rifle t/d

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rlauckhardt
Levergunner
Posts: 1
Joined: Sun Jun 22, 2008 1:57 pm

rifle t/d

Post by rlauckhardt »

I have a Marlin 1893 take down rifle. After moving the t/d lever, what next? Can't get it apart.
Top
longarm4146
Levergunner 2.0
Posts: 185
Joined: Sun Dec 16, 2007 5:06 pm
Location: north carolina

Re: rifle t/d

Post by longarm4146 »

don't know about Marlins but have 2 winchesters. Lever open, unscrew take-down lever, then turn 1/4/ turn on them.
SASS 4146
BOLD 199
Top
airedaleman
Levergunner 3.0
Posts: 982
Joined: Thu Sep 06, 2007 9:05 pm
Location: New Kent County, VA

Re: rifle t/d

Post by airedaleman »

The end of the magazine tube should have a latch. Depress the latch, pull the magazine tube forward until it stops, and then unscrew the barrel assembly from the receiver ( full right-hand thread). Hope this helps.
Riamh Nar Dhruid O Spairn Lann
- motto on the Irish Regiments' flags
Top
lozen
Levergunner
Posts: 45
Joined: Fri Dec 21, 2007 5:38 am

Re: rifle t/d

Post by lozen »

Make sure you open the action before you unscrew the barrel.
Top
Post Reply

Return to “General Discussion”