Seems, the extractor on my ( non AE ) 94, .44 Mag got wrong. Cycled an Alu Dummy round, and suddenly it would jam. Rifle won´t close.
It seems, the extractor is touching the top of the chamber and prevents closing the action.
My gunsmith ( who is NOT an LA Expert! ) says, there are no more ANY 94 extractors, not even at Numrich Arms.
What do you all say?
Smith it? Build it up with the torch or flame, then file it down to correct shape?
Labour intensive, to say the least. Also will interfere with the spring steel characteristics.
Where to get a replacement extractor? Cheap? Is it the same as the .30-30 one?
ANY Help is appreciated, Thanks in advance, Hermann
Win 94 44 Mag Extractor Help?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: Win 94 44 Mag Extractor Help?
Have you checked it with live ammo? I don't like aluminum or plastic dummies for checking an action. I use dummy cartridges I have made myself, and which I know to be in-spec.
Re: Win 94 44 Mag Extractor Help?
yes.
Doesn´t work.
Won´t even close EMPTY!
;-(
Doesn´t work.
Won´t even close EMPTY!
;-(
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Win 94 44 Mag Extractor Help?
Find another gunsmith.
Those extractors are out there. Just because Numrich doesn't have one today doesn't mean nobody has one.
Most likely if the action wont close the extractor is bent. That should be obvious to the naked eye. They can be straightened, but they might not last long afterwards.
Doing a search for the parts, or contact our own Nate Kiowa Jones, if anyone will know, he will.
Joe
Those extractors are out there. Just because Numrich doesn't have one today doesn't mean nobody has one.
Most likely if the action wont close the extractor is bent. That should be obvious to the naked eye. They can be straightened, but they might not last long afterwards.
Doing a search for the parts, or contact our own Nate Kiowa Jones, if anyone will know, he will.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- Griff
- Posting leader...
- Posts: 20859
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Win 94 44 Mag Extractor Help?
No available any more? Huh? Took less than 3 minutes to find.
What Joe said.
Winchester mdl 94 Extractor. Ain't cheap, but...
What Joe said.
Winchester mdl 94 Extractor. Ain't cheap, but...
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Win 94 44 Mag Extractor Help?
Thanks ...
"MidwestGunWorks.com does not accept any online order originating outside of the United States of America."
:-///
Ok, my order would have amounted to just less than $ 100, and then the next ...
Hermann
"MidwestGunWorks.com does not accept any online order originating outside of the United States of America."
:-///
Ok, my order would have amounted to just less than $ 100, and then the next ...
Hermann