S&W 629-6 Deluxe 45 Colt Conversion
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Scrateshooter
- Levergunner
- Posts: 48
- Joined: Mon Jul 28, 2008 6:40 pm
- Location: Northeast Texas
S&W 629-6 Deluxe 45 Colt Conversion
I had Jack Huntington convert a LNIB S&W 629-6 Deluxe from 44 Magnum to 45 Colt, the conversion took nine months from drop off to pick up from my FFL.
Now I need a matching S&W 629-6 Deluxe in 44 Magnum.
I took it out and put 58 rounds of my preferred 45 Colt loads (8.5gr Unique) though it and it was sighted spot on for turtle eradication work. Jack Huntington did a good job cutting the cylinders for lead loads. There was no sign of leading with the loads used (though my S&W 25-13 & 25-15 don't lead either) compared to my newer S&W 629-6.
Since it was LNIB it needs to be broke in like the 10 shot 617 I bought new recently.
So far I don't plan on trying to blow it up since these grips aren't the most comfortable for stout loads.
I just turned 40, so that's the last of us; I don't reckon many millennials and hipsters will be requesting 45 Colt revolvers nor reloading for them.
"Blessed is he that readeth, and they that hear the words of this prophecy, and keep those things which are written therein: for the time is at hand." Revelation 1:3
- Sixgun
- Posting leader...
- Posts: 19114
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: S&W 629-6 Deluxe 45 Colt Conversion
I like that! Reading your story made me visualize an old head revolver/cast bullet guy like me. 40 y.o.? Surprised the hell out of me...didn't think any youngsters even knew what a 45 L. Colt was, let alone a revolver.
Was there a barrel change or a rebore/rerifle? What are the throats?
Looks like a quality job and you certainly know your 45 L. Colt loads...8-9 gr. of Unique with a 260 Keith has served me well for over 40 years...or longer than you've been alive.
Only had one modern 45 L. Colt D.A, a 'Smith 25-2 wth .457 throats...j-u-n-k......dozens of single actions....My current d.a.'s in 45 L.Colt are 1878 and New Sevice Colts like the one in the avatar.----6
Was there a barrel change or a rebore/rerifle? What are the throats?
Looks like a quality job and you certainly know your 45 L. Colt loads...8-9 gr. of Unique with a 260 Keith has served me well for over 40 years...or longer than you've been alive.
Only had one modern 45 L. Colt D.A, a 'Smith 25-2 wth .457 throats...j-u-n-k......dozens of single actions....My current d.a.'s in 45 L.Colt are 1878 and New Sevice Colts like the one in the avatar.----6
-
- Senior Levergunner
- Posts: 1000
- Joined: Sat Sep 08, 2007 4:02 pm
- Location: WY
Re: S&W 629-6 Deluxe 45 Colt Conversion
Right on! That's about the only way to get one that shoots good without fussing with. Neither Ruger nor S&W has ever figured out the 45Colt; one makes the throats too small and the other makes them too large. Very frustrating.
- Scrateshooter
- Levergunner
- Posts: 48
- Joined: Mon Jul 28, 2008 6:40 pm
- Location: Northeast Texas
Re: S&W 629-6 Deluxe 45 Colt Conversion
The barrel was removed and sent off to re-bore (that's what took so long). I'm not sure what the throats are cut at, but I remember Jack discussing it and they are cut so I don't get any leading like some other revolvers I've dealt with.
"Blessed is he that readeth, and they that hear the words of this prophecy, and keep those things which are written therein: for the time is at hand." Revelation 1:3
Re: S&W 629-6 Deluxe 45 Colt Conversion
Looks like they did good work for you. Congratulations.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- Old Savage
- Posting leader...
- Posts: 16785
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: S&W 629-6 Deluxe 45 Colt Conversion
Nice. Jack does great work. Know him well. He also does custom single actions with the cylinders bored through the frame. I shot one in 50.Special he did when ge was here in Lancaster.
Re: S&W 629-6 Deluxe 45 Colt Conversion
Nice! A clean bit of work.
"Oh bother", said Pooh, as he chambered another round.
Re: S&W 629-6 Deluxe 45 Colt Conversion
The .45 Colt with Keith style bullets doesn't need to be hot-rodded to be effective.
I like my Ruger Blackhawk with the 2 cylinders. The .45 ACP cylinder is as accurate as anything I have ever fired, and the .45 Colt cylinder is no slouch. We all have our preferences.
I hope your 629 is all you could ever ask it to be.
I like my Ruger Blackhawk with the 2 cylinders. The .45 ACP cylinder is as accurate as anything I have ever fired, and the .45 Colt cylinder is no slouch. We all have our preferences.
