PAY IT FORWARD

65 in 25-20 · Post by **65 in 25-20** » Thu May 01, 2008 8:43 pm

Thanks Hagler, my picture posting-fu was weak. I finally figured it out though, been a long time since I've posted any pics on the web.

Wes · Post by **Wes** » Fri May 02, 2008 10:16 am

Been digging around in closets and found:

1 pair silver Weaver 1" low rings (mounted once, good shape)

1 box approx 450 38 cal double end wadcutters 148 grain (sold my 38)

Mokwaw · Post by **Mokwaw** » Fri May 02, 2008 6:31 pm

azoil........the calculator arrived today.....thank you.

azoil · Post by **azoil** » Fri May 02, 2008 6:33 pm

Mokwaw wrote:azoil........the calculator arrived today.....thank you.

Your very welcome. Hope it works out for your daughter.

budliteguy · Post by **budliteguy** » Fri May 02, 2008 11:54 pm

Azoil
Recoil pad came in today fit the old wooden stock I fitted to a stevens 124 shotgun I picked up. Not much to look at, but it shoots.
I still have the CEMTE 20 rounds mags if anyone wants them.
blazer88@inbox.com

Tycer · Post by **Tycer** » Sat May 03, 2008 12:02 am

I can use the 38 wadcutters.

bsaride · Post by **bsaride** » Sat May 03, 2008 4:09 pm

OK,

I have some time today so will post this. I won't be able to ship anything until next Thursday, May 7th.

1. Ohaus Balance Scale.

2. Ohaus 10-10 Scale. GONE

3. RCBS 10-10 Scale. GONE

4. Two empty Die boxes. GONE

5. RCBS 7mm Rem Mag Full length die set no. 13641. GONE

6. RCBS 7mm Rem Mag Full length die set no. 13601. GONE

7. RCBS 44 Spec 3 die set. GONE

8. Lyman 222 Rem Neck sizer, RCBS 222 R MG FL, Lyman M S - 3A, Verier seater.

9. RCBS 9mm Luger 3 die set. GONE

10. RCBS 9mm Luger 3 die set. GONE

11. E-Bair 243 Win seater, sizer, Forester piece (not sure what it is).

12. Pacific 30-06 2 die set (needs cleaning). GONE

levers · Post by **levers** » Sat May 03, 2008 4:12 pm

If they're still available, I'll say dibs on the RCBS 10-10 and 30'06 dies.

Let me know and I'll get my items listed!

bsaride · Post by **bsaride** » Sat May 03, 2008 4:17 pm

levers wrote:If they're still available, I'll say dibs on the RCBS 10-10 and 30'06 dies.

Let me know and I'll get my items listed!

Dang, let me catch my breath from posting first

Set aside for levers.

Jay

levers · Post by **levers** » Sat May 03, 2008 4:27 pm

Thanks Jay. Here are a couple items

1. Lee Loader for the 308. GONE

2. Leather holster with a light pencil mark "S&W K Masterpiece" on the back side of the holster. It's been used some but it looks like it still has quite a few more miles in it. GONE

Yance · Post by **Yance** » Sat May 03, 2008 6:28 pm

I'd like to call dibs on the Ohaus 10-10 scale.
This will be for a beginning reloader.
Can't creat too many "monsters", right Ty?

I'll have a couple of items up early in the coming week.
Thanks

bsaride · Post by **bsaride** » Sat May 03, 2008 6:35 pm

Yance wrote:I'd like to call dibs on the Ohaus 10-10 scale.
This will be for a beginning reloader.
Can't creat too many "monsters", right Ty?
I'll have a couple of items up early in the coming week.
Thanks

Done.

azoil · Post by **azoil** » Sat May 03, 2008 6:48 pm

bsaride,

I could use the #9) 9mm and #7) 44 Special dies if they aren't spoken for. I'll send you a PM.
Dave

bsaride · Post by **bsaride** » Sat May 03, 2008 7:15 pm

azoil wrote:bsaride,

I could use the #9) 9mm and #7) 44 Special dies if they aren't spoken for. I'll send you a PM.
Dave

Done

Yance · Post by **Yance** » Sat May 03, 2008 8:25 pm

OK, up for grabs is an "experienced" Safariland "upside down" shoulder holster stamped S&W 19. Since my J frames fall out I'm assuming this holster is for a 2" barreled K frame. Too bad I traded off my LNIB M-12 Smith. (Gone to budliteguy)

Next is a great vinatge Luger American Corp Model 80 powder measure with stand. (Gone to levers)

Have no idea how small a charge of Bullseye this will throw but it'll be almost nothing. MAX is 77 gr of IMR 3031. (That's just what I happened to check it with)

levers · Post by **levers** » Sat May 03, 2008 9:05 pm

Hi Yance
I could definitely use the powder measure so I'll call dids if it's still available.

Thanks

Yance · Post by **Yance** » Sat May 03, 2008 9:53 pm

You've got it levers.

