winchester slide action info

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rossim92
Senior Levergunner
Posts: 1465
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

winchester slide action info

Post by rossim92 »

My friend has a winchester slide action .22 rifle. It is missing the internals far as the lifter, firing pin, tube rod. The slide cycles and hammer functions. looks like someone used it for the internal parts. still has the factory sights. serial number is 622334. any info, parts, opinions on this piece of history? Has some rifling left, just might a real good scrubbing. I have been wanting one for my next gun, He has a buddy who has one that is a shooter and will check to see if he will sell it.
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: winchester slide action info

Post by Pete44ru »

.

Winchester made both exposed hammer & hammerless .22 pumpguns; but since you mentioned a hammer, I would WAG you most likely have a Model 1890, a Model 1906, or a Model 62/62A - so you need to determine which model (maybe via a bbl rollmark ? ) B 4 googling for the parts.


.
rossim92
Senior Levergunner
Posts: 1465
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: winchester slide action info

Post by rossim92 »

Pete44ru wrote:.

Winchester made both exposed hammer & hammerless .22 pumpguns; but since you mentioned a hammer, I would WAG you most likely have a Model 1890, a Model 1906, or a Model 62/62A - so you need to determine which model (maybe via a bbl rollmark ? ) B 4 googling for the parts.


.
i could only make the winchester name out on the barrel. pretty heavy on the patina and it does have the exposed hammer. has some kind of stud on the rear of the action cover, not sure what that was for .
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
rossim92
Senior Levergunner
Posts: 1465
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: winchester slide action info

Post by rossim92 »

Oh i forgt! My knife came in yesterday pete , and it is a beauty will put up in my guncabinet next to my holsters and other guns. :D
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
jdad
Advanced Levergunner
Posts: 3442
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: winchester slide action info

Post by jdad »

My guess is that it's an 1890 since that serial number would put it in the 1919 range, for that model.


1. If that "stud" is on the side of the receiver it's the takedown screw.

2. If it has an octagon barrel it's an 1890. It's either a 1906 or 62 if it has the round barrel.

3. You should be able to read the caliber markings, on the left side of the barrel just in front of the receiver.

All 3 models had the same basic internals, but caliber makes a difference if it's a 22WRF.
I know a whole lot about very little and nothing about a whole lot.
rossim92
Senior Levergunner
Posts: 1465
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: winchester slide action info

Post by rossim92 »

jdad wrote:My guess is that it's an 1890 since that serial number would put it in the 1919 range, for that model.


1. If that "stud" is on the side of the receiver it's the takedown screw.

2. If it has an octagon barrel it's an 1890. It's either a 1906 or 62 if it has the round barrel.

3. You should be able to read the caliber markings, on the left side of the barrel just in front of the receiver.

All 3 models had the same basic internals, but caliber makes a difference if it's a 22WRF.
has the octagon barrel and and a lot of the stamping is worn off, can only make the name winchester out clearly
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
rossim92
Senior Levergunner
Posts: 1465
Joined: Sat Jan 01, 2011 2:42 am
Location: mechanicsville, md.

Re: winchester slide action info

Post by rossim92 »

any idea as to value as is?
Rossi 92 .357 lever , and a cz pcr 9mm
Henry .22 lever, Remington speedmaster 552 .22 lr
Marlin Glenfield .22 boltaction
gforce 12ga semi
Taylor's Tactical 1911 A1 FS in .45acp
winchester 1873 44.40
Marlin 336W .30.30
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
stag 5.56 m4 with reddot
jdad
Advanced Levergunner
Posts: 3442
Joined: Fri Sep 07, 2007 7:55 am
Location: Oregon

Re: winchester slide action info

Post by jdad »

It's a "parts gun". A partial one at that. It sounds like what's left is the proverbial "sewer pipe, with a fence post attached." Maybe $100-$150 if the wood hasn't been sanded.
I know a whole lot about very little and nothing about a whole lot.
User avatar
Hobie
Moderator
Posts: 13902
Joined: Sat Mar 31, 2007 1:54 pm
Location: Staunton, VA, USA
Contact:

Re: winchester slide action info

Post by Hobie »

Without the internals and in the condition described, I'd offer no more than $100 for it. It might be worth more, but I wouldn't offer more. A complete gun in this area is going for $700+ depending on condition and chambering (the 1890s are specifically one thing or another, the other models are .22 LR-L-S interchangeably).

PS - appears that JDAD and I were typing at about the same time!
Sincerely,

Hobie

"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: winchester slide action info

Post by Pete44ru »

.

I'm glad to hear you got the Pony Express knife OK. . :)

The value's based on the remaining % of original factory condition; with a heavy metal patina & worn off markings, I suspect it will only have a shooter value - maybe less if the stock wood is significantly worn, cracked, etc.

(David's got waaay faster fingers than me - maybe he's just has his AM turbocharge of coffee ;) )


.
User avatar
Sixgun
Posting leader...
Posts: 19243
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa. Where The Finest Winchesters & Colts Reside

Re: winchester slide action info

Post by Sixgun »

6
Last edited by Sixgun on Sun Jan 19, 2014 5:02 pm, edited 1 time in total.
Trump Display.. 4’x8’..—-Try To Take It…

Image
Hagler
Senior Levergunner
Posts: 1522
Joined: Sun Apr 15, 2007 12:52 am
Location: Leverland, U.S.A.
Contact:

Re: winchester slide action info

Post by Hagler »

rossim92,

This site may help you:

http://twoponies.home.mindspring.com/

Just follow the links, and you will see pictures & descriptions.

Shawn
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
ImageImage
Post Reply