PAY IT FORWARD

44/40 · Post by **44/40** » Tue Jun 03, 2008 11:25 pm

You've got the 6.5 Swede dies Trailsman. Send me your mailing address and I'll get them out to you.

41 Redhawk · Post by **41 Redhawk** » Wed Jun 04, 2008 7:34 am

rjohns94 wrote:41 Redhawk - the dies are on their way to you in am.

Got them Monday. Thanks rjohns!

Trailsman · Post by **Trailsman** » Wed Jun 04, 2008 5:29 pm

I can offer up for dibs a set of 9 mm dies . thay are not carbide but work well. Trailsman

Yance · Post by **Yance** » Sat Jun 07, 2008 4:43 pm

Got a neat Gerber knife in Friday's mail.

Thanks budliteguy!

budliteguy · Post by **budliteguy** » Sat Jun 07, 2008 10:05 pm

Thanks
Dajudge you should get one too, I mailed them both the same day.

dajudge43 · Post by **dajudge43** » Sun Jun 08, 2008 12:39 pm

I did get mine, thats a fine little knife, I put my old parker up and put this in my pocket, thanks a lot

dajudge43 · Post by **dajudge43** » Thu Jun 12, 2008 7:13 pm

I offered this one time, on another forum, somebody claimed it, but never sent their address, it is a "Engineer" lensatic compass, not as expensive one as my military issue one, but just as accurate as far as i could tell, first i'll take it, pm me your address and it will be on its way

JeffG · Post by **JeffG** » Thu Jun 12, 2008 7:25 pm

PM sent to dajudge about his compass.
JeffG

levers · Post by **levers** » Thu Jun 12, 2008 10:32 pm

I sent my address on the compass back when it was first posted a month or so ago....it still shows in my "outbox". I sent a follow up PM but I've never heard back.

Travis Morgan · Post by **Travis Morgan** » Fri Jun 13, 2008 10:26 am

Got the Vaquero grips in the mail the other day. Thanks!

Will get to the post office with the stuff I promised as soon as the Doc says I can drive.

levers · Post by **levers** » Mon Jun 16, 2008 9:38 am

PM sent to Dajudge....

Pathfinder09 · Post by **Pathfinder09** » Mon Jun 16, 2008 2:59 pm

I've got some once fired .450 Marlin brass that needs a good home. Free to a good home. I have a couple of boxes of once fired .375 Ruger also up for grabs. Let me know folks. I'm in Oregon.

Travis Morgan · Post by **Travis Morgan** » Mon Jun 16, 2008 11:31 pm

Anyone need any .38 brass?

DanL · Post by **DanL** » Wed Jun 18, 2008 2:26 pm

Hi Tavis Morgan,

I would like the .38 brass. PM sent.

DanL

pharmseller · Post by **pharmseller** » Sun Jun 22, 2008 8:19 pm

First PM gets an unopened carton (50 count) of 250 gr. Barnes bullets in .348 Win. flat nose.

Quinn

salvo · Post by **salvo** » Sun Jun 22, 2008 8:43 pm

pharmseller, I'll take the .348!

pharmseller · Post by **pharmseller** » Sun Jun 22, 2008 10:29 pm

On the way to Salvo

Q

salvo · Post by **salvo** » Mon Jun 23, 2008 9:26 am

Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.

bsaride · Post by **bsaride** » Mon Jun 23, 2008 10:03 am

salvo wrote:Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.

I''l take it.

Sending PM

Travis Morgan · Post by **Travis Morgan** » Mon Jun 23, 2008 10:06 am

bsaride wrote:
salvo wrote:Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.
I''l take it.

Sending PM

DAMMIT!

salvo · Post by **salvo** » Mon Jun 23, 2008 3:17 pm

salvo wrote:Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.

