Interesting concept on pointed bullets in tubular mags
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Interesting concept on pointed bullets in tubular mags
The October 2014 American Rifleman has an article on the French 1886/93 Lebel Rifle chambered for the 8x50Rmm. I didn't read the article in its entirety but a couple of pictures on pages 69/70 prompted me to read parts of it regarding the use of pointed bullets in the tubular mag as found on this rifle.
The 1886/93 has a tubular magazine which is loaded by retracting the bolt and inserting the cartridges on a slant under the chamber which is kind of interesting in itself. The early cartridges had a flat bullet and the base of the casings were flat. Now here's where it gets interesting: Later 8x50R rounds had spitzer type bullets and the base of the casings had an "O-ring crimp added to the base which held the bullet tip captive away from the primer" (the wording used in the article).
That really is an interesting idea and it must have worked but I still do not understand why the point of a bullet doesn't gravitate to the middle point (namely, to the center of the primer in front of it). Could someone please explain this? Thanks.
The 1886/93 has a tubular magazine which is loaded by retracting the bolt and inserting the cartridges on a slant under the chamber which is kind of interesting in itself. The early cartridges had a flat bullet and the base of the casings were flat. Now here's where it gets interesting: Later 8x50R rounds had spitzer type bullets and the base of the casings had an "O-ring crimp added to the base which held the bullet tip captive away from the primer" (the wording used in the article).
That really is an interesting idea and it must have worked but I still do not understand why the point of a bullet doesn't gravitate to the middle point (namely, to the center of the primer in front of it). Could someone please explain this? Thanks.
Re: Interesting concept on pointed bullets in tubular mags
If you lay two cartridges in a line on a flat surface you will see that the downward slope of the cartridge places the point of the bullet away from the primer.
W30wcf
W30wcf
aka John Kort
aka Jack Christian SASS 11993 "I can do all things through Christ who strengthens me." Philippians 4:13
aka w44wcf (black powder)
NRA Life member
.22 WCF, .30 WCF, .44 WCF Cartridge Historian
aka Jack Christian SASS 11993 "I can do all things through Christ who strengthens me." Philippians 4:13
aka w44wcf (black powder)
NRA Life member
.22 WCF, .30 WCF, .44 WCF Cartridge Historian
Re: Interesting concept on pointed bullets in tubular mags
Even more so when you have a rimmed cart. with a pronounced taper.
What in the wild world of sports is going on here
Re: Interesting concept on pointed bullets in tubular mags
Got it! Makes total sense when visualized as you both explained it.
- AJMD429
- Posting leader...
- Posts: 32245
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Interesting concept on pointed bullets in tubular mags
Still I have a hard time filing that under "mechanical concepts I'd gladly risk my life trusting..."
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Interesting concept on pointed bullets in tubular mags
Remington sold a lot of model 14's and 141's with the spiral magazine tube to keep the point of the bullet away from the primer of the next cartridge. I haven't read anything about rounds going off in the magazine tube with those guns. But I am not sure how much of the ammo for those guns were sold with spitzer bullets either.
-
- Advanced Levergunner
- Posts: 2569
- Joined: Sat Sep 15, 2007 12:51 pm
Re: Interesting concept on pointed bullets in tubular mags
That was a very informative article... Never knew the Lebel would hold 10 rounds...I thought the "crimp ring" a very clever solution for spitzer bullets in a tubular magazine...Must have worked fine because the Frenchies stuck with it for many years... You can bet if there were chain fires in the mag tube a lot would have been made of it and it would be the first thing we'd hear about the Lebel...
"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
WIL TERRY
Re: Interesting concept on pointed bullets in tubular mags
You don't drive an automobile or fly then?AJMD429 wrote:Still I have a hard time filing that under "mechanical concepts I'd gladly risk my life trusting..."
Pointy bullets in tubular magazines has been over hyped for years, more have died falling whilst out hunting than if someone loaded pointy bullets in there 30/30 levergun (and got it to cycle!).
Just my take
N.
Psalm ch8.
Because I wish I could!
Because I wish I could!
Re: Interesting concept on pointed bullets in tubular mags
I took another look at the pics of the cartridges for the Lebel in the article and noticed two things (in light of what a couple of you mentioned): how rapidly tapered they are and how stout they are at the base/case head meaning that the points of the bullets REALLY do not contact the primers on the rounds in front of them.
