Pre 64 model 94 receiver screw identification

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Jim-Curlee
Levergunner
Posts: 11
Joined: Wed Oct 10, 2018 9:29 pm

Pre 64 model 94 receiver screw identification

Post by Jim-Curlee »

I have a pre 64 model 94.
There are 5 screws on the left hand side of the receiver.
I need the big one on the top, at the front.
Twice now I’ve ordered screws from Numrich Arms, and still don’t have the right screw.
So before I blow it for the third time, I figured I better get some help.
Does anyone know what that screw is called.
If someone has an original screw they would want to sell, I’d be happy to buy one.
I still want to know what it’s called. lol

Thanks
Jim
Top
User avatar
gamekeeper
Spambot Zapper
Posts: 17376
Joined: Thu Sep 06, 2007 3:32 pm
Location: Over the pond unfortunately.

Re: Pre 64 model 94 receiver screw identification

Post by gamekeeper »

Welcome to the fire Jim, someone more knowledgeable than me will be along shortly.... :)
If more men loved and cherished their wives as much as I love bacon the world would be a much better place.
Top
User avatar
J Miller
Member Emeritus
Posts: 14881
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Pre 64 model 94 receiver screw identification

Post by J Miller »

Hmmmm, I once did a post on how to tell the pre from post 64 94s apart. It used to be on our home page but now I can't find it.

anyway, I found this site, it might help:
http://homesteadparts.com/shopcart/comm ... 72314.1802
and this page \:
http://homesteadparts.com/shopcart/cart ... ceiver.jpg

"Finger lever pin stop screw" is the screw you want. There is two versions, the pre-64 and the larger post-64.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Top
Pisgah
Senior Levergunner
Posts: 1797
Joined: Thu Sep 06, 2007 9:01 pm
Location: SC

Re: Pre 64 model 94 receiver screw identification

Post by Pisgah »

Finger lever pin stop screw is the name. What it does is self-evident.
Top
Jim-Curlee
Levergunner
Posts: 11
Joined: Wed Oct 10, 2018 9:29 pm

Re: Pre 64 model 94 receiver screw identification

Post by Jim-Curlee »

The finger lever pin stop screw, is the part I ordered.
They sent me a link pin stop screw.
They are similar in appearance, but the size is way different.
Have the correct part on the way.
I was thinkin the previous owner may have bored the hole out for the scope mount, but the FLPSS from my 48 fit in the hole, so I knew it wasn't me. whew
Thanks again
Jim
Top
User avatar
J Miller
Member Emeritus
Posts: 14881
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Pre 64 model 94 receiver screw identification

Post by J Miller »

Jim,

Sometimes parts pickers just reach in the box and pull out whatever is there without having any idea what they should be pulling out. Call 'em back and tell 'em you're returning the wrong screw and want the right one or a complete refund.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Top
Jim-Curlee
Levergunner
Posts: 11
Joined: Wed Oct 10, 2018 9:29 pm

Re: Pre 64 model 94 receiver screw identification

Post by Jim-Curlee »

They have the right one coming as we speak, no charge.
Jim
Top
Post Reply

Return to “General Discussion”