jnyork's new toy
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 4443
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
jnyork's new toy
Bought this old jewel a couple of weeks ago from a friend at the range. Have been wanting one for about 20 years or so but the opportunity did not arise until now.
This is a Stevens
Model 417 Walnut Hill .22 target rifle. Heavy barrel 28" , weighs about 10 1/2 pounds. All original, Lyman 48L rear sight and 17A front. Original scope blocks and sling swivels. Shows the years in a few ways but action is nice and tight, ejector very snappy, really nice crisp trigger at about 2 lbs. Wood and steel on this rifle are about 90% or better average condition, metal has some flecks or little pits in places from long ago dampness. Metal retains almost all of the original blue and case hardening, wood is mostly free of any sort of battle scars. Bore is nlce and shiney. Rifle was built some where in the 1930's . serial number is 20xx.
Took it to the range after a thorough cleaning and lubing. With SK Standard+ it would hold the 10 ring in the A23 50 yard target, but would throw a flyer out in the 9 ring every so often. I suspect I might have to recrown the barrel.
I am happy with my new toy and wanted to share with my friends here on the board.
This is a Stevens
Model 417 Walnut Hill .22 target rifle. Heavy barrel 28" , weighs about 10 1/2 pounds. All original, Lyman 48L rear sight and 17A front. Original scope blocks and sling swivels. Shows the years in a few ways but action is nice and tight, ejector very snappy, really nice crisp trigger at about 2 lbs. Wood and steel on this rifle are about 90% or better average condition, metal has some flecks or little pits in places from long ago dampness. Metal retains almost all of the original blue and case hardening, wood is mostly free of any sort of battle scars. Bore is nlce and shiney. Rifle was built some where in the 1930's . serial number is 20xx.
Took it to the range after a thorough cleaning and lubing. With SK Standard+ it would hold the 10 ring in the A23 50 yard target, but would throw a flyer out in the 9 ring every so often. I suspect I might have to recrown the barrel.
I am happy with my new toy and wanted to share with my friends here on the board.
- Rimfire McNutjob
- Advanced Levergunner
- Posts: 3212
- Joined: Mon Sep 03, 2007 2:51 pm
- Location: Sanford, FL.
Re: jnyork's new toy
Beautiful rifle. I love 22's. Now you'll need the period scope ... maybe snag a Unertl.
... I love poetry, long walks on the beach, and poking dead things with a stick.
-
- Advanced Levergunner
- Posts: 4443
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: jnyork's new toy
Thanks, I have a Lyman but I'm in Arizona and it's in Wyoming, will have to wait 'till spring.Rimfire McNutjob wrote: ↑Wed Nov 09, 2022 4:48 pm Beautiful rifle. I love 22's. Now you'll need the period scope ... maybe snag a Unertl.
-
- Levergunner 3.0
- Posts: 516
- Joined: Wed Dec 09, 2020 12:39 am
Re: jnyork's new toy
That's a looker for sure. Congrats on adding that checkmark.
- Shasta
- Senior Levergunner
- Posts: 1560
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: jnyork's new toy
Congratulations on scoring a very fine rifle!
One showed up here at a local shop a couple years ago priced at $1,700. Mr. Flat Pockets here could not swing that, but the rifle still sold very quickly.
I have a friend with one that is traditionally scoped (I believe it was a Lyman Target Spot), and he let me shoot his rifle at one of our local club's .22 Long Range Silhouette matches where the targets are 3/8 scale Chickens shot offhand at 50 meters, and 100 meter Pigs, 150 meter Turkeys, and 200 meter Rams shot from cross-sticks. Using CCI Standard Velocity ammo, I was able to shoot 29/40, a Master score for the discipline. They are indeed a very high quality target rifle!
Shasta
One showed up here at a local shop a couple years ago priced at $1,700. Mr. Flat Pockets here could not swing that, but the rifle still sold very quickly.
I have a friend with one that is traditionally scoped (I believe it was a Lyman Target Spot), and he let me shoot his rifle at one of our local club's .22 Long Range Silhouette matches where the targets are 3/8 scale Chickens shot offhand at 50 meters, and 100 meter Pigs, 150 meter Turkeys, and 200 meter Rams shot from cross-sticks. Using CCI Standard Velocity ammo, I was able to shoot 29/40, a Master score for the discipline. They are indeed a very high quality target rifle!
Shasta
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
- CowboyTutt
- Advanced Levergunner
- Posts: 3789
- Joined: Tue Sep 11, 2007 8:27 pm
- Location: Mission Viejo, CA
Re: jnyork's new toy
That's pretty neat! Thanks for sharing!!! -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
- Griff
- Posting leader...
- Posts: 21016
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: jnyork's new toy
Congrats on scoring a fine rifle!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- earlmck
- Advanced Levergunner
- Posts: 3541
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: jnyork's new toy
A couple fellows have been shooting (and scoring very well) with Stevens 44's at our vintage/lever match. But theirs do no't have such a fine heavy barrel as that one. Very very nice!
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
Re: jnyork's new toy
Very nice. Hope you figure out those flyers.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
- CowboyTutt
- Advanced Levergunner
- Posts: 3789
- Joined: Tue Sep 11, 2007 8:27 pm
- Location: Mission Viejo, CA
Re: jnyork's new toy
Its been a very long time, but I think it was in one of McPherson's books (Accurizing the Factory Rifle, I suspect) that he wrote about recrowning a barrel with a marble and some polishing compound of some sort. My gun books are all packed up right now. If I find the book again, I will look it up and see what I find. It probably would not work on some applications depending on crown shape. Regards, -Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
- 2ndovc
- Advanced Levergunner
- Posts: 9453
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: jnyork's new toy
That's really a nice looking .22!
Have fun!
jb
Have fun!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: jnyork's new toy
along those lines i've seen articles on using the roller ball from a mouse, old school, when mice had rollers, and maybe valve grinding compound for crowning barrel after cutting it. seems like a countersink would help to cut the square edge back first . . . †CowboyTutt wrote: ↑Thu Nov 10, 2022 1:40 am Its been a very long time, but I think it was in one of McPherson's books (Accurizing the Factory Rifle, I suspect) that he wrote about recrowning a barrel with a marble and some polishing compound of some sort. My gun books are all packed up right now. If I find the book again, I will look it up and see what I find. It probably would not work on some applications depending on crown shape. Regards, -Tutt
Re: jnyork's new toy
Cool beans pard thanks for sharing.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: jnyork's new toy
That looks as new. Awesome find.
What's the trigger like ? Light and crisp?
What's the trigger like ? Light and crisp?
Psalm ch8.
Because I wish I could!
Because I wish I could!