Done

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Done

Post by COSteve »

Done
Last edited by COSteve on Sun May 30, 2021 4:53 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
JerryB
Advanced Levergunner
Posts: 5493
Joined: Mon Apr 02, 2007 9:23 pm
Location: Batesville,Arkansas

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by JerryB »

Any day you can shoot a bunch of .45 Colt loads is a real good day.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.

JOSHUA 24:15
Lefty Dude
Senior Levergunner
Posts: 1459
Joined: Wed Feb 06, 2008 6:31 pm
Location: Arizona Territory

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by Lefty Dude »

Now you need a Bond Derringer in 45 Colt/410, to go with your 45 pair. :wink:

I bought one a few months back. They are a handful to shoot.
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.

Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by pwl44m »

Sounds like fun until U got back Home. I have some 45 colts to wring out but not all at once. I have some brass cleaned up and ready to load. Just now getting some time to play. Glad everything worked out for Ya.
Perry
Perry in Bangor----++++===Calif
User avatar
Old Savage
Posting leader...
Posts: 16793
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by Old Savage »

Pics! Guns, targets etc. :)
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
User avatar
Griff
Posting leader...
Posts: 21016
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by Griff »

Old Savage wrote:Pics! Guns, targets etc. :)
Pics, or it didn't happen! :P :lol:

On my way out the door to do the same... reminded me to take the camera!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by COSteve »

Deleted
Last edited by COSteve on Wed Apr 30, 2014 10:58 am, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
FatJackDurham
Senior Levergunner
Posts: 1067
Joined: Sun Jan 01, 2012 10:18 am
Location: Morrisville,vt

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by FatJackDurham »

Can you mic the bores and cylinders and post the results?

I had an Uberti 357 and it was terrible. .359 cylinder throat and a .355/.359 bore. Not accurate past 20 yards.
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by COSteve »

Done
Last edited by COSteve on Sun May 30, 2021 4:53 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
FatJackDurham
Senior Levergunner
Posts: 1067
Joined: Sun Jan 01, 2012 10:18 am
Location: Morrisville,vt

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by FatJackDurham »

COSteve wrote: Per your request.
2009 Uberti Cattleman SA Cav (7.5" bbl) 357mag: Cylinders at throat - all six measured .361", barrel at muzzle - .356"
2013 Uberti Cattleman SAA (5.5" bbl) 45Colt: Cylinders at throat - all six measured .455", barrel at muzzle - .451"

THat is about what I recall. For some reason, the throat for the .357 is well over sized, where the grooves are just where they should be, perhaps a little tight. Meanwhile, a .455 cylinder throat on a .45 is just about right for a lead round.

This is why, I think, I have heard good things about the Uberti Cattleman .45, but my experience with the .357 was not as good.

On the other hand, I have not heard what the measurements are for the Pietta .357. I hAVE heard that the Ruger .357s are very well machined.
User avatar
COSteve
Advanced Levergunner
Posts: 3967
Joined: Sun Jul 12, 2009 4:03 pm

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by COSteve »

Done
Last edited by COSteve on Sun May 30, 2021 4:52 pm, edited 1 time in total.
Steve
Retired and Living the Good Life
No Matter Where You Go, There You Are
jd45
Levergunner 3.0
Posts: 935
Joined: Mon Sep 10, 2007 7:29 pm

Re: Shot my SAA 45 colt Uberti Cattleman Today

Post by jd45 »

Steve, I also have one of those Uberti '73 Sporting rifles in .45....just don't have a Marble's tang sight on it....YET! Tho I DO have a globe on the front. It is absolutely a work of art. It shoots, too! jd45
Post Reply