Hi all.
In the 1970's and 80's Winchester used some sort of reddish lacquer for their stocks, see example below. Does anyone here know how to reproduce this factory finish?
Thanks,
Michael
Winchester stock lacquer
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- GunnyMack
- Advanced Levergunner
- Posts: 10612
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Winchester stock lacquer
I think Brownells had a Winchester red stain that reproduced the color quite well.
BROWN LABS MATTER !!
-
- Advanced Levergunner
- Posts: 4761
- Joined: Fri Sep 07, 2007 5:00 am
- Location: North Coast of America-Ohio
Re: Winchester stock lacquer
I re-member Seeing this some years ago, had to do a search for it.https://www.ebay.com/itm/Winchester-Res ... xy4RpRyviy
Re: Winchester stock lacquer
I feel certain the formula for the finish you want is contained in Howe's "the Modern Gunsmith". Frankly just about everything you need to know about anything applicable to a firearm design existing pre WW2 is probably covered in here.
https://newbooksinpolitics.com/politica ... -gunsmith/
Wm
https://newbooksinpolitics.com/politica ... -gunsmith/
Wm
Re: Winchester stock lacquer
Galazan/CT Shotgun also sells a reddish Winchester stain too, I believe.
Old No7
Edit to add:
Here's the link to it... (click here)
Old No7
Edit to add:
Here's the link to it... (click here)
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Re: Winchester stock lacquer
.
The Winchester tone/color can be reproduced via mixing stains...……………………………
I use 75% Black Walnut + 25% Red Mahogany Minwax stains (which mixture passed muster with several different Winchester collectors) - although, if you want to experiment, two different brown stains can be mixed with any of the three other red stains to reach the desired color.
I experimented by staining 3" wide sections of a 3/4"x3"x36" walnut board, I bought at a hobby shop, with the various different stain mixtures for a side-by-side comparison.
https://www.minwax.com/wood-products/st ... lor-guide/
.
The Winchester tone/color can be reproduced via mixing stains...……………………………
I use 75% Black Walnut + 25% Red Mahogany Minwax stains (which mixture passed muster with several different Winchester collectors) - although, if you want to experiment, two different brown stains can be mixed with any of the three other red stains to reach the desired color.
I experimented by staining 3" wide sections of a 3/4"x3"x36" walnut board, I bought at a hobby shop, with the various different stain mixtures for a side-by-side comparison.
https://www.minwax.com/wood-products/st ... lor-guide/
.
- marlinman93
- Advanced Levergunner
- Posts: 6594
- Joined: Sun Apr 01, 2007 3:40 pm
- Location: Oregon
Re: Winchester stock lacquer
Used to be a couple guys in Idaho who sold Tapadera's Winchester Red finish, and it was perfect! It could be used directly on the wood, but also diluted into your finish. I found it too concentrated as is, and put a few drops into my Wipe On Poly to get the correct red tone.
Unfortunately I ran out, and when I tried to order more a year ago I could no longer find their web site. Seems maybe they passed away, and nobody took up the torch.
Unfortunately I ran out, and when I tried to order more a year ago I could no longer find their web site. Seems maybe they passed away, and nobody took up the torch.
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
http://members.tripod.com/~OregonArmsCollectors/
Re: Winchester stock lacquer
This is exactly what I used on my Trail’s End rifle when I had to refinish the stock after correcting for the recessed tang at the top of the wrist. Worked perfectly.Pete44ru wrote: ↑Sat Feb 09, 2019 8:24 pm .
The Winchester tone/color can be reproduced via mixing stains...……………………………
I use 75% Black Walnut + 25% Red Mahogany Minwax stains (which mixture passed muster with several different Winchester collectors) - although, if you want to experiment, two different brown stains can be mixed with any of the three other red stains to reach the desired color.
I experimented by staining 3" wide sections of a 3/4"x3"x36" walnut board, I bought at a hobby shop, with the various different stain mixtures for a side-by-side comparison.
https://www.minwax.com/wood-products/st ... lor-guide/
.
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: Winchester stock lacquer
Brownels French red stain followed by True oil or your favorite clear finish gets you darn close.