Lawn mower build update ( video added )
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- GunnyMack
- Advanced Levergunner
- Posts: 10133
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Lawn mower build update ( video added )
Tranny fluid!? Careful it doesnt turn into a Prius!
BROWN LABS MATTER !!
Re: Lawn mower build update ( video added )
Cool looking machine you got there Pitchy Is it a Clinton engine?
Re: Lawn mower build update ( video added )
Thanks it`s a 1 1/2 hp Lauson.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Marvin or anyone know what this is, there`s a light horizontal spring in the bottom.
Crank case breather, primer ?
Crank case breather, primer ?
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Senior Levergunner
- Posts: 1406
- Joined: Mon Jul 28, 2008 8:33 pm
- Location: West central Montana
Re: Lawn mower build update ( video added )
Trump 2024
All responses have been cleared by the law firm of "Elmer and Fudd."
All responses have been cleared by the law firm of "Elmer and Fudd."
Re: Lawn mower build update ( video added )
That'll work just as good, buddy!
"Oh bother", said Pooh, as he chambered another round.
-
- Advanced Levergunner
- Posts: 9000
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Lawn mower build update ( video added )
Boy, Lenn, if you ever gave a small engine class for dummies, I might have to drive to Minnesoty ...
Re: Lawn mower build update ( video added )
Years ago, my Dad made a sickle mower. He put a frame together and made it front wheel drive with a rear engine mount. It was 3 speed with reverse, and it used a belt drive with a foot pedal tensioner to make it go. He had a lever system with ratcheting teeth to raise or lower the sickle head. It worked pretty good on pigweed and ragweed. I wish I had a picture of it. He put a used engine on it and fabricated the frame himself.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: Lawn mower build update ( video added )
I can’t tell from the picture but was it there to hold a breather filter down? You probably know that lauson turned into Tecumseh
Re: Lawn mower build update ( video added )
Thanks everyone and thanks for the link Harry, if ya have a 1994 issue look up two articles of my hot air engine builds.
I read the whole write up on the lauson engines but still in the dark about what that thing is.
Maybe i`ll figure it out if i get it running.
I read the whole write up on the lauson engines but still in the dark about what that thing is.
Maybe i`ll figure it out if i get it running.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- GunnyMack
- Advanced Levergunner
- Posts: 10133
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Lawn mower build update ( video added )
I think you are on track with it being a breather. With the top of it missing might explain why its seized up...
BROWN LABS MATTER !!
Re: Lawn mower build update ( video added )
Could be Gunny, well we got the flywheel off and the valve cover and its pretty cruddy.
Here`s a trick i learned for freeing pistons, ya put some brake fluid in the cylinder and place a little piece of rag on the piston that works as a wick.
It will burn slow and heat the cylinder and piston and hopefully let the brake fluid seep down into the rings.
Here`s a trick i learned for freeing pistons, ya put some brake fluid in the cylinder and place a little piece of rag on the piston that works as a wick.
It will burn slow and heat the cylinder and piston and hopefully let the brake fluid seep down into the rings.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Senior Levergunner
- Posts: 1406
- Joined: Mon Jul 28, 2008 8:33 pm
- Location: West central Montana
Re: Lawn mower build update ( video added )
By looking at this picture I would say it’s a crankcase vent
https://www.google.com/search?q=1950%E2 ... Gzo0Ts0p7M
https://www.google.com/search?q=1950%E2 ... Gzo0Ts0p7M
Trump 2024
All responses have been cleared by the law firm of "Elmer and Fudd."
All responses have been cleared by the law firm of "Elmer and Fudd."
Re: Lawn mower build update ( video added )
That rag and breakfluid burning trick sounds better than using a torch. Probably less heat and it is spread out.
Dad had an old Tecumseh lawn mower when I still lived there. That motor had more power and would wrap up tighter than any other small engine I ever used. I never saw grass thick enough to bog it down. It used to throw the clippings 30 to 40 feet.
Dad had an old Tecumseh lawn mower when I still lived there. That motor had more power and would wrap up tighter than any other small engine I ever used. I never saw grass thick enough to bog it down. It used to throw the clippings 30 to 40 feet.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: Lawn mower build update ( video added )
Yep i think we are right about the vent, there`s a spring in the bottom and probably a ball.
I tried pounding on the piston with a block of wood but movement, i fear the inside of the crank case is rusty too plus the valve s are stuck.
I`m going to fill it up with fuel oil using that vent and let it sit for a few days and try again.
piller that sounds like a strong engine you had.
I tried pounding on the piston with a block of wood but movement, i fear the inside of the crank case is rusty too plus the valve s are stuck.
I`m going to fill it up with fuel oil using that vent and let it sit for a few days and try again.
piller that sounds like a strong engine you had.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
It was the strongest engine on a push mower that I have ever seen. When you shoved the throttle forward it would make the front right wheel come up about an inch.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: Lawn mower build update ( video added )
Here`s a better look at the vent valve.
