Lead hardness testers
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 9013
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Lead hardness testers
Except for a small batch of 20:1 alloy and some pure lead wire I have purchased over the years, I have been content to cast boolits using a little of everything and a lot of range scrap mostly casting handgun slugs for 25-yard work. I'd like to step up my game and be better informed about the general hardness of the bullets I cast and shoot, so I am looking at lead hardness testers.
The cheapest appears to be a set of art pencils of varying hardness -- if the pencil scrapes up a small shaving of lead, the pencil is harder than the lead. Lots about this at castboolits.com.
I'd prefer something more sophisticated and less fiddly. The interesting Lee tester is next up at just over $60, followed by the old workhorse LBT at $100, the Cabine Tree at $125 and the Saeco at $189.
Leaning toward the LBT but saw a good Youtube on how read the Lee properly.
Who has used these or has thoughts? JimT, I know you have Veral's tester by your recent posts.
The cheapest appears to be a set of art pencils of varying hardness -- if the pencil scrapes up a small shaving of lead, the pencil is harder than the lead. Lots about this at castboolits.com.
I'd prefer something more sophisticated and less fiddly. The interesting Lee tester is next up at just over $60, followed by the old workhorse LBT at $100, the Cabine Tree at $125 and the Saeco at $189.
Leaning toward the LBT but saw a good Youtube on how read the Lee properly.
Who has used these or has thoughts? JimT, I know you have Veral's tester by your recent posts.
Re: Lead hardness testers
Yes, I have the LBT. I am not sure how old it is but it is simple, strong and will last .. I can attest to that. I think I have had it since the 1980's, but it could have been in the 90's.
Re: Lead hardness testers
I use the LEE tester and it seems to work fine but I have nothing to compare it with other than a portable Rockwell tester that works in the same manner except it just does C scale.
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Lead hardness testers
I have a Saeco hardness tester. I mostly use it to compare batches of alloy of unknown mix. It works well but no way to check accuracy or calibration.
-
- Senior Levergunner
- Posts: 1048
- Joined: Wed Jan 28, 2009 9:12 pm
- Location: Bushwhacker Capitol, Missouri
Re: Lead hardness testers
I use an automatic center punch to give me a clue about the relative hardness of my scrap lead. Not that it matters, I melt and cast everything.
-
- Advanced Levergunner
- Posts: 2053
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: Lead hardness testers
My LBT is probably 30 years old by now. Always works and easy to use.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
- Sixgun
- Posting leader...
- Posts: 18690
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Lead hardness testers
Saeco......very accurate from pure lead to the hardest of alloys----6
- Griff
- Posting leader...
- Posts: 20853
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Lead hardness testers
Likewise, simple and works... what's not to like?
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Lead hardness testers
I used to use a friends Saeco and liked it quite well . But he left us a few years ago and his heirs did who knows what with it .
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
- Shasta
- Senior Levergunner
- Posts: 1558
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: Lead hardness testers
When it comes to precision measuring instruments, don't cheap out. You get what you pay for. I really like my Saeco. It's a very old one made of steel. The one drawback to it is that it will only test bullets, not scrap lead pieces or ingots. For those I have a Cabine Tree hardness tester. For me, the Saeco is easiest to use.
Shasta
Shasta
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
Re: Lead hardness testers
I have a Lee tester, but had quite a bit of hassle with the microscope. I have a magnifying visor and dial calipers, so I just measured the dimple with my calipers. It's not difficult to "frame" the dimple with the calipers and the visor enlarges enough to get good measurements. There are many ways to mount the microscope (I used a 45 ACP taper crimp die to hold the 'scope and mounted it in my single stage press) but I prefer to just measure the dimple with my calipers. Works for me...
Mike
Vocatus atque non vocatus, Deus aderit...
I've learned how to stand on my own two knees...
Vocatus atque non vocatus, Deus aderit...
I've learned how to stand on my own two knees...