I hope your 629 is all you could ever ask it to be.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
- J Miller
- Member Emeritus
- Posts: 14889
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: S&W 629-6 Deluxe 45 Colt Conversion
Today's young folks don't know anything that doesn't come out of a smart phone. If suddenly they all quit working there would be mobs of stupefied idjits milling around in glassy eyed panic.Sixgun wrote: ↑Sat Jul 13, 2019 9:08 pm I like that! Reading your story made me visualize an old head revolver/cast bullet guy like me. 40 y.o.? Surprised the hell out of me...didn't think any youngsters even knew what a 45 L. Colt was, let alone a revolver.
Was there a barrel change or a rebore/rerifle? What are the throats?
Looks like a quality job and you certainly know your 45 L. Colt loads...8-9 gr. of Unique with a 260 Keith has served me well for over 40 years...or longer than you've been alive.
Only had one modern 45 L. Colt D.A, a 'Smith 25-2 wth .457 throats...j-u-n-k......dozens of single actions....My current d.a.'s in 45 L.Colt are 1878 and New Sevice Colts like the one in the avatar.----6
Back in the 70's I picked up a Lyman 454424 mold and started casting serious .45 Colt bullets. With wheel weights they came out at 268 grs. Those bullets over 9.0 Unique has been my go-to load for my .45 Colt revolvers and rifles since then.
My 1981-ish S&W 25-2 also has the .457 throats. WORST shooting revolver I own. I keep it only cos I keep hoping to find a later cylinder with smaller throats. I guess I'm stubborn.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- J Miller
- Member Emeritus
- Posts: 14889
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: S&W 629-6 Deluxe 45 Colt Conversion
The cylinders with oversized throats have to be replaced. Those like Ruger's undersized ones can be reamed to .4525 and will shoot great.Leverluver wrote: ↑Sat Jul 13, 2019 10:07 pm Right on! That's about the only way to get one that shoots good without fussing with. Neither Ruger nor S&W has ever figured out the 45Colt; one makes the throats too small and the other makes them too large. Very frustrating.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- J Miller
- Member Emeritus
- Posts: 14889
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: S&W 629-6 Deluxe 45 Colt Conversion
Scrateshooter,Scrateshooter wrote: ↑Sat Jul 13, 2019 7:22 pm
I had Jack Huntington convert a LNIB S&W 629-6 Deluxe from 44 Magnum to 45 Colt, the conversion took nine months from drop off to pick up from my FFL.
Now I need a matching S&W 629-6 Deluxe in 44 Magnum.
I took it out and put 58 rounds of my preferred 45 Colt loads (8.5gr Unique) though it and it was sighted spot on for turtle eradication work. Jack Huntington did a good job cutting the cylinders for lead loads. There was no sign of leading with the loads used (though my S&W 25-13 & 25-15 don't lead either) compared to my newer S&W 629-6.
Since it was LNIB it needs to be broke in like the 10 shot 617 I bought new recently.
So far I don't plan on trying to blow it up since these grips aren't the most comfortable for stout loads.
I just turned 40, so that's the last of us; I don't reckon many millennials and hipsters will be requesting 45 Colt revolvers nor reloading for them.
Nice pistol. That idea I could get along with just fine.
Millennials don't know anything that isn't beamed into their heads by the electronic brain washing smart phones.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
-
- Levergunner 2.0
- Posts: 155
- Joined: Sat Nov 20, 2010 12:02 pm
- Location: NW Ohio
Re: S&W 629-6 Deluxe 45 Colt Conversion
That is nice!
Now I have to forget this post before I decide I need one
Now I have to forget this post before I decide I need one
I am one gun away from happy
- J Miller
- Member Emeritus
- Posts: 14889
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: S&W 629-6 Deluxe 45 Colt Conversion
That which has been seen cannot be unseen.Hairtrigger wrote: ↑Sun Jul 14, 2019 8:24 am That is nice!
Now I have to forget this post before I decide I need one
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
- Scrateshooter
- Levergunner
- Posts: 48
- Joined: Mon Jul 28, 2008 6:40 pm
- Location: Northeast Texas
Re: S&W 629-6 Deluxe 45 Colt Conversion
By the time I got this one in my hands I decided I did not need it and I could make due by loading 45 ACP up to 45 autorim specs and shoot deer/hog with it.Hairtrigger wrote: ↑Sun Jul 14, 2019 8:24 am That is nice!
Now I have to forget this post before I decide I need one
Your wants and needs can change a bit over nine months. I still want a Mustang Bullitt in Highland Green.
This may be the last conversion for me.
"Blessed is he that readeth, and they that hear the words of this prophecy, and keep those things which are written therein: for the time is at hand." Revelation 1:3
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: S&W 629-6 Deluxe 45 Colt Conversion
Wow, gorgeous gun and its nice it is marked .45 Colt..... Tidd/3leg
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
- Ysabel Kid
- Moderator
- Posts: 28113
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: S&W 629-6 Deluxe 45 Colt Conversion
That is a sweet looking gun!
Sixgun, Y2K just turned 21 in May. One of his favorite rounds is the .45 Colt. There is hope yet!
Sixgun, Y2K just turned 21 in May. One of his favorite rounds is the .45 Colt. There is hope yet!