Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
jd45
Levergunner 3.0
Posts: 935
Joined: Mon Sep 10, 2007 7:29 pm

Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by jd45 »

Hello. I bought this rifle from the original owner a few weeks ago. It's been well cared for, but is an older, (20yrs) model EMF Hartford. It has the usual plastic mag follower. I've tried Numrich Gun Parts; RossiUSA; & Brownells, all to no avail. Now I did go straight to Winchester for one for my .45 Colt Rossi 1892 several years ago, tho I'm doubtful they'll have one for .357MAG caliber. Can anyone suggest a possible source I might check along with Winchester for this part? Thanx for the feedback, jd45
blackhawk44
Levergunner 2.0
Posts: 273
Joined: Fri Sep 07, 2007 4:06 pm
Location: San Antonio, Republic of Texas

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by blackhawk44 »

Go to either stevesguns.com or thesmithshop.com.
jkbrea
Senior Levergunner
Posts: 1167
Joined: Tue Dec 18, 2007 6:37 pm
Location: S. of Jackson, Wyoming

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by jkbrea »

+1 for Stevesgunz
http://stevesgunz.com/
Rusty
Advanced Levergunner
Posts: 9528
Joined: Mon Sep 03, 2007 6:37 pm
Location: Central Fla

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Rusty »

Steve is a member here.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9

It's easier to fool people than it is to convince them they have been fooled.
Les Staley
Levergunner 3.0
Posts: 995
Joined: Mon Feb 04, 2008 10:29 pm
Location: Idaho panhandle/Wyoming

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Les Staley »

I made one using a spent 40 S&W cartridge inside a 44 mag cartridge. A little solder and a propane torch. Good to go!
This is plagiarized from someone else, but I love it!

I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Pete44ru »

.

OR, you can make one with a hacksaw, a file & a power hand drill, from brass - like this (I used an old brass blackpowder measure).

Image Image Image

Image Image Image

Image Image Image
jd45
Levergunner 3.0
Posts: 935
Joined: Mon Sep 10, 2007 7:29 pm

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by jd45 »

Sorry guys, I should've mentioned that I've also contacted Steve, but haven't gotten a reply from him as yet. Pete, what you did in the pics is really impressive. I may try it. Thanx for all your help, guys. jd45
Les Staley
Levergunner 3.0
Posts: 995
Joined: Mon Feb 04, 2008 10:29 pm
Location: Idaho panhandle/Wyoming

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Les Staley »

Pete44ru, Great idea! That's what I like about this forum! It's like my dad used to say, it's dangerous to get a bunch of boys together, what one boy don't think of another one will.
This is plagiarized from someone else, but I love it!

I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
jd45
Levergunner 3.0
Posts: 935
Joined: Mon Sep 10, 2007 7:29 pm

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by jd45 »

Just got a call from Phil at the smithshop. He fixed me up right quick, and get this.....he didn't take my credit card number. He said he'd send me the part with an invoice & I was to send him back a check for it. What do you think of that???
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Chuck 100 yd »

Steve is good folks!
User avatar
Griff
Posting leader...
Posts: 20832
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Steel Magazine Follower For .357 MAG Rossi 1892 Rifle

Post by Griff »

jd45 wrote:Just got a call from Phil at the smithshop. He fixed me up right quick, and get this.....he didn't take my credit card number. He said he'd send me the part with an invoice & I was to send him back a check for it. What do you think of that???
Good guys... I ordered some wire springs for my 1860 & '73 and he quoted me a price, my check & springs passed somewhere in the mail!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Post Reply