Dremel tool?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Message
Author
User avatar
Old Savage
Posting leader...
Posts: 12717
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Dremel tool?

#1 Post by Old Savage » Tue May 14, 2019 9:06 pm

Which would you fellows recommend?
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

User avatar
AJMD429
Posting leader...
Posts: 24867
Joined: Sun Sep 09, 2007 10:03 am
Location: Hoosierland
Contact:

Re: Dremel tool?

#2 Post by AJMD429 » Tue May 14, 2019 9:33 pm

I've had two - one was whatever the basic one was they sold 25 years ago, and then I upgraded to another about ten years ago and handed down the older one to one of my kids, and both Dremels do well with no problems.

I definitely want variable speed, but I suppose they all have that.

I like having the accessory generic 'chuck' to use tiny drill bits with.

Both have the 'spindle-lock' in a position that is sensible mechanically, but I tend to bump it with my thumb when holding it for 'close' work.

So....I know that's not much help since I don't have the model numbers handy, but the bottom line is I bought the near-bottom-of-the-line models each time and was not displeased.

P.S. I think mine is like the model 4000 of the current line-up.

As far as 'bits' the DIAMOND chain-saw-sharpening bits were a great and practical deal.
Last edited by AJMD429 on Tue May 14, 2019 9:47 pm, edited 1 time in total.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.


Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "

User avatar
harry
Senior Levergunner
Posts: 1047
Joined: Mon Jul 28, 2008 8:33 pm
Location: North East Montana

Re: Dremel tool?

#3 Post by harry » Tue May 14, 2019 9:37 pm

I have a battery powered Dremel tool but my most used is a Dumore, I’ve had the Dumore for 35+ years and only used one set of brushes, you can grind or polish for hours and it won’t over heat. https://www.dumoretools.com/hand-grinders/series-10.
All responses have been cleared by the law firm of "Lawyers Inc."

User avatar
Sixgun
Posting leader...
Posts: 11965
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa....Where Trump Is Supported And No One Takes The "High Moral Road".

Re: Dremel tool?

#4 Post by Sixgun » Tue May 14, 2019 10:06 pm

Battery powered dremels are as powerful as Steven Hawkings neck muscles...at least mine was. I've done burned up 3 electric Dremel branded ones in the last 30 years but I use em hard........if you want power get a chain saw sharpener which is nothing more than a large Dremel tool...uses the same bits..........I have a three foot flexible cord on mine.......

I must have 300 bits of all kinds of shyt for the Dremel......polishers, saws, grinders, drills,,,,,shapers.....and many times I'll just chuck one in the drill press, adjust the belts and pulleys and let em rip at 3500 rpms.
SSingle Action Colts. Poof! Poof!

Image

jkbrea
Levergunner 3.0
Posts: 926
Joined: Tue Dec 18, 2007 6:37 pm
Location: Jackson, Wyoming

Re: Dremel tool?

#5 Post by jkbrea » Tue May 14, 2019 11:57 pm

Sixgun wrote:
Tue May 14, 2019 10:06 pm
Battery powered dremels are as powerful as Steven Hawkings neck muscles...
:lol: :lol: :lol: :lol: :lol:

User avatar
FWiedner
Advanced Levergunner
Posts: 8380
Joined: Sat Sep 08, 2007 9:50 pm
Location: North Texas

Re: Dremel tool?

#6 Post by FWiedner » Wed May 15, 2019 4:18 am

I'v got a couple of Dremels that I use when I need portability or to work away from my bench, but I bought a Foredom tool with a foot-pedal for my work bench.

:)
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.

wm
Levergunner 3.0
Posts: 991
Joined: Tue Sep 11, 2007 8:03 pm

Re: Dremel tool?

#7 Post by wm » Wed May 15, 2019 6:55 am

I have a 20+ year old Dremel tool that has been there and done that. No complaints. I inherited one that I think belonged to my wife's grandfather and then her father. Its a Dremel and it looks like it was made in the 50s or 60s. Still works. I also inherited a Ryobi from my father. I rarely have used it. It is also probably 25 years old but looks brand new because it basically has been gathering dust but it seems to be just fine.

Don't buy the $10 one Harbor Freight advertisers. It is fine for some light polishing but as cutting tool it lacks power and frankly its rechargeable battery has not got long legs. I use it strictly for cleaning up primer pockets.

I'm not sure that helps but that's been my experience.

Wm

User avatar
Tycer
Advanced Levergunner
Posts: 6584
Joined: Sun Sep 02, 2007 10:17 am
Location: Asheville, NC

Re: Dremel tool?

#8 Post by Tycer » Wed May 15, 2019 8:08 am

I despise my 200 series corded two speed.
I have a 20 year old $6 Target version that won’t die even though the front bushing is worn.
I have an old model with no label attached to a flexible I use on the bench.

I’d buy a 3000 series with a small kit and then add what I need as I need it. I would buy two tubes of thin cutoff wheels and a few reinforced wheels, a dozen mini buffing wheels, and a selection of sanding tubes.
.
And as things fell apart, nobody paid much attention. -David Byrne
----------------------------------------------------------------
http://www.saf.org - http://www.peakprosperity.com - http://www.guntalk.com

User avatar
Pete44ru
Posting leader...
Posts: 11052
Joined: Sun Sep 02, 2007 7:26 am
Location: Southern New England

Re: Dremel tool?

#9 Post by Pete44ru » Wed May 15, 2019 10:58 am

.

I would heartily recommend a real Dremel, and not a knock-off.