Appears to be a fiber washer with a ball behind then spring.
Appears to be a fiber washer with a ball behind then spring.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Check valve for crankcase breather.
Re: Lawn mower build update ( video added )
Yepper.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Got some movement on the crankshaft this morn but the piston didn`t move, the piston is all the way down which isn`t great for pounding on the piston.
I may drain the fuel oil out and try heating up the cylinder next.
I may drain the fuel oil out and try heating up the cylinder next.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Heat is probably a good plan. Best of luck, Pitchy.
"Oh bother", said Pooh, as he chambered another round.
Re: Lawn mower build update ( video added )
You may look into evapo rust it is a good product that actually works.
Re: Lawn mower build update ( video added )
I got some of that at Harbor Freight, and it worked well.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: Lawn mower build update ( video added )
Its a total loss, we removed the engine and broke it down and inside is total rust the oil pump is rusted solid and not salvageable.
God the rest of the machine freed up nice sickle moving ect...
The shaft height and bolt spacing looks the same as the preditor motor so i might look into put a 1 1/2 hp one of those on it.
It`s what it is disappointing but thats what happens when people leave stuff sitting outside.
The belt pulleys will be here tomorrow for the reel mower build so back to that for a while.
God the rest of the machine freed up nice sickle moving ect...
The shaft height and bolt spacing looks the same as the preditor motor so i might look into put a 1 1/2 hp one of those on it.
It`s what it is disappointing but thats what happens when people leave stuff sitting outside.
The belt pulleys will be here tomorrow for the reel mower build so back to that for a while.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- AJMD429
- Posting leader...
- Posts: 32139
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Lawn mower build update ( video added )
I have been a 'BCS' guy for 30 years.
Way better than the other products out there.
https://youtu.be/gKJygd-zf4U
Way better than the other products out there.
https://youtu.be/gKJygd-zf4U
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Lawn mower build update ( video added )
That’s too bad but like you say you can leave stuff sit out and expect much later. I have an old Briggs 8 cubic inch gear reduction motor from a planet junior about the same way.
That BCS stuff is nice but you need very deep pockets to own it.
That BCS stuff is nice but you need very deep pockets to own it.
Re: Lawn mower build update ( video added )
Thanks Marvin, yea this thing was so original it would of been real nice.
Have to keep my eye open for a running motor, they put a specific crankshaft in it also with a tapered shaft, the gear in the reduction unit has a tapered hole in it.
I think a straight shaft would work as i could turn the hole to fit a straight shaft and everything else looks to be the same as far as a predator bolt up but then it isn`t original.
So for now back to the reel build and get it running right.
I only paid 50 bucks for the zipper so not out much.
Have to keep my eye open for a running motor, they put a specific crankshaft in it also with a tapered shaft, the gear in the reduction unit has a tapered hole in it.
I think a straight shaft would work as i could turn the hole to fit a straight shaft and everything else looks to be the same as far as a predator bolt up but then it isn`t original.
So for now back to the reel build and get it running right.
I only paid 50 bucks for the zipper so not out much.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
- GunnyMack
- Advanced Levergunner
- Posts: 10133
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Lawn mower build update ( video added )
Aw that's a shame it's a loss! Always great to see old machines operating.
BROWN LABS MATTER !!
-
- Advanced Levergunner
- Posts: 9000
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Lawn mower build update ( video added )
Lenn, have you checked over at Smokstak.com? Hope you can find another Lauson.
Re: Lawn mower build update ( video added )
I checked there but didn`t see any.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Caitlyn Jenner almost died when he ran out of tranny fluid.
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: Lawn mower build update ( video added )
I don`t give in easy, went out and took it all apart again and got the piston loose and the valves.
Sprayed it all down with oven cleaner for the night, the pump i`m not sure can be saved as it layed in the bottom in the water.
Wonder why it wasn`t a slash system maybe it will be.
Sprayed it all down with oven cleaner for the night, the pump i`m not sure can be saved as it layed in the bottom in the water.
Wonder why it wasn`t a slash system maybe it will be.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
This morn while waiting on pulleys we got the engine spinning free and cleaned out, i don`t see the purpose of the oil pump they had in it which is repairable so i removed it.
There`s a dipper on the connecting rod so i think that will do the job, the oil pump didn`t have any lones on it so it most of just squirted oil straight up.
The issue now is freeing up the governor the collar is froze on the shaft so soaking and heating , if we get that loose its put it back together and clean the carb and hope it runs.
There`s a dipper on the connecting rod so i think that will do the job, the oil pump didn`t have any lones on it so it most of just squirted oil straight up.
The issue now is freeing up the governor the collar is froze on the shaft so soaking and heating , if we get that loose its put it back together and clean the carb and hope it runs.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Advanced Levergunner
- Posts: 9000
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Lawn mower build update ( video added )
Good luck Lenn! If anyone can revive a fallen engine, it is you!
