Suggestions?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Ysabel Kid
Moderator
Posts: 27873
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:
Contact Ysabel Kid

Suggestions?

Post by Ysabel Kid »

Okay, somehow I misplaced the key to a rifle case. The lock looks like this:

Image

I've tried to pick it, but suspect I just messed up the lock.

Other than a small application of high explosives, any suggestions?
Image
Top
Bronco
Levergunner 3.0
Posts: 912
Joined: Sat Sep 08, 2007 12:03 am
Location: Idaho

Re: Suggestions?

Post by Bronco »

Lock smith, if you want to try and save the lock!
Gettin old ain't for sissies!
There just has to be dogs in heaven !
Top
.45colt
Advanced Levergunner
Posts: 4736
Joined: Fri Sep 07, 2007 5:00 am
Location: North Coast of America-Ohio

Re: Suggestions?

Post by .45colt »

I would make a methodical search of the house. slow & steady . We had a locking fireproof strongbox for documents. didn't open it in years. lost the key. Momma was NUTS. I ended up cutting it open with an angle grinder , and we bought a new one. Not long after looking on top of one of the cupboards we found a little basket where we had spare keys. there it was. forgot about that. Momma was :twisted: . :shock: .
Top
User avatar
2ndovc
Advanced Levergunner
Posts: 9340
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Suggestions?

Post by 2ndovc »

I had a roommate in college with a suitcase he used with a similar lock. He was always misplacing the key. I got it open by pushing in on the lock with a small screwdriver in the hole while prying up the latch with a knife blade.

jb 8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
Top
User avatar
Grizz
Advanced Levergunner
Posts: 11919
Joined: Fri Aug 31, 2007 7:15 pm

Re: Suggestions?

Post by Grizz »

Ysabel Kid wrote: ↑Tue Feb 21, 2023 8:54 am Okay, somehow I misplaced the key to a rifle case. The lock looks like this:

Image

I've tried to pick it, but suspect I just messed up the lock.

Other than a small application of high explosives, any suggestions?

SAA ?
Top
User avatar
jeepnik
Advanced Levergunner
Posts: 6883
Joined: Sun Apr 08, 2007 1:39 pm
Location: On the Beach

Re: Suggestions?

Post by jeepnik »

Drill the rivets. Start by filling the rivet flat. Center punch and carefully drill out using incrementally larger its. Do the two on the latch not the lock.
Jeepnik AKA "Old Eyes"
"Go low, go slow and preferably in the dark" The old Sarge (he was maybe 24.
"Freedom is never more that a generation from extinction" Ronald Reagan
"Every man should have at least one good rifle and know how to use it" Dad
Top
User avatar
GunnyMack
Advanced Levergunner
Posts: 10133
Joined: Mon Sep 19, 2016 7:57 am
Location: Not where I want to be!

Re: Suggestions?

Post by GunnyMack »

jeepnik wrote: ↑Tue Feb 21, 2023 11:34 am Drill the rivets. Start by filling the rivet flat. Center punch and carefully drill out using incrementally larger its. Do the two on the latch not the lock.
Thats the way to go, THEN explosives! :lol:
BROWN LABS MATTER !!
Top
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Suggestions?

Post by Blaine »

:oops:
You do not have the required permissions to view the files attached to this post.
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Top
4t5
Senior Levergunner
Posts: 1265
Joined: Sat Sep 15, 2007 8:28 am

Re: Suggestions?

Post by 4t5 »

File the rivets x 2 on the latch, if they are hardened use a cut off wheel.
Rumble.com/ hickock45
Top
User avatar
Griff
Posting leader...
Posts: 20850
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: Suggestions?

Post by Griff »

GunnyMack wrote: ↑Tue Feb 21, 2023 12:33 pm
jeepnik wrote: ↑Tue Feb 21, 2023 11:34 amDrill the rivets. Start by filling the rivet flat. Center punch and carefully drill out using incrementally larger its. Do the two on the latch not the lock.
Thats the way to go, THEN explosives! :lol:
+1. Then, when you've reassembled and gotten a locksmith to make new keys... keep them IN the case until in actual use. Another good reason to like my Pelican cases... uses padlocks, Easily scrapped and replaced when losing keys... or forgetting combinations! :oops:
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
User avatar
Ysabel Kid
Moderator
Posts: 27873
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:
Contact Ysabel Kid

Re: Suggestions?

Post by Ysabel Kid »

Did another search, and found the key... then broke the lock. Ended up cutting it off carefully. Argh!
Image
Top
Post Reply

Return to “General Discussion”