Yesterday I scored two of these handmade boxes on eBay.
Got them for US $15.00 a box, normally they sell for US $20.00 a box.
I do intend to carefully cut them open and fill them with my hand loaded .38 WCF ammo.
I would like to coat them with something to add a layer of protection.
Would a couple coats of clear shellac or varnish work?
Any other ideas?
Reproduction Ammo. Boxes ??
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Reproduction Ammo. Boxes ??
You do not have the required permissions to view the files attached to this post.
-
- Senior Levergunner
- Posts: 1429
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
Re: Reproduction Ammo. Boxes ??
if you can peel apart box's to lay flat, maybe clear plastic laminate might work. You will have to slightly score folds with a ruler and a butter knife so it will bend back on the folds. a thin layer laminate will work best.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Re: Reproduction Ammo. Boxes ??
That indeed would be the best protection.rossim92 wrote:if you can peel apart box's to lay flat, maybe clear plastic laminate might work. You will have to slightly score folds with a ruler and a butter knife so it will bend back on the folds. a thin layer laminate will work best.
Unfortunately these are not like a shotgun shell box with a single seam that can be carefully separated then glued back together.
I need a protective coating that can either be sprayed on or applied streak free with a brush.
- Ysabel Kid
- Moderator
- Posts: 27903
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Reproduction Ammo. Boxes ??
Every time I see a post with antique ammunition boxes, or replicas, I get the urge to make a few more of these!
Re: Reproduction Ammo. Boxes ??
Just gotta love the old vintage ammo. boxes.
I can spend hours looking at pictures of the detailed graphics on old shotgun shell boxes.
Seems there was much more care and pride went into even ammo. boxes back in the day.
I can spend hours looking at pictures of the detailed graphics on old shotgun shell boxes.
Seems there was much more care and pride went into even ammo. boxes back in the day.
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: Reproduction Ammo. Boxes ??
Krylon clear finish ?
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Reproduction Ammo. Boxes ??
If the labels are plain paper, not plastic-coated, then polyurethane, varnish or shellac would work... if the paper is coated, I would stick to polyurethane.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Reproduction Ammo. Boxes ??
Lefty,
I agree, I think spray on is the way to go.
Think I'll hit the local craft store and see what they recommend.
Need something that's non yellowing and won't distort the print or damage the label's in anyway.
These boxes are made and shipped from across the big pond so I have some time till I have them in hand.
I agree, I think spray on is the way to go.
Think I'll hit the local craft store and see what they recommend.
Need something that's non yellowing and won't distort the print or damage the label's in anyway.
These boxes are made and shipped from across the big pond so I have some time till I have them in hand.
Re: Reproduction Ammo. Boxes ??
Thanks Griff, all good ideasGriff wrote:If the labels are plain paper, not plastic-coated, then polyurethane, varnish or shellac would work... if the paper is coated, I would stick to polyurethane.