

Image

And this one for a Ballard.

Image

I'd build a bunch if I had your woodworking skills!
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/

User avatar
Sixgun Sr
Levergunner 3.0
Posts: 728
Joined: Thu Mar 20, 2008 10:00 pm
Location: S.E. Pa. Where I Always Win And You Lose. Ha! Ha!

Re: My first finger joint box. pictures added.

#33 Post by Sixgun Sr » Wed Nov 13, 2019 12:28 pm

Marlinman...it don't get much more classier than your single shots.....couldn't imagine having to part with them. I hope I die before .....if for some strange reason I become broke.......of having to part with a few of my S.A.Colts & Winchesters.---6
Merwin & Hulbert 44-40
4th Model Frontier DA

Image

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#34 Post by Pitchy » Wed Nov 13, 2019 1:16 pm

Very nice Marlinman.
We`re putting together a box for the 94 win as we speak, going to put that foam in it from one of those factor plastic rifle boxes.
Will post later.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#35 Post by Pitchy » Wed Nov 13, 2019 5:25 pm

Got er done.

Image

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

Mossyoak1957
Levergunner 2.0
Posts: 449
Joined: Mon Oct 04, 2010 7:00 pm
Location: PA

Re: My first finger joint box. pictures added.

#36 Post by Mossyoak1957 » Wed Nov 13, 2019 6:07 pm

AWESOME!

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#37 Post by Pitchy » Wed Nov 13, 2019 7:07 pm

Thank you Sir, appreciated. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

Bill in Oregon
Advanced Levergunner
Posts: 5132
Joined: Sun Jun 29, 2008 10:05 am
Location: Alamogordo, NM

Re: My first finger joint box. pictures added.

#38 Post by Bill in Oregon » Wed Nov 13, 2019 7:08 pm

Holy cats, Lenn you are on a tear! I have never dared attempt any of these joints.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#39 Post by Pitchy » Wed Nov 13, 2019 7:12 pm

Thanks buddy, it can be a challenge, we screwed it up a couple of time today :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box. pictures added.

#40 Post by GunnyMack » Wed Nov 13, 2019 7:52 pm

I've been making these, silverware dividers. Been getting lots of interest in them.
20191030_142717-600x800.jpg
This is the whole system, drawer liner with individual dividers that are removable.
20191101_132748-600x800.jpg
here you can see the box joints cut on the router table.
20191106_132408-600x800.jpg
plywood bottom of drawer liner
You do not have the required permissions to view the files attached to this post.
There is only one Earth. Do it a favor? GET OFF.

User avatar
Grizz
Advanced Levergunner
Posts: 7023
Joined: Fri Aug 31, 2007 7:15 pm

Re: My first finger joint box. pictures added.

#41 Post by Grizz » Wed Nov 13, 2019 9:02 pm

that's really fine. how do you finish, or what finish do you use?

User avatar
GunnyMack
Advanced Levergunner
Posts: 3857
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: My first finger joint box. pictures added.

#42 Post by GunnyMack » Wed Nov 13, 2019 9:07 pm

Either polyurethane or lacquer. I like poly on open grain wood, lacquer on maple works well.
There is only one Earth. Do it a favor? GET OFF.

User avatar
OldWin
Advanced Levergunner
Posts: 3224
Joined: Fri Oct 09, 2009 2:38 pm
Location: Maine

Re: My first finger joint box. pictures added.

#43 Post by OldWin » Wed Nov 13, 2019 11:52 pm

Wow! Great job on this stuff, Lenn. Love the 1911 and 94 boxes. The napkin holder is a great idea.
And never you mind what Six said. We don't use the Sears catalog for napkins. We keep it beside the hole in the outhouse! :D
"Oh Bother!" said Pooh, as he chambered another round.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#44 Post by Pitchy » Thu Nov 14, 2019 7:02 am

Thanks everyone, nice work Gunny they look nice. :)
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

M. M. Wright
Advanced Levergunner
Posts: 3663
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: My first finger joint box.

#45 Post by M. M. Wright » Thu Nov 14, 2019 10:37 am

Pitchy wrote:
Tue Nov 12, 2019 6:34 pm
Ok pards we made this box today using the new Dado blade, turned out great.

Image

Image

Image

Image

Image
Wow pard, that's a gorgeous.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS

User avatar
marlinman93
Advanced Levergunner
Posts: 4134
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: My first finger joint box. pictures added.

#46 Post by marlinman93 » Thu Nov 14, 2019 11:21 am

Love that rifle case Pitchy! Only thing I'd change is making it shallow so the gun doesn't have room to shift, and of course making dividers to surround the gun and keep it from moving.
But your workmanship is excellent, and the case looks like it is made in the old style when guys did high quality gun cases from wood! Nice!
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#47 Post by Pitchy » Thu Nov 14, 2019 11:25 am

Thanks Ron, Marlinman it does sandwich between the top and bottom foam pretty tight so i don`t think it will move about.
Thanks again pards.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#48 Post by Pitchy » Thu Nov 14, 2019 3:43 pm

Today we made a folding table, the legs and bottom board are from a garage sale table.

Image

Image

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
Pitchy
Posting leader...
Posts: 10893
Joined: Tue Mar 01, 2011 9:15 am
Location: Minnesooooota

Re: My first finger joint box. pictures added.

#49 Post by Pitchy » Thu Nov 14, 2019 5:09 pm

For Marlinman.

Image
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
Friends are just people that will turn on ya some day, Jesus won`t.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.

User avatar
OldWin
Advanced Levergunner
Posts: 3224
Joined: Fri Oct 09, 2009 2:38 pm
Location: Maine

Re: My first finger joint box. pictures added.

#50 Post by OldWin » Fri Nov 15, 2019 8:30 am

Very nice, Lenn! Love the little table. You do excellent work.
"Oh Bother!" said Pooh, as he chambered another round.

Post Reply

Who is online

Users browsing this forum: vancelw and 1 guest