Side Saddle on the way to bsaride

rjohns94 · Post by **rjohns94** » Mon Jun 23, 2008 8:04 pm

I have a 14 foot wooden canoe, of a chesapeake crab skiff type, made of marine plywood with wooden double paddle. Must be able to pick it up from location between York Pa - Baltimore Md. I will not ship. Life change forces me to get rid of it. has two teak seats and is completely water proof (does not leak)

Old Ironsights · Post by **Old Ironsights** » Mon Jun 23, 2008 8:32 pm

rjohns94 wrote:I have a 14 foot wooden canoe, of a chesapeake crab skiff type, made of marine plywood with wooden double paddle. Must be able to pick it up from location between York Pa - Baltimore Md. I will not ship. Life change forces me to get rid of it. has two teak seats and is completely water proof (does not leak)

But, but... I want a leaky boat that I have nowhere to store. It reminds me of Congress.

Takes up space, and will kill you if you trust it too far out.

rjohns94 · Post by **rjohns94** » Mon Jun 23, 2008 9:14 pm

I have two canoes, must be both sides of the house

Travis Morgan · Post by **Travis Morgan** » Mon Jun 23, 2008 11:36 pm

Mike,

Just fill it with guns and send it out here! That's an incredibly generous offer. Too bad gas is so high; that'd be reason enough for a road trip. I'll have your holster in the mail in the next coupla days, if I don't end up getting sick. I'm feeling kinda woozy right now.

rjohns94 · Post by **rjohns94** » Tue Jun 24, 2008 5:03 am

Travis, I hope you feel better soon. Pain sucks. You are in my prayers.

alnitak · Post by **alnitak** » Tue Jun 24, 2008 11:49 pm

Mike....Let's talk on that canoe, if it's still available. I can come pick it up.

rjohns94 · Post by **rjohns94** » Wed Jun 25, 2008 6:59 am

Alnitak, the canoe has been spoken for. Sorry. (thought you have a canoe?)

alnitak · Post by **alnitak** » Wed Jun 25, 2008 7:57 am

Mike. No problem. No, the canoe I have is a friend's that I am borrowing. I wanted to return it to him.

Thanks anyway. That's a generous offer and PIF for someone. God bless.

rjohns94 · Post by **rjohns94** » Wed Jun 25, 2008 8:42 am

Ok, I have the other 16 footer that may need a home soon. I will contact you about that one directly. blessings

2ndovc · Post by **2ndovc** » Wed Jun 25, 2008 7:54 pm

I have a " One Ragged Hole" rear sight off a Win 94 that I bought from these classifieds. I don't care for it and replaced it w/ a Marbles semi-buckhorn. PM me if interested. Otherwise it's just gonna sit in my parts box.

jasonb

Sight's been sent to Travis M.

Thanks. Hope you like it.

Travis Morgan · Post by **Travis Morgan** » Thu Jun 26, 2008 12:24 am

Is there anything YOU need? I'd sure like to have that rear sight for a build I'm slowly working on.

bsaride · Post by **bsaride** » Sat Jun 28, 2008 5:44 pm

salvo wrote:
salvo wrote:Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.
Side Saddle on the way to bsaride

Came in today, thanks.
Jay

salvo · Post by **salvo** » Sat Jun 28, 2008 7:04 pm

Good deal bsaride!
I had it mounted on my 590A1 for a short time. Tried to find the instruction's but no luck.
If you have any questions getting it installed, just give me a yell.

pharmseller · Post by **pharmseller** » Sat Jun 28, 2008 8:24 pm

salvo wrote:
salvo wrote:Thanks Quinn!

I'll offer up a Side Saddle for a Mossberg 500/590 12 ga.
Side Saddle on the way to bsaride

Salvo,
Check your front porch Tuesday for the .348 bullets.

Q

salvo · Post by **salvo** » Sat Jun 28, 2008 9:28 pm

Quinn, I'm keeping my eyes peeled

salvo · Post by **salvo** » Tue Jul 01, 2008 6:33 pm

pharmseller you were right, the bullets showed up today!
Thank you.

JeffG · Post by **JeffG** » Wed Jul 02, 2008 9:42 am

Cherry gun box (finally) went out to Elkhunter today via UPS. I hope you find it on your porch early next week. JeffG

Elkhunter1 · Post by **Elkhunter1** » Wed Jul 02, 2008 10:35 am

Jeff -

I can't wait to see it and will post a picture back here once recieved. Thank you, thank you, thank you.

