Any WWI artillery shell experts here?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Any WWI artillery shell experts here?
I was shown what I suspect is an inert WWI, possibly British, artillery shell that I’m stumped in identifying. A friend has had it for years and recently showed it to me. What’s unusual is it’s marked as a 70m/m which is smaller than the very common 75mm projectiles.
Searching the internet shows there is lots on artillery brass cases, many made into trench art, but much less on the projectiles themselves. (Probably because someone had to disassemble the projectiles and remove the explosive charge and fuse to become a souvenir.)
Can anyone point me to a resource that could identify this projectile?
Jason
Pictures of the shell at:
https://m.imgur.com/a/oWvn5vG
Searching the internet shows there is lots on artillery brass cases, many made into trench art, but much less on the projectiles themselves. (Probably because someone had to disassemble the projectiles and remove the explosive charge and fuse to become a souvenir.)
Can anyone point me to a resource that could identify this projectile?
Jason
Pictures of the shell at:
https://m.imgur.com/a/oWvn5vG
- gamekeeper
- Spambot Zapper
- Posts: 17388
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Any WWI artillery shell experts here?
No expert here but the BL 2.75 inch Mountain Gun fired a 70mm projectile and was used during the First World War.
You do not have the required permissions to view the files attached to this post.
If more men loved and cherished their wives as much as I love bacon the world would be a much better place.
Re: Any WWI artillery shell experts here?
.
I'm certainly no expert either, Jason - but it looks like that projectile still has it's (nose) fuse, and may very well still be "live" (not "inert"), so please take care.
My google-fu, however, tells me that:
The 70mm HE (high explosive) projectile (aka: 2.75") was used in a "mountain howitzer" that was adopted in 1911 and began entering service in 1914.
The weapon served primarily with the Indian Mountain Artillery in the northwest portion of British Indian territory (on what is now the border between Pakistan and Afghanistan) and participated in British-led military action in that theatre.
It also served in Mesopotamia and the Salonika front during World War I.
Due to its specialized nature, the gun itself was produced in only limited numbers, with just 183 manufactured during the war (WWI), when it got replaced with the 3.7" mountain howitzer.
It was a screw gun design, where the barrel could be separated into two parts via a screw joint.
This allowed for the gun to have a heavier barrel, but still be broken into smaller portions for transport by mule teams.
This was important for a weapon designed to be used in mountainous and rough terrain, or where adequate vehicle and horse transport was not readily available.
The weapon could be carried by six mules or towed.
.
I'm certainly no expert either, Jason - but it looks like that projectile still has it's (nose) fuse, and may very well still be "live" (not "inert"), so please take care.
My google-fu, however, tells me that:
The 70mm HE (high explosive) projectile (aka: 2.75") was used in a "mountain howitzer" that was adopted in 1911 and began entering service in 1914.
The weapon served primarily with the Indian Mountain Artillery in the northwest portion of British Indian territory (on what is now the border between Pakistan and Afghanistan) and participated in British-led military action in that theatre.
It also served in Mesopotamia and the Salonika front during World War I.
Due to its specialized nature, the gun itself was produced in only limited numbers, with just 183 manufactured during the war (WWI), when it got replaced with the 3.7" mountain howitzer.
It was a screw gun design, where the barrel could be separated into two parts via a screw joint.
This allowed for the gun to have a heavier barrel, but still be broken into smaller portions for transport by mule teams.
This was important for a weapon designed to be used in mountainous and rough terrain, or where adequate vehicle and horse transport was not readily available.
The weapon could be carried by six mules or towed.
.
Re: Any WWI artillery shell experts here?
Not an expert either but just from casual observation, as was already stated the fuse seems to still be intact which might be of some concern. It would be nice to know if 1) it still has the HE component in the shell, and 2) if the fuse is still intact.
Judging from the driving band it doesn't show any rifling so I'd say it was never fired .
Judging from the driving band it doesn't show any rifling so I'd say it was never fired .
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: Any WWI artillery shell experts here?
It’s definitely insert. That’s the first thing I wanted to make sure of myself so I tapped on it with a hammer to see if it sounded hollow...