PM me an address and I'll try to get it out Monday.

65 in 25-20 · Post by **65 in 25-20** » Sat May 03, 2008 10:21 pm

Mokwaw wrote:65 in 25-20 AND TomF

......packages went out today USPS..............

Mag arrived today. Thanks again!!

levers · Post by **levers** » Sat May 03, 2008 10:21 pm

I'll offer up a Pro Line bow sight and mechanical wrist release. Used but in decent shape. The Pro Line has 6 pins. I think I had it mounted on a PSE Mach Flight 4. GONE

bsaride · Post by **bsaride** » Sat May 03, 2008 10:28 pm

levers wrote:I'll offer up a Pro Line bow sight and mechanical wrist release. Used but in decent shape. The Pro Line has 6 pins. I think I had it mounted on a PSE Mach Flight 4.

Aint no sights on my bows.

Any gloves, armguards, quivers layin around out there?

If'n it said Pearson on it somewhere that would earn
extra brownie points (I bought up about 10 Pearson
takedown bows from the late 50s last year 25-65 Lbs).

levers · Post by **levers** » Sat May 03, 2008 10:30 pm

I've got a glove I used to use (I think it's a golf glove) and an arm guard that's pretty well used but you're welcome to them

These are on their way to BSARIDE

bsaride · Post by **bsaride** » Sat May 03, 2008 10:36 pm

levers wrote:I've got a glove I used to use (I think it's a golf glove) and an arm guard that's pretty well used but you're welcome to them

Cool, PM comming your way.

oldmax · Post by **oldmax** » Sun May 04, 2008 6:12 am

LEVERS: Lee loader for the 308 still available,
If so I would like it.... Thanks...

levers · Post by **levers** » Sun May 04, 2008 8:35 am

You've got the Lee Loader, Old Max. PM me your address.

44/40 · Post by **44/40** » Sun May 04, 2008 9:43 am

Levers - I'll call dibs on the other set of 9mm dies if they're not yet spoken for. Will find something to offer up in return later today. Thanks.

bsaride · Post by **bsaride** » Sun May 04, 2008 10:02 am

44/40 wrote:Levers - I'll call dibs on the other set of 9mm dies if they're not yet spoken for. Will find something to offer up in return later today. Thanks.

Not Levers,

I have the dies and you will get the other 9mm set.

Send a PM with address, these are going to be sent out on thurs.

44/40 · Post by **44/40** » Sun May 04, 2008 10:13 am

Sorry bsaride, and apologies to Levers - not enough coffee in me yet...
pm w/ mailing addy sent - THANKS.

Travis Morgan · Post by **Travis Morgan** » Mon May 05, 2008 12:43 am

levers wrote:I'll offer up a Pro Line bow sight and mechanical wrist release. Used but in decent shape. The Pro Line has 6 pins. I think I had it mounted on a PSE Mach Flight 4.

If this is still available, I'd sure like to have it. Glad to see this is taking off! I have a bunch of odds and ends I'll put on here.

Mokwaw · Post by **Mokwaw** » Mon May 05, 2008 8:30 am

Wes....I would like the Weaver Rings if still available. Waited a few days to give someone else a chance, felt like I was being too greedy.

I still have the 2 holsters and the 1911 mag left for grabs from my list on page 7.

Thanks

PM sent

levers · Post by **levers** » Mon May 05, 2008 9:31 am

Hi Travis
You got the sight and release. PM an address to me.

Blackhawk · Post by **Blackhawk** » Mon May 05, 2008 11:45 am

I haven't went thru my storage but I'll post what I have from memory. That'll help get me off my butt as well if anybody can use what I have.

Weaver 2 piece bases for Winchester AE.
Ruger Blackhawk grips, stock. Came off my 45 Colt.
Lee factory powder scale.

Crow calling tape: I'm also going to see if I can find a two side tape deck and record a crow calling tape if anybody is interested in one of those. First and only time I played it was in my truck and crows came to it. So if someone has an older caller that uses tapes let me know.

Johnny

Travis Morgan · Post by **Travis Morgan** » Mon May 05, 2008 2:00 pm

I have a left handed Fobus Glock holster, NIB, if anyone wants it, as well as a pair of Sig 220 factory grips.

Levers, thanks for the bow stuff!

Blackhawk, if you don't think it'd be greedy of me, I'd like those grips. one pair of mine seems too short for the gun.

Travis Morgan · Post by **Travis Morgan** » Mon May 05, 2008 2:02 pm

Nearly forgot~ If any of you have a Ted Williams shotgun, I have some Ted Williams 12 gauge shells for it. They're loaded ammo, so I dunno if I can ship them or not, but you're certainly welcome to them!

Blackhawk · Post by **Blackhawk** » Mon May 05, 2008 5:14 pm

Travis Morgan wrote:I have a left handed Fobus Glock holster, NIB, if anyone wants it, as well as a pair of Sig 220 factory grips.