On a different note regarding tubular magazines, a couple of things got me to thinking: Wonder why Winchester never adopted the Remington Model 14 spiral tube idea on the 94? Maybe a patent issue?..... Also, were the 25, 30 and 32 Remington rounds ever offered with pointed bullets? The 35 Remington may still be available in 150 PSP by Remington to this day, but as far back as the 60's, I NEVER recall seeing the 30 or 32 Rem offered by any ammo manufacturers with pointed bullets.
On a different note regarding tubular magazines, a couple of things got me to thinking: Wonder why Winchester never adopted the Remington Model 14 spiral tube idea on the 94? Maybe a patent issue?..... Also, were the 25, 30 and 32 Remington rounds ever offered with pointed bullets? The 35 Remington may still be available in 150 PSP by Remington to this day, but as far back as the 60's, I NEVER recall seeing the 30 or 32 Rem offered by any ammo manufacturers with pointed bullets.
Re: Interesting concept on pointed bullets in tubular mags
m.wun wrote:Even more so when you have a rimmed cart. with a pronounced taper.
and the 8mm Lebel DEFINATELY has case taper!
Merle from PA
- AJMD429
- Posting leader...
- Posts: 32245
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Interesting concept on pointed bullets in tubular mags
Only with extreme trepidation...Nath wrote:You don't drive an automobile or fly then?AJMD429 wrote:Still I have a hard time filing that under "mechanical concepts I'd gladly risk my life trusting..."
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Interesting concept on pointed bullets in tubular mags
Better than extreme Trepannation.AJMD429 wrote:Only with extreme trepidation...Nath wrote:You don't drive an automobile or fly then?AJMD429 wrote:Still I have a hard time filing that under "mechanical concepts I'd gladly risk my life trusting..."
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
- earlmck
- Advanced Levergunner
- Posts: 3447
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: Interesting concept on pointed bullets in tubular mags
As implemented by Remington, the spiral magazine does not work with pointed bullets in anything smaller than 35 Remington. As the proud owner of several of these fine old pumps, one of the first things I did was to load up some nice pointy bullets in my 25 and 30 Remingtons. The spiral flutes are so effective at forcing the bullet to the side of the tube that the point of the bullet jams between the case ahead of it and the wall of the magazine, preventing you from loading more than one pointy cartridge in the magazine. If you hold your mouth just right you can load pointy 35 Remington cartridges, though they really want to jam also. That 35 Rem is just enough fatter cartridge you can get the job done if you work carefully.kaschi wrote: Wonder why Winchester never adopted the Remington Model 14 spiral tube idea on the 94? Maybe a patent issue?..... Also, were the 25, 30 and 32 Remington rounds ever offered with pointed bullets? The 35 Remington may still be available in 150 PSP by Remington to this day, but as far back as the 60's, I NEVER recall seeing the 30 or 32 Rem offered by any ammo manufacturers with pointed bullets.
Now the real question is why Winchester and Marlin didn't copy Remington's handy little step in the loading gate that holds the partially inserted round nicely in place while you take all the time you want getting the next round ready to insert. When I bring out my own "earlmck lever" rifle I am doing to include the "Remington Stepped loading gate". And maybe use their rimless cases also (the Remington Benchrest cases, that is).
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Levergunner 2.0
- Posts: 190
- Joined: Mon Dec 02, 2013 11:45 am
Re: Interesting concept on pointed bullets in tubular mags
I know I load 200 gr. .35 cal spitzer Hornaday bullets in my 35 Rem.model 141, and I have never had any problem with functioning or rounds going off when they are not supposed to.
-
- Advanced Levergunner
- Posts: 2569
- Joined: Sat Sep 15, 2007 12:51 pm
Re: Interesting concept on pointed bullets in tubular mags
Thanks Earl ...good info on spiral magazine
"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
WIL TERRY
Re: Interesting concept on pointed bullets in tubular mags
Thanks for the good info Earl. I've got Model 14s in all of the calibers but have never toyed with the idea of trying pointed bullets in them. After reading what you wrote, I'm glad I didn't.