Re: Lawn mower build update ( video added )
Sounds as if it is going your way.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Lawn mower build update ( video added )
Here is where I'd use a points eliminator but these look pretty good so? Give me the specs on your rings and I might have set. I need the bore diameter and the thickness of each ring if you want to go to that much trouble. Worked on an old Ithica 37 pump this morning and it shoots and shucks now.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
Re: Lawn mower build update ( video added )
Thanks fellers, got it on the bench and runs if i put gas in the spark plug hole, i think a valve is leaking hardly no compression.
I`ll pull the head tomorrow and check it out, i know when i was pulling it over before with my hand over the cylinder it would suck my hand down good then wouldn`t.
Thanks Ron let me fiddle a little more first and cool beans with your gun.
I`ll pull the head tomorrow and check it out, i know when i was pulling it over before with my hand over the cylinder it would suck my hand down good then wouldn`t.
Thanks Ron let me fiddle a little more first and cool beans with your gun.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
In the mean time we got the belt drive on the reel mower, have to tinker a little yet but works good.
I can`t believe how fast it is even at a idle, of coarse if i had a flat lawn where ya could go straight longer it would be better my yard looks more like a motocross track.
I didn`t have a belt the right length so i wired one together for the test run and thats what`s making the clunk noise as it goes over the tensioner roller.
Video.
https://www.youtube.com/watch?v=4YeN6YAn0Tc
I can`t believe how fast it is even at a idle, of coarse if i had a flat lawn where ya could go straight longer it would be better my yard looks more like a motocross track.
I didn`t have a belt the right length so i wired one together for the test run and thats what`s making the clunk noise as it goes over the tensioner roller.
Video.
https://www.youtube.com/watch?v=4YeN6YAn0Tc
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Lawn mower build update ( video added )
Now THAT works brother! "I love it when a good plan comes together."
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
Re: Lawn mower build update ( video added )
Man, you have been busy.
Re: Lawn mower build update ( video added )
Thanks guys, belt tensioners are kind of a pain too ya can have it like in the picture or ya can lift the belt on the top.
The benefit of the top way is ya can put a stop on the tensioner so it only lowers the belt so far that keeps the belt from dropping on the pulley and causing creep.
Issue here is the motor and jack shaft are so close together.
The benefit of the top way is ya can put a stop on the tensioner so it only lowers the belt so far that keeps the belt from dropping on the pulley and causing creep.
Issue here is the motor and jack shaft are so close together.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Nice work buddy.
Mowing in style.
Mowing in style.
"Oh bother", said Pooh, as he chambered another round.
-
- Advanced Levergunner
- Posts: 9000
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Lawn mower build update ( video added )
Love to see a natural-born engineer at work! Lenn, that Predator has a pretty nice note. I hear a lot of good things about these affordable engines.
Re: Lawn mower build update ( video added )
Thanks fellers, got the Lauson running now to put it on the sickle mower.
Video.
https://www.youtube.com/watch?v=y4wDFXxIau4
Video.
https://www.youtube.com/watch?v=y4wDFXxIau4
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Well i`ll be darn, plugging up bad in that garbage i was trying it in but she`s a going but have to get a belt for the self propelled.
https://www.youtube.com/watch?v=XPhfgz3rJhU
https://www.youtube.com/watch?v=zQ1LpPHDTmk
https://www.youtube.com/watch?v=XPhfgz3rJhU
https://www.youtube.com/watch?v=zQ1LpPHDTmk
Last edited by Pitchy on Tue Aug 27, 2019 12:49 pm, edited 1 time in total.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
Couldn't see the second video.
Great job on that motor, Lenn. Sounds good.
Great job on that motor, Lenn. Sounds good.
"Oh bother", said Pooh, as he chambered another round.
Re: Lawn mower build update ( video added )
Thanks Jay, something going on with utube i couldn`t see the first one at first but then it showed up so check it again after while and let me know.
Last edited by Pitchy on Tue Aug 27, 2019 1:13 pm, edited 1 time in total.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
Re: Lawn mower build update ( video added )
I will buddy.
"Oh bother", said Pooh, as he chambered another round.
- GunnyMack
- Advanced Levergunner
- Posts: 10133
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Lawn mower build update ( video added )
ITS ALIVE! Glad you could save that engine. Both video clips worked for me.
Now that you have all these lawn care machines are you going to put in a golf course?
Now that you have all these lawn care machines are you going to put in a golf course?
BROWN LABS MATTER !!
Re: Lawn mower build update ( video added )
Thanks Gunny, ha golf coarse i don`t think that`s me.
Because I Can, and Have
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.
-------------------------------------------------------------
USAF-72-76
God Bless America.
Disclaimer, not responsible for anyone copying or building anything i make.
Always consult an expert first.