Levers, thanks for the bow stuff!

Blackhawk, if you don't think it'd be greedy of me, I'd like those grips. one pair of mine seems too short for the gun.

Travis,

Not greedy at all. I give because I don't mind sharing.

PM me your address and I'll dig'em out for you. Word of caution though, I'm working 12 hours days this week so be patient with me.

Johnny

Yance · Post by **Yance** » Mon May 05, 2008 6:54 pm

Mokwaw wrote:Wes..
I still have the 2 holsters and the 1911 mag left for grabs from my list on page 7.

Mokwaw;

Since no one seems to want the Pachmyer 1911 Mag, I'll give it a good home.

PM on the way.

JeffG · Post by **JeffG** » Mon May 05, 2008 7:42 pm

Hello Blackhawk,
If noone has spoken for the powder scale, I'd like to.

I want to get into reloading, but I don't have the nerve to spend abunch of money (read: I don't have the nerve to negotiate with my wife about more shooting expenses...but reloading is cheaper than buying factory ammo...right?).

I will go through my good stuff and find something to offer forward, this is great!

Travis Morgan · Post by **Travis Morgan** » Mon May 05, 2008 9:38 pm

Sig 220 grips gone to levers.

Blackhawk, PM sent.

bsaride · Post by **bsaride** » Mon May 05, 2008 10:15 pm

JeffG wrote:Hello Blackhawk,
If noone has spoken for the powder scale, I'd like to.

I want to get into reloading, but I don't have the nerve to spend abunch of money (read: I don't have the nerve to negotiate with my wife about more shooting expenses...but reloading is cheaper than buying factory ammo...right?).

I will go through my good stuff and find something to offer forward, this is great!

Jeff,

What do you need? Send me a PM as I have some stuff available.

Jay

Mokwaw · Post by **Mokwaw** » Tue May 06, 2008 5:35 am

Mokwaw;

Since no one seems to want the Pachmyer 1911 Mag, I'll give it a good home.

Yance........ok on the mag, will try to get it out today.

Blackhawk · Post by **Blackhawk** » Tue May 06, 2008 10:13 am

JeffG wrote:Hello Blackhawk,
If noone has spoken for the powder scale, I'd like to.

I want to get into reloading, but I don't have the nerve to spend abunch of money (read: I don't have the nerve to negotiate with my wife about more shooting expenses...but reloading is cheaper than buying factory ammo...right?).

I will go through my good stuff and find something to offer forward, this is great!

Jeff,

Send me a PM with your address and I send it to you.

Johnny

JeffG · Post by **JeffG** » Tue May 06, 2008 1:29 pm

PM sent to Blackhawk and BSAride...I think. They did not show up in my "sent" mailbox. Let me know if they didn't arrive.

Mtnfolk75 · Post by **Mtnfolk75** » Tue May 06, 2008 1:34 pm

JeffG,
The way the PM thing works, the outbound PM's remain in your outbox until they are opened by the addressee. They will then move to your sentbox.

bsaride · Post by **bsaride** » Tue May 06, 2008 6:08 pm

JeffG wrote:PM sent to Blackhawk and BSAride...I think. They did not show up in my "sent" mailbox. Let me know if they didn't arrive.

Hit me again,
Nothin showed up here.

Jay

JeffG · Post by **JeffG** » Tue May 06, 2008 8:45 pm

OK, I tried PMs again to both of you.
What I'd like to offer forward is making a wooden carrying case for someone's long gun. I could make it with a walnut frame or cherry (or other hardwood), and harwood veneer plywood panels. I'd leave the padding and varnishing for you. I have some average brass hardware hiding around here somewhere that I would put on it.
let me know the dimensions (one gun or two...no 32" goose guns please)

levers · Post by **levers** » Tue May 06, 2008 9:43 pm

JeffG....I think that sounds way too generous.

azoil · Post by **azoil** » Tue May 06, 2008 10:06 pm

TomF wrote:Azoil and Wes, PMs replied to. Holster and sling have been spoken for.

TomF

Holster arrived Tom. Thanks again!!

44/40 · Post by **44/40** » Tue May 06, 2008 10:35 pm

Almost forgot after jumping on the other set of 9mm dies -
Offering up a lightly used Lee Collet sizing die set for 6.5X55 Swede.

Marlin .35 · Post by **Marlin .35** » Tue May 06, 2008 11:29 pm

Many thanks to bsa ride for the holster and the surprize. I am one happy camper. God bless you!! Art

meanc · Post by **meanc** » Wed May 07, 2008 12:28 am

JeffG

I would love to take you up on that offer... I've been thinking about building one here lately for my Win94 Legacy in 45Colt with a small section for my Ruger 45Colt Vaquero.

But that is a whole lot of work. And shipping would be a big cost too, I'm sure.

Thank you for offering that up though. A very generous one for sure.

PAY IT FORWARD

Pay it forward

Holster and powder measure

Pay It Forward ......