Just kidding. The fuse unscrews and the shell was emptied out years ago. The fuse is just a cap with nothing other than the shell. The fuse must have been an impact fuse versus a timed fuse because there are no rotating dials to set time.
I did find references to the 2.75” mountain gun but projectile imaged I’ve found showed a much shorter shell. Also the mountain gun was very low production and my guy feel says it’s more likely to be something common.
I’ve not found any references to the markings on the bottom.
Just kidding. The fuse unscrews and the shell was emptied out years ago. The fuse is just a cap with nothing other than the shell. The fuse must have been an impact fuse versus a timed fuse because there are no rotating dials to set time.
I did find references to the 2.75” mountain gun but projectile imaged I’ve found showed a much shorter shell. Also the mountain gun was very low production and my guy feel says it’s more likely to be something common.
I’ve not found any references to the markings on the bottom.
- AJMD429
- Posting leader...
- Posts: 32043
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Any WWI artillery shell experts here?
The 'PEW' is just signifying the noise it makes when fired - "....pew, pew, pew...."
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
- GunnyMack
- Advanced Levergunner
- Posts: 10065
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Any WWI artillery shell experts here?
Since it only has PEW on it it must have been a training round. Otherwise it would have had PEW- BOOM stamped on it.
BROWN LABS MATTER !!
- 2ndovc
- Advanced Levergunner
- Posts: 9323
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Any WWI artillery shell experts here?
That was my first thought too!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
- GunnyMack
- Advanced Levergunner
- Posts: 10065
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Any WWI artillery shell experts here?
Naw just bring it to the Maine Gun Room and we will build something to shoot it!
BROWN LABS MATTER !!
-
- Levergunner 3.0
- Posts: 509
- Joined: Sat Aug 03, 2013 12:21 pm
Re: Any WWI artillery shell experts here?
Anybody ever notice that a 40mm Bofors autocannon round looks just like a huge .22 Hornet? I wonder how that happened.
Re: Any WWI artillery shell experts here?
Good pick out Mike...I never noticed that until now. I may have an answer......Mike Armstrong wrote: ↑Thu Oct 31, 2019 2:12 pm Anybody ever notice that a 40mm Bofors autocannon round looks just like a huge .22 Hornet? I wonder how that happened.
Maybe it's the same way the .223, 30-06, and the 50 BMG all look the same. The boys knew then what worked ...and worked to perfection........all this Remington ultra mag b.s. along with about every cartridge except the 40 S&W developed in the last 50 years is just that...b.s.
At our long range half scale silhouette matches I've been giving the 6.5 Creedmore guys with 5 K setups a little bit of competition using a stock 16" AR in .223 and a cheap $500 Vortex using 77 Sierra Matchkings. I'm about 4 hits out of 40 from catching up in their class. I'll soon be working with the new Berger VLD 85.5 gr. Hybrids and confidently, will be knocking them off their high horse. ---6
-
- Levergunner 3.0
- Posts: 509
- Joined: Sat Aug 03, 2013 12:21 pm
Re: Any WWI artillery shell experts here?
I'm with you on the new "wonder cartridges" that come along so often....the game doesn't change, the land changes very little, the human body doesn't change much. So why would the basic weapons that are associated with these things change much?
My son got a commendation for killing a sniper in Afghanistan at a range of nearly 400 meters. With one shot from an M-16 (not an M-4) with a basic issue optical sight. Reason? The rifle and cartridge were adapted to that military use over time by improved military specifications, and he was "issued" excellent vision (not by the USMC, although they taught him how to use the rifle).
I don't hunt big game any more at 76+, but when I did my favorite--and most successful--rifles were chambered for the .30-40 "Craig" as we used to call it....
Leverguns is FUN, no?
Mike Armstrong
My son got a commendation for killing a sniper in Afghanistan at a range of nearly 400 meters. With one shot from an M-16 (not an M-4) with a basic issue optical sight. Reason? The rifle and cartridge were adapted to that military use over time by improved military specifications, and he was "issued" excellent vision (not by the USMC, although they taught him how to use the rifle).
I don't hunt big game any more at 76+, but when I did my favorite--and most successful--rifles were chambered for the .30-40 "Craig" as we used to call it....
Leverguns is FUN, no?
Mike Armstrong