.
IF IN THESE TYMES OF JEOPARDY,
MORTAL PERIL INVADES THY THOUGHT,
TAKE UP THIS TRVSTY PIECE,
TRVST IN THY GOD, AND FEAR THEE NAUGHT.

(The avatar is me, in 1948 ! )

.

User avatar
Griff
Posting leader...
Posts: 18400
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Dremel tool?

#10 Post by Griff » Wed May 15, 2019 11:57 am

Pete44ru wrote:
Wed May 15, 2019 10:58 am
I would heartily recommend a real Dremel, and not a knock-off.
+1. I have 4 Dremels, 2 electric & 2 battery powered. The 2 battery powered are different sizes, and get used depending on what needs doing. Happy with 'em all.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!

User avatar
Old Savage
Posting leader...
Posts: 12717
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Dremel tool?

#11 Post by Old Savage » Wed May 15, 2019 12:46 pm

Thanks fellows, I appreciate the input. Going to look today at Lowe's etc.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

piller
Advanced Levergunner
Posts: 8408
Joined: Sat Sep 29, 2007 9:49 pm
Location: South of Dallas

Re: Dremel tool?

#12 Post by piller » Thu May 16, 2019 2:28 pm

Black & Decker RTX tool. Mine is 20 years old and more powerful than any Dremel I have seen. About 2/3 of the way to a RotoZip. Dremels are too weak to grind glass with a tungsten carbide bit.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost

pshort
Levergunner 3.0
Posts: 536
Joined: Fri Mar 30, 2007 10:43 am
Location: Central Minnesota

Re: Dremel tool?

#13 Post by pshort » Fri May 17, 2019 1:25 pm

Hi Fred,
I bought a "Dremel" model 380 w/ball bearings about 40 yrs ago...
Still works fine.... The bushing models are little cheaper, but the
bushings wear out...

Paul
"Pain plants the flag of reality in the
fortress of a rebel soul"

User avatar
cas
Senior Levergunner
Posts: 1341
Joined: Tue Apr 10, 2007 1:41 pm
Location: Under the giant W

Re: Dremel tool?

#14 Post by cas » Fri May 17, 2019 6:42 pm

After repeated let downs and early deaths (5-6?), I gave up on Dremel brand tools. Bought a Black and Decker branded one (of all things) and it's been great for many years. When my father's Dremel died as well, it too was replaced with the same B&D.
Slow is just slow.

claybob86
Senior Levergunner
Posts: 1755
Joined: Mon Apr 02, 2007 10:41 pm

Re: Dremel tool?

#15 Post by claybob86 » Fri May 17, 2019 7:19 pm

I have a Dremel Model 260, which I've had for close to 50 years. The internal rectifier that came on it failed, a new one failed after a while, so I put a heavy duty rectifier in the power cord. End of problems. Replaced the brushes a few years ago. Other than the rectifiers, I have no complaints.
Have you hugged your rifle today?

M. M. Wright
Advanced Levergunner
Posts: 3551
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: Dremel tool?

#16 Post by M. M. Wright » Fri May 17, 2019 11:48 pm

I've had 3 Dremel variable speed models that never worked to my satisfaction. I mostly use an air powered die grinder with Dremel tools. Couldn't get by without those thin cut-off discs.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS

User avatar
Grizz
Advanced Levergunner
Posts: 6882
Joined: Fri Aug 31, 2007 7:15 pm

Re: Dremel tool?

#17 Post by Grizz » Sat May 18, 2019 1:42 pm

So, any thoughts on a die grinder as a rotary tool? the corded have much more powerful motors and with 1/8" sleeves will drive dremel size bits as well as standard die grind bits. I don't have enough air to run a die grinder yet, am only interested in 110v.

I have a harbor freight rotary which hasn't self-destructed yet. I bought a dremel when I lived in bush alaska, long before internet, and it self-destructed before I got any appreciable use out of it. every time I pause in the aisle in front of the dremel display, that old time memory pops right up, daring me to be creatively stupid...... OTOH, I am that guy that manufacturers dump off their disposables to.... anyone have any real-time die grinder advice?

thanks and good day y'all

User avatar
marlinman93
Advanced Levergunner
Posts: 4021
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Dremel tool?

#18 Post by marlinman93 » Mon May 20, 2019 1:27 pm

I have the corded Dremel with flex shaft so I leave the Dremel hanging from the ceiling and use the flex shaft attachment all the time. Mine is variable speed which is a must for various jobs. I've also got the keyless chuck to make bit changes easy and quick.
Had it for too long to remember and still works like new.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/

JB
Senior Levergunner
Posts: 1339
Joined: Tue Dec 11, 2007 3:35 pm
Location: WV

Re: Dremel tool?

#19 Post by JB » Mon May 20, 2019 7:30 pm

I've owned a Craftsman version for about 20 years now. It's a six or seven speed (I can't remember), but it works great. I don't think the name matters as long as it's a quality unit.

g5m
Levergunner
Posts: 31
Joined: Wed Dec 26, 2007 11:25 pm

Re: Dremel tool?

#20 Post by g5m » Mon May 20, 2019 9:30 pm

I have a variable speed Dremel and also a variable speed Ryobi. The Ryobi is more powerful and shows that well but it has a fairly soft notch that holds the spindle for when you want to loosen the collet type chuck and I wouldn't recommend it anymore for that reason. The Dremel has worked well but I have overheated some of the smaller Dremels. Someday, maybe, a Dumore.

Post Reply

Who is online

Users browsing this forum: harry, milton, RJS and 4 guests