HELP!!!!!

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:
Contact rbertalotto

HELP!!!!!

Post by rbertalotto »

I'm here in Vermont at a Cowboy Action Shoot. I'm sighting in my Mirkou Winchester 1894 rifle in 38-55....Everything is going great. I get ready to put the rifle back in the case and a part falls out of the bottom. I searched all parts drawings I could find here on the internet with no luck.
Can anyone identify this part and tell me where it belongs

Image

Image
Roy B
Dartmouth, MA
www.rvbprecision.com
Top
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: HELP!!!!

Post by Chuck 100 yd »

Ejector ? The photo needs something in it to judge for scale.
Top
harry
Senior Levergunner
Posts: 1405
Joined: Mon Jul 28, 2008 8:33 pm
Location: West central Montana

Re: HELP!!!!

Post by harry »

Chuck 100 yd wrote:Ejector ? The photo needs something in it to judge for scale.
This not a Japster ejector but a winchester http://www.gunpartscorp.com/Products/317890.htm
Trump 2024

All responses have been cleared by the law firm of "Elmer and Fudd."
Top
JB
Senior Levergunner
Posts: 1535
Joined: Tue Dec 11, 2007 3:35 pm
Location: WV

Re: HELP!!!!!

Post by JB »

It's just an extra part, don't worry about it ;)

I'm not sure why the ejector would just fall out.
Top
User avatar
Griff
Posting leader...
Posts: 21415
Joined: Sat Mar 31, 2007 4:56 pm
Location: OH MY GAWD they installed a STOP light!!!

Re: HELP!!!!!

Post by Griff »

Yep, that looks like the ejector.
Image
Item #14
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93

There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Top
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:
Contact rbertalotto

Re: HELP!!!!!

Post by rbertalotto »

https://www.rebelgunworks.net/products/ ... le-ejector

Yup, ejector. Now I need to figure out how to put it back in and where the spring and the pin are.
Roy B
Dartmouth, MA
www.rvbprecision.com
Top
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: HELP!!!!!

Post by M. M. Wright »

Good luck on finding the other parts. My suggestion is to get a big magnet and troll for it. Really, just buy new. And figure how it just fell out.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Top
User avatar
Malamute
Member Emeritus
Posts: 3868
Joined: Tue Apr 03, 2007 8:56 am
Location: Rocky Mts

Re: HELP!!!!!

Post by Malamute »

Ive never seen a Winchester 94 lose one, though I did see a Rossi 92 lose one for no apparent reason. I replaced it in the guys gun, expecting to see some super loose fit of the pin that retained it, but it seemed to fit OK and be held in place when reinstalled.

That's colored my impression of Rossis ever since. That, and the odd lines of the lower receiver.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-

Isnt it amazing how many people post without reading the thread?
Top
Post Reply

Return to “General Discussion”