One last thing I've frequently pondered while we're on this topic: I've never understood why Remington continues to load the 35 Remington with 150 grain PSP bullets. It seems there are probably more Marlin 336s in 35 Rem around (and in constant use) over the past several decades than there are Model 14s and 141s. With all the hype as to the dangers of using pointed bullets in tube mags, one would have thought they simply would have discontinued the practice if it were a real concern. But then again, maybe Remington doesn't care what Marlin owners do..... Maybe we'll never know.
One last thing I've frequently pondered while we're on this topic: I've never understood why Remington continues to load the 35 Remington with 150 grain PSP bullets. It seems there are probably more Marlin 336s in 35 Rem around (and in constant use) over the past several decades than there are Model 14s and 141s. With all the hype as to the dangers of using pointed bullets in tube mags, one would have thought they simply would have discontinued the practice if it were a real concern. But then again, maybe Remington doesn't care what Marlin owners do..... Maybe we'll never know.
Re: Interesting concept on pointed bullets in tubular mags
I'll hazard to guess that it's a non-issue. If the lawyers told Marlin to do it differently, they would.kaschi wrote:Thanks for the good info Earl. I've got Model 14s in all of the calibers but have never toyed with the idea of trying pointed bullets in them. After reading what you wrote, I'm glad I didn't.
One last thing I've frequently pondered while we're on this topic: I've never understood why Remington continues to load the 35 Remington with 150 grain PSP bullets. It seems there are probably more Marlin 336s in 35 Rem around (and in constant use) over the past several decades than there are Model 14s and 141s. With all the hype as to the dangers of using pointed bullets in tube mags, one would have thought they simply would have discontinued the practice if it were a real concern. But then again, maybe Remington doesn't care what Marlin owners do..... Maybe we'll never know.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
- Rimfire McNutjob
- Advanced Levergunner
- Posts: 3158
- Joined: Mon Sep 03, 2007 2:51 pm
- Location: Sanford, FL.
Re: Interesting concept on pointed bullets in tubular mags
As I recall, all of the mag tube detonations that have made it to the web over the last twenty years that I've seen have been RN bullets in large pistol calibers. Also, I seem to recall that a couple were questioning that large rifle primers in large pistol pockets may have contributed. Those seem like they would both result in a questionable geometry problem that could well lead to a tube detonation.
Anyone seen an example in a tapered / rimmed rifle cartridge of a blowup?
Anyone seen an example in a tapered / rimmed rifle cartridge of a blowup?
... I love poetry, long walks on the beach, and poking dead things with a stick.
- earlmck
- Advanced Levergunner
- Posts: 3447
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: Interesting concept on pointed bullets in tubular mags
No I haven't, Rimfire. And I tried and failed to get such an ignition a few years ago even going so far as to epoxy a firing pin into the nose of my "igniter cartridge". And even on that untapered 454 Casull cartridge I had to wrap a batch of tape around the neck area to level the cartridge out so the nose of my "igniter cartridge" would impact the primer in the case ahead of it.Rimfire McNutjob wrote:As I recall, all of the mag tube detonations that have made it to the web over the last twenty years that I've seen have been RN bullets in large pistol calibers. Also, I seem to recall that a couple were questioning that large rifle primers in large pistol pockets may have contributed. Those seem like they would both result in a questionable geometry problem that could well lead to a tube detonation.
Anyone seen an example in a tapered / rimmed rifle cartridge of a blowup?
One of our fellow levergunners, Muskeg13, had a nasty bad ignition in the magazine that caused him some real body damage. Flat nosed hard cast bullet in 44 mag was the culprit. At least that is what he was shooting. Looking at his pictures I did wonder if it wasn't the cartridge released by the cartridge stop, sliding into the "ready" position, that ignited.
So like they say, "Never say Never". But I would say "Virtually Never". And maybe "Totally Never" for tapered rimmed cartridges loaded with soft point spitzers.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
Re: Interesting concept on pointed bullets in tubular mags
She we say "detonation" in this context do they really detonate?
Does pressure rise at the same rate as in a snug chamber and barrel?
Apart from that, I think stout magazine springs go a long way in preventing any cartridges bouncing around in there. Maybe some have llightens said spring to aid loading but have heightened this risk!
N.
Does pressure rise at the same rate as in a snug chamber and barrel?
Apart from that, I think stout magazine springs go a long way in preventing any cartridges bouncing around in there. Maybe some have llightens said spring to aid loading but have heightened this risk!
N.
Psalm ch8.
Because I wish I could!
Because I wish I could!