Henry Slippery Metal Buttplate
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- BlaineG
- Posting leader...
- Posts: 26801
- Joined: Mon Dec 17, 2007 2:22 pm
- Location: Spanaway, Washington
Henry Slippery Metal Buttplate
Can anybody think of a very thin applique that would add a bit of traction? I don't want to ruin it or make it permanate, just well secured in place.
If You Back Me Into A Corner There Will Not Be Enough Room For Both Of Us. 

Re: Henry Slippery Metal Buttplate
Sticky back sand paper like for an orbit sander
All responses have been cleared by the law firm of "Lawyers Inc."
Re: Henry Slippery Metal Buttplate
I use adhesive backed brown felt strips ordered from amazon and ebay......
m.A.g.a. !
Re: Henry Slippery Metal Buttplate
Good idea, here are some ideas that might work also
https://www.3riversarchery.com/adhesive ... erial.html
All responses have been cleared by the law firm of "Lawyers Inc."
Re: Henry Slippery Metal Buttplate
m.A.g.a. !
- BlaineG
- Posting leader...
- Posts: 26801
- Joined: Mon Dec 17, 2007 2:22 pm
- Location: Spanaway, Washington
Re: Henry Slippery Metal Buttplate
Good ideas...Thanks 

If You Back Me Into A Corner There Will Not Be Enough Room For Both Of Us. 

- Ji in Hawaii
- Senior Levergunner
- Posts: 1899
- Joined: Sat Jan 15, 2011 1:05 pm
- Location: Moku Manu, Hawai'i
Re: Henry Slippery Metal Buttplate
Adhesive backed clear non-slip stair strips.


Illegitimus Non Carborundum
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
-
- Levergunner 3.0
- Posts: 742
- Joined: Sat Jan 01, 2011 2:42 am
- Location: mechanicsville, md.
- Contact:
Re: Henry Slippery Metal Buttplate
velcro.! have some left over from my honeymoon! 

Rossi 92 .357 lever
Henry .22 lever and a remington speedmaster 500 .22 lr
Marlin glenfield .22 boltaction
Mossberg 12 ga. pump
H&R 12 ga. topper
Mosin Nagant 91/30
Marlin 336W .30.30
Heritage rough rider .22 sa
Taylor smokewagon .357 sa
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
Henry .22 lever and a remington speedmaster 500 .22 lr
Marlin glenfield .22 boltaction
Mossberg 12 ga. pump
H&R 12 ga. topper
Mosin Nagant 91/30
Marlin 336W .30.30
Heritage rough rider .22 sa
Taylor smokewagon .357 sa
beeman sportsman rs2 dual caliber pellet rifle
henry .22 magnum pumpaction/octagon barrel
- BlaineG
- Posting leader...
- Posts: 26801
- Joined: Mon Dec 17, 2007 2:22 pm
- Location: Spanaway, Washington
Re: Henry Slippery Metal Buttplate


If You Back Me Into A Corner There Will Not Be Enough Room For Both Of Us. 

-
- Advanced Levergunner
- Posts: 2190
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: Henry Slippery Metal Buttplate
if the buttplate is blued (black) go to the auto parts store and get a spray can of truck Bedliner, tape off what you don't want covered and give her a squirt
You could do a half inch strip down the center of the buttplate and it wouldn't be very obvious, or do the whole thing.
You could do a half inch strip down the center of the buttplate and it wouldn't be very obvious, or do the whole thing.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
- BlaineG
- Posting leader...
- Posts: 26801
- Joined: Mon Dec 17, 2007 2:22 pm
- Location: Spanaway, Washington
Re: Henry Slippery Metal Buttplate
It's the bright brass Henry....If I was flush, I'd just get the little 16" Black Steel short rifle.fordwannabe wrote: ↑Fri Jul 13, 2018 7:54 pmif the buttplate is blued (black) go to the auto parts store and get a spray can of truck Bedliner, tape off what you don't want covered and give her a squirt
You could do a half inch strip down the center of the buttplate and it wouldn't be very obvious, or do the whole thing.
If You Back Me Into A Corner There Will Not Be Enough Room For Both Of Us. 

-
- Levergunner 3.0
- Posts: 653
- Joined: Wed Jan 28, 2009 9:12 pm
- Location: Bushwhacker Capitol, Missouri
Re: Henry Slippery Metal Buttplate
Here is a solution that includes a sling. http://possibleshop.com/p-g-rifle-sling.html
Suede would be better but, the leather could be ruffed up with sand paper.
Suede would be better but, the leather could be ruffed up with sand paper.
- BlaineG
- Posting leader...
- Posts: 26801
- Joined: Mon Dec 17, 2007 2:22 pm
- Location: Spanaway, Washington
Re: Henry Slippery Metal Buttplate
That would be sort of classy. I don't know about the sling, tho....765x53 wrote: ↑Mon Jul 16, 2018 11:16 pmHere is a solution that includes a sling. http://possibleshop.com/p-g-rifle-sling.html
Suede would be better but, the leather could be ruffed up with sand paper.
If You Back Me Into A Corner There Will Not Be Enough Room For Both Of Us. 

Re: Henry Slippery Metal Buttplate
All responses have been cleared by the law firm of "Lawyers Inc."
Who is online
Users browsing this forum: Old No7 and 24 guests