Hovie
I am not sure if this is the right place for this so move it to the right place if you need to
I am trying to get enough people to do a group buy on a 45-70 300 grain solid in either gc or plain base and also a hollow point from this design and don't know the weight yet and should have some pics of the drawings with luck this weekend.
If you would like in on this mould could you let me know. I need fifteen others to make it happen. Have the mold maker all picked out and he does very good work and time frame should be around 3-5 months depending on how long it takes to get the needed buyers and his schedule of manufacturing.
They are much nicer then Lee molds and turn around time is much faster.
ever thought of gettting in on a group buy for a mould?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
ever thought of gettting in on a group buy for a mould?
In a free society the government doesn't fear its citizens
NRA Endowment member
DAV
NRA Endowment member
DAV
-
- Levergunner 3.0
- Posts: 996
- Joined: Fri Oct 24, 2008 9:19 pm
- Location: South East South Dakota
Re: ever thought of gettting in on a group buy for a mould?
I would post more data if you will.
Mould maker?
Projected as-cast diameter?
Shape and configuration of the boolit?
How many cavities?
Mould material?
And last, but most important, cost.
Cat
Mould maker?
Projected as-cast diameter?
Shape and configuration of the boolit?
How many cavities?
Mould material?
And last, but most important, cost.
Cat
Re: ever thought of gettting in on a group buy for a mould?
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: ever thought of gettting in on a group buy for a mould?
tycer
Blammer is my bullet designer so until he gets the finished design to me and I approve it we will all have to wait.
Blammer is my bullet designer so until he gets the finished design to me and I approve it we will all have to wait.
In a free society the government doesn't fear its citizens
NRA Endowment member
DAV
NRA Endowment member
DAV
-
- Levergunner 3.0
- Posts: 933
- Joined: Wed Jan 21, 2009 1:08 am
- Location: Salmon Creek, SW Washington
Re: ever thought of gettting in on a group buy for a mould?
I'm interested in a 300gr PB. I have a couple of 300gr CG models and have been thinking seriously about a PB model. FN or hollow point.
2x22
2x22
"Yes, we did produce a near-perfect republic. But will they keep it? Or will they, in the enjoyment of plenty, lose the memory of freedom? Material abundance without character is the path of destruction." - Thomas Jefferson
Re: ever thought of gettting in on a group buy for a mould?
this is what I am thinking of
![Image](http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/458%20cal/280grHP460Stew.jpg)
![Image](http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/458%20cal/300grFP460Stew.jpg)
I will be running the GB and we well be using Night Owl Enterprise (NOE) to make our moulds
A minimum of 15 orders for moulds is required.
You may order any number of cavities available. You will just need to pay the appropriate price.
1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.
plain base or gas checked version on this GB.
The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.
Shipping to you with insurance will be $10
A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube
catshooter anything I forgot?
![Image](http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/458%20cal/280grHP460Stew.jpg)
![Image](http://i54.photobucket.com/albums/g81/blammer8mm/Cast%20boolits/458%20cal/300grFP460Stew.jpg)
I will be running the GB and we well be using Night Owl Enterprise (NOE) to make our moulds
A minimum of 15 orders for moulds is required.
You may order any number of cavities available. You will just need to pay the appropriate price.
1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.
plain base or gas checked version on this GB.
The hollow point option for one cavity will be the standard $35.
Blank Hollow point pins will be an extra $1.50 each.
Shipping to you with insurance will be $10
A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube
catshooter anything I forgot?
In a free society the government doesn't fear its citizens
NRA Endowment member
DAV
NRA Endowment member
DAV
-
- Levergunner 3.0
- Posts: 933
- Joined: Wed Jan 21, 2009 1:08 am
- Location: Salmon Creek, SW Washington
Re: ever thought of gettting in on a group buy for a mould?
I like it. Put me down as a FOR SURE.
2 cavity
PB
1 HP cavity
I bet I just missed it, but is this going to be an iron mould?
2x22
2 cavity
PB
1 HP cavity
I bet I just missed it, but is this going to be an iron mould?
2x22
"Yes, we did produce a near-perfect republic. But will they keep it? Or will they, in the enjoyment of plenty, lose the memory of freedom? Material abundance without character is the path of destruction." - Thomas Jefferson
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: ever thought of gettting in on a group buy for a mould?
I got in on the group buy for the .360-180 gr. N.O.E. mold a couple months back. The mold is of Aluminum and of very good quality with large blocks and very heavy sprue plate. It uses Lee 6 cavity handles (not supplied) and casts an almost perfectly round bullet
@ .3615 dia. .
I have all the .45 molds I need or I would jump right on this one. Buy with confidence and Blammer is a good guy.
Go to castboolets.com for more info.![Very Happy :D](./images/smilies/icon_biggrin.gif)
@ .3615 dia. .
I have all the .45 molds I need or I would jump right on this one. Buy with confidence and Blammer is a good guy.
Go to castboolets.com for more info.
![Very Happy :D](./images/smilies/icon_biggrin.gif)