375 Marlin Hammer Spur - Needed
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
375 Marlin Hammer Spur - Needed
I have several for the newer wide hammer style, but don't have any spares for the old narrow hammer. Does anyone have 1 or 2 they want to sell? Thanks, Dave.
- Griff
- Posting leader...
- Posts: 20875
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: 375 Marlin Hammer Spur - Needed
Ain't sure, but Numrich lists one for the Marlin 375, and the detail shows it's the same as the 1895. Didn't know there were different width hammers. Mine wears a scope and needs the spur, otherwise...azoil wrote:I have several for the newer wide hammer style, but don't have any spares for the old narrow hammer. Does anyone have 1 or 2 they want to sell? Thanks, Dave.
Last edited by Griff on Mon Sep 03, 2007 11:35 pm, edited 1 time in total.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Old Savage
- Posting leader...
- Posts: 16740
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Griff,Ain't sure, but Numrich lists one for the Marlin 375, and the detail shows it's the same as the 1895. Didn't know there were different width hammers. Mine wears a scope and needs the spur, otherwise...
The pre saftey hammers were slimmer than the newer ones by about 1/8" or so. The old type are one thickness thruout but the newer are the same where it pivots but fatter where it fits thru the upper tang & rear of the bolt.