Best regards - Todd

Elkhunter1 · Post by **Elkhunter1** » Tue Jul 15, 2008 9:25 am

Looks like the sight could use a kick start again as it's slowed down as of late. Surely we haven't cleaned out all of our "collection" drawers yet.

Well I'm about to move and am packing my precious goods up and I found a set of 7mm Remington Ultra Magnum dies that i just don't need. They are a Lyman 2 die set, gently used and well taken care of. Not really lever gun stuff, but we all have a few "oddballs" in our gun closets don't we.

First to claim wins the prize.

By the way, Jeff G builds the most beautiful gun cases I've ever seen. I consider myself the grand prize winner as the case he built me is now a treasured possesion and will house my shiloh sharps as if they re made for each other.

Post by **Ysabel Kid** » Tue Jul 15, 2008 11:39 am

I imagine some of the "pay it forward" stuff of late has been redirected to 86er as he accumulates stuff for his annual "levergunscommunity.com" support drive. He does this via an auction of the same stuff - and reloading anything goes pretty quickly.

We need to keep this post running, but I imagine (hope) it may be dry for a bit here...

JReed · Post by **JReed** » Thu Jul 31, 2008 9:38 pm

I am still unpacking all my gun stuff I may have a few things to offer up soon once the dust settels.

86er · Post by **86er** » Thu Aug 28, 2008 3:36 pm

Up for grabs:

1 - Uncle Mikes black nylon and polymer RH hip holster (duty type) for 4" DA revolver, w/ thumbreak excellent condition.

2- Black leather dump pouch 6 rounds for 38/357.

3 - RH holster for 4 5/8" SA revolver or small frame DA, saddle leather, cowboy style but added two reinforcement straps for security during heavy trail riding, leg lanyard. Not real pretty but real practical.

Old Ironsights · Post by **Old Ironsights** » Thu Aug 28, 2008 5:41 pm

86er wrote:Up for grabs:

1 - Uncle Mikes black nylon and polymer RH hip holster (duty type) for 4" DA revolver, w/ thumbreak excellent condition.

2- Black leather dump pouch 6 rounds for 38/357.

3 - RH holster for 4 5/8" SA revolver or small frame DA, saddle leather, cowboy style but added two reinforcement straps for security during heavy trail riding, leg lanyard. Not real pretty but real practical.

Will either of those rigs fit that Sentinel I got from you (esp the Uncle Mikes)??

86er · Post by **86er** » Thu Aug 28, 2008 6:18 pm

OI - Yup, maybe both. Shoot me your address again please.

lever-4-life · Post by **lever-4-life** » Thu Aug 28, 2008 8:19 pm

I have a pair of N.I.P. pachmayrs for a square butt J-frame smith to anybody who needs em

Old Ironsights · Post by **Old Ironsights** » Thu Aug 28, 2008 8:30 pm

86er wrote:OI - Yup, maybe both. Shoot me your address again please.

PM Sent. I'll try them both and re-post the one I don't need.

Tycer · Post by **Tycer** » Thu Aug 28, 2008 8:59 pm

I have an Uncle Mike's #8103 LH and a #8104 LH

86er · Post by **86er** » Wed Sep 03, 2008 6:52 pm

OI - Sent you one holster today. Who wanted the dump pouch? Send me your address.

woodsoup · Post by **woodsoup** » Mon Sep 08, 2008 8:02 pm

If this belongs elsewhere please move it.

I sorted out my used brass the other day and found some I have no use for, thanx to the kids.

I have up for grabs:

54- 44 Rem Mag
11- 44S&W Spl
54- 30-30 Win
2- 270 Win
13- 243 Win
7- 22-250

All is once fired.

I ran it through the burnisher to remove the majority of the dirt/soot. None of it has been deprimed or sized.

For monetary reasons I'd like it all to go to the same person if possible.