Recommendation For A Cheek Piece, Gun Site Scout

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: Hobie, AmBraCol

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Message
Author
User avatar
BlaineG
Posting leader...
Posts: 26324
Joined: Mon Dec 17, 2007 2:22 pm
Location: Spanaway, Washington

Recommendation For A Cheek Piece, Gun Site Scout

#1 Post by BlaineG » Fri May 11, 2018 7:38 pm

I just can't get a good off-hand sight pic. I need to raise the comb to get a solid cheek/comb weld. Getting tired of banging the heck out of my cheekbone when I raise my face up.
Are there any products that you could recommend. It doesn't have to be pretty, those composite stocks are ugly anyway. Just so they stay in place once I fit it to the stock.
“I was not born to be forced. I will breathe after my own fashion. Let us see who is the strongest.”
― Henry David Thoreau, On the Duty of Civil Disobedience

HawkCreek
Levergunner 2.0
Posts: 199
Joined: Sun Dec 11, 2016 6:21 pm

Re: Recommendation For A Cheek Piece, Gun Site Scout

#2 Post by HawkCreek » Fri May 11, 2018 7:57 pm

Hill People Gear Stock Cuff, you can put something under it for padding if you need plus it holds ammo.
http://hillpeoplegear.com/Products/Cate ... oductID/43

Or if you really want to go cheap cut strips out of an old closed cell foam sleeping pad and duck tape them on, add layers to raise as much as you need.

User avatar
BlaineG
Posting leader...
Posts: 26324
Joined: Mon Dec 17, 2007 2:22 pm
Location: Spanaway, Washington

Re: Recommendation For A Cheek Piece, Gun Site Scout

#3 Post by BlaineG » Fri May 11, 2018 10:50 pm

HawkCreek wrote:
Fri May 11, 2018 7:57 pm
Hill People Gear Stock Cuff, you can put something under it for padding if you need plus it holds ammo.
http://hillpeoplegear.com/Products/Cate ... oductID/43

Or if you really want to go cheap cut strips out of an old closed cell foam sleeping pad and duck tape them on, add layers to raise as much as you need.
I'll give it a good look. Thanks :)
“I was not born to be forced. I will breathe after my own fashion. Let us see who is the strongest.”
― Henry David Thoreau, On the Duty of Civil Disobedience

.45colt
Advanced Levergunner
Posts: 3011
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Recommendation For A Cheek Piece, Gun Site Scout

#4 Post by .45colt » Sat May 12, 2018 4:08 am


User avatar
GunnyMack
Advanced Levergunner
Posts: 2199
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Recommendation For A Cheek Piece, Gun Site Scout

#5 Post by GunnyMack » Sat May 12, 2018 5:07 am

Blaine you can also get yourself a can of bondo body filler. Build up the comb sand and paint. This is more permanent than a cuff type comb raising kit.

User avatar
BlaineG
Posting leader...
Posts: 26324
Joined: Mon Dec 17, 2007 2:22 pm
Location: Spanaway, Washington

Re: Recommendation For A Cheek Piece, Gun Site Scout

#6 Post by BlaineG » Sat May 12, 2018 2:18 pm

.45colt wrote:
Sat May 12, 2018 4:08 am
I may get this one myself....https://ads.midwayusa.com/product/45141 ... gKZlfD_BwE
I was looking at the one right before that one...No bullet loops.

https://www.midwayusa.com/product/10181 ... r-neoprene

I don't think I want to bondo anything. I'm not sure I'll have a long term relationship with this one. A most excellent rifle, but haveing "fit" problems.
“I was not born to be forced. I will breathe after my own fashion. Let us see who is the strongest.”
― Henry David Thoreau, On the Duty of Civil Disobedience

User avatar
GunnyMack
Advanced Levergunner
Posts: 2199
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Recommendation For A Cheek Piece, Gun Site Scout

#7 Post by GunnyMack » Sat May 12, 2018 3:39 pm

In that case forget a permanent build up. Suppose you could always see what Boydes has too.

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests