35/30 or 35/30-30
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
35/30 or 35/30-30
Does anyone have any experience with this caliber? There are a few renditions of this concept but I am specifically talking about a plain ole 30WCF or 32 SPL necked up to .358. It seems it was once very popular for "shot out" 30 and 32 caliber barrels, particularly in Win 94's. I know who will do the conversion and where I can get reloading dies. What I am wanting to know is any personal experience with loading or loads, hunting use, ballistics, firearms functioning and alterations, etc. I have multiple 30-30 caliber rifles but my favorite is the .35's including 360DW, 35 Rem, 356 Win and 35 Whelen. I have 180 and 200 grain bullets and know what velocity I need to make 'em perform as I am used to. I just thought it would be a cool conversion that is very useful to me. Any info is appreciated.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
- Old Savage
- Posting leader...
- Posts: 16688
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: 35/30 or 35/30-30
No experience but it has always interested me too. It is listed in Cartridges of the World I believe.
Re: 35/30 or 35/30-30
that's a very cooool idea...wish i had info...waiting to hear more... :)
-
- Senior Levergunner
- Posts: 1026
- Joined: Thu Sep 06, 2007 5:57 pm
- Location: Central Maine
Re: 35/30 or 35/30-30
From Reloading Bench Site:
"Historical Notes:
Although not widely known, the 35-30/30 is one of the oldest wildcats, having originated around the turn of the century. Its original purpose was to salvage worn out 32-40 and 32 Winchester Special barrels by reboring them to 35 caliber. The idea was also implied to improve the performance of Winchester Model 1894 rifles and carbines while staying within the cartridge length and pressure limitations of this action. The 35-30/30 cartridge is based on necking up 30-30 or 32 Winchester Special brass without any other change, although a few rifles have been made up to accept the Ackley Improved version of this case. Recently there has been a rebirth of interest in this cartridge by silhouette shooters who like to use cast bullets. In 1976, Arizona gunsmith Paul Marquart built several 35-30/30 silhouette rifles built on the Remington 788 action, and these quickly established a reputation as being both accurate and effective for the intended sport. Information on these rifles was published in The Fouling Shot, published by the Cast Bullet Association, and other shooters found it promising as a target and hunting cartridge. The 35-30/30 can be loaded to about equal the ballistics of the 35 Remington, and in fact, if Remington hadn't introduced their rimless 35 in 1908, it is highly possible that the necked up 30-30 would have become much more popular than it did. In any event, it is picking up a new but modest following.
General Comments:
With jacketed bullets there is little, if any, difference between the ballistics and killing power of the 35-30/30 and the 35 Remington. On paper the 35 Remington appears to have an edge over the 35-30/30 because it has about 14 percent greater powder capacity, but the factory 200 grain bullet loading rarely attains 2000 fps except in a 24 inch test barrel chiefly because of rather anemic loading pressures. As a cast bullet cartridge, the 35-30/30 with its longer neck permits use of cast bullets as heavy as 270 grains seated to a depth that will feed through magazine rifles designed for the 30-30. This is not possible with the 35 Remington and its short neck. In a strong action, the 35-30/30 can be loaded to deliver performance approaching the 375 Winchester. However, in a strong action, the 35 Remington can be stepped up quite a bit too. It is possible to attain 1800 fps with a 300 grain bullet in a strong action chambered 35-30/30, which would make it adequate for elk or moose at short range. It is a good cartridge for upping the performance of 30-30 rifles or for salvaging worn out 32 Special barrels. For a wildcat, it is rather a special purpose cartridge, but one that may fill the needs of a number of shooters. Dies are available from RCBS and chamber reamers from Clymer."
At one point I was going to convert a Savage 99 that I had laying around but I ended up selling it. The reason of doing it was the longer case neck so I had more of a selection of cast bullets to use. Also, dies are available at CH4D Tool & Die. As mentioned the performance is about the same as the 35 Remington. I do believe JES gunsmith does the conversion.
http://www.35caliber.com/
Mainehunter![Wink :wink:](./images/smilies/icon_wink.gif)
"Historical Notes:
Although not widely known, the 35-30/30 is one of the oldest wildcats, having originated around the turn of the century. Its original purpose was to salvage worn out 32-40 and 32 Winchester Special barrels by reboring them to 35 caliber. The idea was also implied to improve the performance of Winchester Model 1894 rifles and carbines while staying within the cartridge length and pressure limitations of this action. The 35-30/30 cartridge is based on necking up 30-30 or 32 Winchester Special brass without any other change, although a few rifles have been made up to accept the Ackley Improved version of this case. Recently there has been a rebirth of interest in this cartridge by silhouette shooters who like to use cast bullets. In 1976, Arizona gunsmith Paul Marquart built several 35-30/30 silhouette rifles built on the Remington 788 action, and these quickly established a reputation as being both accurate and effective for the intended sport. Information on these rifles was published in The Fouling Shot, published by the Cast Bullet Association, and other shooters found it promising as a target and hunting cartridge. The 35-30/30 can be loaded to about equal the ballistics of the 35 Remington, and in fact, if Remington hadn't introduced their rimless 35 in 1908, it is highly possible that the necked up 30-30 would have become much more popular than it did. In any event, it is picking up a new but modest following.
General Comments:
With jacketed bullets there is little, if any, difference between the ballistics and killing power of the 35-30/30 and the 35 Remington. On paper the 35 Remington appears to have an edge over the 35-30/30 because it has about 14 percent greater powder capacity, but the factory 200 grain bullet loading rarely attains 2000 fps except in a 24 inch test barrel chiefly because of rather anemic loading pressures. As a cast bullet cartridge, the 35-30/30 with its longer neck permits use of cast bullets as heavy as 270 grains seated to a depth that will feed through magazine rifles designed for the 30-30. This is not possible with the 35 Remington and its short neck. In a strong action, the 35-30/30 can be loaded to deliver performance approaching the 375 Winchester. However, in a strong action, the 35 Remington can be stepped up quite a bit too. It is possible to attain 1800 fps with a 300 grain bullet in a strong action chambered 35-30/30, which would make it adequate for elk or moose at short range. It is a good cartridge for upping the performance of 30-30 rifles or for salvaging worn out 32 Special barrels. For a wildcat, it is rather a special purpose cartridge, but one that may fill the needs of a number of shooters. Dies are available from RCBS and chamber reamers from Clymer."
At one point I was going to convert a Savage 99 that I had laying around but I ended up selling it. The reason of doing it was the longer case neck so I had more of a selection of cast bullets to use. Also, dies are available at CH4D Tool & Die. As mentioned the performance is about the same as the 35 Remington. I do believe JES gunsmith does the conversion.
http://www.35caliber.com/
Mainehunter
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: 35/30 or 35/30-30
No experience with it either, but I can see the point of it. A larger chunk of lead at a modest velocity seems to work well in most conditions.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: 35/30 or 35/30-30
If the hobbiest is looking for a way to spend time at the bench with something a little different, it sounds interesting, but for a hunter I find the statement from the article posted above to be somewhat telling:
"With jacketed bullets there is little, if any, difference between the ballistics and killing power of the 35-30/30 and the 35 Remington."
If it performs as reliably as a .35rem, why not?
If you've already got a .35Rem, then... why?
It does sounds like it would be an easy shooter.
Also sounds like you'd have to scrounge up some brass and dies, have them made, or make them youself.
![Smile :)](./images/smilies/icon_smile.gif)
"With jacketed bullets there is little, if any, difference between the ballistics and killing power of the 35-30/30 and the 35 Remington."
If it performs as reliably as a .35rem, why not?
If you've already got a .35Rem, then... why?
It does sounds like it would be an easy shooter.
Also sounds like you'd have to scrounge up some brass and dies, have them made, or make them youself.
![Smile :)](./images/smilies/icon_smile.gif)
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
- J Miller
- Member Emeritus
- Posts: 14880
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: 35/30 or 35/30-30
Fire forming 32WS brass would be a piece of cake. That would be an easy cartridge to make and use.
Joe, if you do get one made I'm interested in the test reports.
Joe
Joe, if you do get one made I'm interested in the test reports.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts
.***
![Wink ;)](./images/smilies/icon_wink.gif)
Re: 35/30 or 35/30-30
I have a Win 94 and a 32 Special barrel I bought especially for this and several 35 Cal molds and and and....
If you decide to have it done, I might ship mine in at the same time.
If you decide to have it done, I might ship mine in at the same time.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: 35/30 or 35/30-30
I do not have a 35 Rem levergun. I do have other rifles in that caliber. I had a Marlin in 35 Rem but I gave it to a friend as I am not a huge Marlin fan. On that note, I haven't found a Winchester that I would want to convert. Nonetheless, I have a good candidate for this conversion. The rifle is packed and ready to go to JES. I have to call CH-4d for the dies.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
Re: 35/30 or 35/30-30
Try searching on the Marlin Forum for info. I know it has been discussed on the site before. I didn't take up much interest in those threads at the time.
Re: 35/30 or 35/30-30
35-30/30 (35-30) Reloading Data
Bullet (grs.) Powder / (grs.) MV ME Source
200 JSP IMR4198 / 25.0 1925 1650 N/A
208 Lead IMR4198 / 25.0 1895 1660 N/A
210 Lead W630 / 15.0 1520 1080 Lyman 35875
245 Lead H335 / 30.0 1770 1710 Lyman 358318
282 Lead H335 / 28.0 1700 1810 Lyman 3589
292 Lead W748 / 33.5 1620 1580
I think similar data for a necked up 32.
Could run data thru the quick design and quick load programs too.
Bullet (grs.) Powder / (grs.) MV ME Source
200 JSP IMR4198 / 25.0 1925 1650 N/A
208 Lead IMR4198 / 25.0 1895 1660 N/A
210 Lead W630 / 15.0 1520 1080 Lyman 35875
245 Lead H335 / 30.0 1770 1710 Lyman 358318
282 Lead H335 / 28.0 1700 1810 Lyman 3589
292 Lead W748 / 33.5 1620 1580
I think similar data for a necked up 32.
Could run data thru the quick design and quick load programs too.
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: 35/30 or 35/30-30
Hmmm, this sounds like it might be an interesting project for someone with a Savage 340 (IIRC) in .30-30. Would that action handle it though?
Must resist...
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Must resist...
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-
- Senior Levergunner
- Posts: 1026
- Joined: Thu Sep 06, 2007 5:57 pm
- Location: Central Maine
Re: 35/30 or 35/30-30
I would think JES could answer that. I would think since the Savage is chambered in the 30-30 it shouldn't have any problems even though the bolt handle is the only locking lug it uses.awp101 wrote:Hmmm, this sounds like it might be an interesting project for someone with a Savage 340 (IIRC) in .30-30. Would that action handle it though?
Must resist...![]()
86er...Just curious what have you decided on the twist rate and number of groves? There was a guy that used to shoot at the gun range few years back had one chamber in a TC. If I recall he used mostly pistol bullets up to 200 grains. Quite accurate out to 200 yards.
Mainehunter
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: 35/30 or 35/30-30
A man that I meet at the rifle range had one on a Ruger #1 and shot cast out of it. He praised it very highly in every way. He also used 30-30 brass necked up and said with Imperial die wax it was easy to neck up.
I would do this in a heartbeat if I found a 30-30 with bad bore.
I would do this in a heartbeat if I found a 30-30 with bad bore.
Re: 35/30 or 35/30-30
I would go 3-groove 1:16
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: 35/30 or 35/30-30
How does it compare to a Win. 94 in 38-55 is it any better? I have a Jes rebored 30-30.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
Re: 35/30 or 35/30-30
Ran some numbers using the Kodiak 250gr .35 bullet for the 35-30/30
Can get to 1900fps fairly easily with a number of powders. Some pretty close to max pressures, some under max a bit. (39k psi)
That would be a pretty good load I should think.
I have other things going on right now, But I am still wanting to neck up a 338ME to 348 or 358. With Barnes (348) and Speer (358) bullets, can squeeze 300yd elk performance out of it.
Next year's project.
Can get to 1900fps fairly easily with a number of powders. Some pretty close to max pressures, some under max a bit. (39k psi)
That would be a pretty good load I should think.
I have other things going on right now, But I am still wanting to neck up a 338ME to 348 or 358. With Barnes (348) and Speer (358) bullets, can squeeze 300yd elk performance out of it.
Next year's project.
Re: 35/30 or 35/30-30
So does anyone here actually have one - or know of one personally? I'd love to borrow a set of dies or send some brass for resizing.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
- Old Savage
- Posting leader...
- Posts: 16688
- Joined: Mon Sep 03, 2007 3:43 pm
- Location: Southern California
Re: 35/30 or 35/30-30
What you are going to have is a Model 94 in 35 Remington. Resizing will be super easy.
Re: 35/30 or 35/30-30
I ordered dies for 35/30-30 but one place expects shipment in September and the other says minimum 60 days with no committment. I'd like to get at least 50 pieces of brass made meanwhile to shoot the darn thing.
Professional Hunter
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
http://www.TARSPORTING.com
"Worldwide Hunting Adventures"
Professional Hunters Assoc of South Africa
SCI - Life Member
NRA - Life Member
NAHC - Trophy Life Member
DWWC - Member
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: 35/30 or 35/30-30
86'er If you have 358Win or 357 herrett dies you could use that to expand the cases and size the necks. Use a 375Win die for the case head. 35Herrett seater for the bullets. I have a Saeco 245FP mold if you have any interest in it. I was going to have one done on a Contender barrel but decided to keep it in 38 cause it is just too accurate to mess up.
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
- earlmck
- Advanced Levergunner
- Posts: 3423
- Joined: Tue Nov 30, 2010 12:10 am
- Location: pert-neer middle of Oregon
Re: 35/30 or 35/30-30
Yes indeed. Or 35 Remington dies for expanding and seating, along with that 375 Win (or 38/55 ) as a "body die". And if the neck expansion part is giving problems, my reloading notes show me that I have used 18 grains of Unique held in by a tuft of dacron, no bullet, to fireform 222mag cases into 25X47 cases, and I'd guess the same (or maybe a couple grains more) recipe would take 30/30 to 30/35.3leggedturtle wrote:86'er If you have 357 herrett die you could use that to expand the cases and size the necks. Use a 375Win die for the case head. 35Herrett seater for the bullets.
The greatest patriot...
is he who heals the most gullies. Patrick Henry
is he who heals the most gullies. Patrick Henry
-
- Levergunner 2.0
- Posts: 162
- Joined: Wed Aug 27, 2008 9:45 am
Re: 35/30 or 35/30-30
I just got done with Joe's Henry rifle that was converted to 35-30/30 by JES. What a hoot! Very low recoil for the amount of power you're getting in a 7 lbs rifle. We settled for BENCHMARK as a powder and 33.8-34.2 grains will work well for 200 gr Remington Core Lokt, 200 gr Hornady FTX, 205 gr GC Saeco and 215 gr GC Lyman. The velocities were at or near 2100 fps with the jacketed bullets, and the lighter cast bullet exceeded that while the heavier cast bullet was under that by 150 fps or so (20" bbl). The accuracy was fantastic. With the 2X7 Leupold scope @ 100 yds some of the loads would put 3 rounds into an inch while the worst of the bunch was making 2 inch groups. JES did a good job. I used Winchester 30-30 new brass and it tended to crush the necks with Joe's dies (Redding) that he sent me. I ended up using 4 stages with a combo of other 358 dies to form the brass. Fireforming was another matter. Easily fire formed to proper dimensions and then ran through the 2 Redding dies to resize and reload with no issues. The OAL was a wee bit too long at first but the best way to decide the right OAL is to run the rounds through the action long and reduce the OAL until they function and feed perfectly. This was within the crimp groove of the Remington bullets, just above with the Hornady and wherever it happened to land with the cast bullets. Although Joe did not want any at this time, we can get 300 grain bullets at 1950 fps for that odd moose or bear hunt where you want a little more bullet weight
. Field reports, studies and experience prove the .358 bullet (cast or intended for 35 Rem) to be fantastic performers on medium sized game and 180 grain pistol bullets should be good (I also loaded Brandon's 360DW rifle cartridges with 180 gr Hornady XTP @ 1920 fps and they have an unbelievable track record) and very mild. Anyway - this was my first go-around with a 35-30/30 "wildcat" but it is a worthy cartridge that I recommend to anyone that doesn't mind the initial cost and then the subsequent reloading.
![Wink :wink:](./images/smilies/icon_wink.gif)
Mike Rintoul
Owner
Grizzly Cartridge Ammunition Company
www.grizzlycartridge.com
Cast Performance Bullet Company
Rainier, Oregon
(503) 556-3006
Owner
Grizzly Cartridge Ammunition Company
www.grizzlycartridge.com
Cast Performance Bullet Company
Rainier, Oregon
(503) 556-3006
- El Chivo
- Advanced Levergunner
- Posts: 3611
- Joined: Mon Sep 03, 2007 5:12 pm
- Location: Red River Gorge Area
Re: 35/30 or 35/30-30
One thing I see about this cartridge vs. 35 Rem is to see if accuracy is affected by how much neck tension there is. The 35 Rem bullet starts sloping almost immediately. It's made for a short neck. You probably should try a 35 Whelen bullet in the 35-30, because the base will be longer before it starts sloping and you can insert it deeply into the neck. Hornady makes both kinds (I was afraid of getting the wrong one).
But I was wondering, if, in a rifle, is accuracy helped by the long neck or short neck? Lee talks about bench rest shooters seating the bullet in lightly with no crimp, and gingerly putting the round in the chamber. That makes it sound like the less tension, the better. My 35 Rem is more accurate than my 30-30.
86-er, I made a few demos using 30-30 dies to size the body and 35 Rem die to open up the neck. I'm sure you have those dies already. I thought of "making" my own by switching the 35 Rem plug into the 30-30 die body, but one is frozen in place so I'll have to start new.
I have been thinking of this conversion for a while, but am hesitating because the 35 Rem has the extra case capacity. I would like it for shooting pistol bullets, but I have rifles in .357 magnum. So it's definitely not a great need. I might be better off keeping mine a 30-30.
But I was wondering, if, in a rifle, is accuracy helped by the long neck or short neck? Lee talks about bench rest shooters seating the bullet in lightly with no crimp, and gingerly putting the round in the chamber. That makes it sound like the less tension, the better. My 35 Rem is more accurate than my 30-30.
86-er, I made a few demos using 30-30 dies to size the body and 35 Rem die to open up the neck. I'm sure you have those dies already. I thought of "making" my own by switching the 35 Rem plug into the 30-30 die body, but one is frozen in place so I'll have to start new.
I have been thinking of this conversion for a while, but am hesitating because the 35 Rem has the extra case capacity. I would like it for shooting pistol bullets, but I have rifles in .357 magnum. So it's definitely not a great need. I might be better off keeping mine a 30-30.
"I'll tell you what living is. You get up when you feel like it. You fry yourself some eggs. You see what kind of a day it is."
-
- Levergunner 3.0
- Posts: 506
- Joined: Sat Aug 03, 2013 12:21 pm
Re: 35/30 or 35/30-30
I had one of these as a spare rifle barrel for a Savage 220 single shot shotgun; a machinist friend of mine relined a 16 guage shotgun barrel (somebody had blown the choke end off it, probably shooting it full of mud or snow) with a .358 barrel blank and added a scope base. He loved the .35-30 and had a beautiful rebarreled Krag-actioned single shot that he used in cast bullet matches.
I mostly shot mine with .357 and .38 bullets using subloads and a filler. Don't seem to have any load data left from that--it was in the early 1980s and I've made several moves since then (and sold the barrel to another friend years ago). I attended one of the cast bullet matches with my machinist friend and there was somebody there who had a rebarreled Rem 788 .30-30 in .35-30. He was shooting 200 gr. cast bullets into tiny little groups with it.
Never bothered to die form .35-30; just loaded range pickup .30-30s with cheap cast .308 bullets and a subload with corn meal, fire formed in the .35-30 and trimmed. Easy-peasy. Of course that was back when .30-30 shooters mostly left their brass on the bench or on the ground. You don't see so much of that now.
I mostly shot mine with .357 and .38 bullets using subloads and a filler. Don't seem to have any load data left from that--it was in the early 1980s and I've made several moves since then (and sold the barrel to another friend years ago). I attended one of the cast bullet matches with my machinist friend and there was somebody there who had a rebarreled Rem 788 .30-30 in .35-30. He was shooting 200 gr. cast bullets into tiny little groups with it.
Never bothered to die form .35-30; just loaded range pickup .30-30s with cheap cast .308 bullets and a subload with corn meal, fire formed in the .35-30 and trimmed. Easy-peasy. Of course that was back when .30-30 shooters mostly left their brass on the bench or on the ground. You don't see so much of that now.
Re: 35/30 or 35/30-30
It isn't just about neck length = neck tension. Longer necks are desired by many to keep the bullet aligned better. The difference in accuracy between your 30-30 and 35 are not likley just from neck length or tension. There's many other variables.El Chivo wrote: But I was wondering, if, in a rifle, is accuracy helped by the long neck or short neck? Lee talks about bench rest shooters seating the bullet in lightly with no crimp, and gingerly putting the round in the chamber. That makes it sound like the less tension, the better. My 35 Rem is more accurate than my 30-30.
"Far better it is to dare mighty things, to win glorious triumphs even though checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much because they live in the gray twilight that knows neither victory nor defeat." -Theodore Roosevelt-
Isnt it amazing how many people post without reading the thread?
Isnt it amazing how many people post without reading the thread?
-
- Levergunner 1.0
- Posts: 98
- Joined: Thu Nov 28, 2013 8:09 pm
- Location: NW Corner of Vermont
Re: 35/30 or 35/30-30
Newbie here, found this site while searching for info on 35-30-30. I will be following this thread while I'm waiting for my stars to align and I find an affordable 94 to have rebored.
Re: 35/30 or 35/30-30
Welcome to the forum Alan. If you keep searching there is another thread where 86er tells of his first hunt using the .35/.30-30.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
-
- Levergunner 1.0
- Posts: 98
- Joined: Thu Nov 28, 2013 8:09 pm
- Location: NW Corner of Vermont
Re: 35/30 or 35/30-30
I have been messing with cast bullets in 30-30 and have reached the point of using the same powder charges as I do behind similar weights of jacketed bullets. I kinda/sorta want to try something with a bigger bore and there have to be some 94s out there that can be bought reasonably because the bores, or even the exteriors, are bad. I've only got the one 94 and it is a bit on the ugly side but it shoots so the first step on this adventure is to find a specimen that needs a rebore. Hopefully when I find one I'll have sufficient cash on hand to at least get it on layaway if not buy it outright. Sad, but the days of $100 94s are ancient history.
-
- Levergunner 2.0
- Posts: 162
- Joined: Wed Aug 27, 2008 9:45 am
Re: 35/30 or 35/30-30
I used 33.8 grains - 34.2 grains of Benchmark under a 200 grain Rem Core Lokt as well as Joe's 225 grain Saeco and Lyman cast bullets. They all are in the 2000-2100 fps range with same point of impact at 100 yards. The fire-forming was straight forward and the Redding dies were quality pieces that did the job well.
Mike Rintoul
Owner
Grizzly Cartridge Ammunition Company
www.grizzlycartridge.com
Cast Performance Bullet Company
Rainier, Oregon
(503) 556-3006
Owner
Grizzly Cartridge Ammunition Company
www.grizzlycartridge.com
Cast Performance Bullet Company
Rainier, Oregon
(503) 556-3006
-
- Levergunner 1.0
- Posts: 98
- Joined: Thu Nov 28, 2013 8:09 pm
- Location: NW Corner of Vermont
Re: 35/30 or 35/30-30
When I was campaigning a 357 Herrett (14") Contender in IHMSA I was fireforming 357H cases by firing 30-30 loads in the TC barrel. Trimmed to length they got neck sized with a 357 mag carbide sizer. A 35R Lyman "M" die did the expanding and a Lyman 35 Rem PA seater handled bullet seating. I'm going to try that same approach for 35/30-30. Not knowing if the shoulder will be a crush fit in the 35/30-30, as it was in the Herrett I'm not 100% sure it will work for the fireforming. Worst case is that I have neck the cases up to something over 35 cal, then neck size them just enough to be a crush fit for that first load.3leggedturtle wrote:86'er If you have 358Win or 357 herrett dies you could use that to expand the cases and size the necks. Use a 375Win die for the case head. 35Herrett seater for the bullets.
I'm working on getting a second 94 in the house, it looks like the $$ will be available for that at last. Then I'll have to come up with financing for the rebore/rechamber.
![Sad :(](./images/smilies/icon_sad.gif)
- Canuck Bob
- Senior Levergunner
- Posts: 1830
- Joined: Sun Oct 11, 2009 11:57 am
- Location: Calgary, Canada
Re: 35/30 or 35/30-30
Here is an outstanding link I think. This thread really caught my interest. This is from Ed Harris, the early NRA gun writer. I read him and consider him the real deal.
http://www.hensleygibbs.com/edharris/ar ... ster94.htm
Link to a forum thread that might have generated the above article.
http://www.castbulletassoc.org/forum/vi ... =ed+harris
Hope the article attached is readable.
http://www.hensleygibbs.com/edharris/ar ... ster94.htm
Link to a forum thread that might have generated the above article.
http://www.castbulletassoc.org/forum/vi ... =ed+harris
Hope the article attached is readable.
You do not have the required permissions to view the files attached to this post.
-
- Advanced Levergunner
- Posts: 2042
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: 35/30 or 35/30-30
86'er: have you anymore follow-up info on this project?
The 35/30-30 has always intrigued me and I have a 30WCF Marlin 336Y that is willing to be converted to a 35/30-30.
Thanks and tip o' the hat for any updated information.
The 35/30-30 has always intrigued me and I have a 30WCF Marlin 336Y that is willing to be converted to a 35/30-30.
Thanks and tip o' the hat for any updated information.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
-
- Senior Levergunner
- Posts: 1026
- Joined: Thu Sep 06, 2007 5:57 pm
- Location: Central Maine
Re: 35/30 or 35/30-30
I could be wrong but I think 86'er sold that rifle here on the classified few months ago. I had JES build me one a year ago on a Marlin 336A here's a pic:Ray Newman wrote:86'er: have you anymore follow-up info on this project?
The 35/30-30 has always intrigued me and I have a 30WCF Marlin 336Y that is willing to be converted to a 35/30-30.
Thanks and tip o' the hat for any updated information.
![Image](http://i125.photobucket.com/albums/p64/Basepin/imagejpg3_zps1b2cbec0.jpg)
I just put a few rounds in it last year to get a feel for it. This past winter I've researched some loads and ran them through Quickloads that I want to try out. I also picked up a nice NOE, 4 cavity bullet mold with interchangeable hollow point flat nose pins for the rifle. Flat nose should be around 230 gr. and hollow point around 214 gr.
As for dies you may want to call CH4D soon. I nearly spit out my coffee when I asked if they had the dies instock in which they did!
![Shocked :shock:](./images/smilies/icon_eek.gif)
Mainehunter
![Wink :wink:](./images/smilies/icon_wink.gif)
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
Long dead thread but since I am going to use Mainehunters 336 on this caliber for my buck gun this year, I am doing load development and accuracy testing.
I have the NOE mold he mentioned above and it works well. I have to be honest I NEEDED this rifle and was all set to give her heck, other things happened (I think its called life) and she got put on a back burner but not far back in the safe. Well this is the year. Taking her to the range with me on the rare Tuesday afternoon that it doesn’t rain. Taking three rifles most weeks Marlin 1892 in 32, Marlin 1895 Takedown in 45/70, and Marlin 336 A that has had the barrel cut and now resembles a S/C, in 35/30. I have the 230 grain lead, lots of 200 grain jacketed, and two boxes of 250 Hornady that may be as old as I am.
Any updates on your experiences with this caliber appreciated.
And it begins.
P.s. pretty sure next year my doe gun will be my model 71 that has had 6 shots through it since 1939.
I have the NOE mold he mentioned above and it works well. I have to be honest I NEEDED this rifle and was all set to give her heck, other things happened (I think its called life) and she got put on a back burner but not far back in the safe. Well this is the year. Taking her to the range with me on the rare Tuesday afternoon that it doesn’t rain. Taking three rifles most weeks Marlin 1892 in 32, Marlin 1895 Takedown in 45/70, and Marlin 336 A that has had the barrel cut and now resembles a S/C, in 35/30. I have the 230 grain lead, lots of 200 grain jacketed, and two boxes of 250 Hornady that may be as old as I am.
Any updates on your experiences with this caliber appreciated.
And it begins.
P.s. pretty sure next year my doe gun will be my model 71 that has had 6 shots through it since 1939.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
-
- Advanced Levergunner
- Posts: 8849
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 35/30 or 35/30-30
Good luck Ford. The one I had now lives in Texas, but I hope to run a 1951 336-A in .35 Remington in the woods this fall. I have the Lee 200-grain boolit to test, but would prefer more weight. However, you have to choose a mold wisely to fit the earlier Marlins with very little throat. I like this one:
http://www.accuratemolds.com/bullet_det ... 245S-D.png
http://www.accuratemolds.com/bullet_det ... 245S-D.png
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
Bill I have a couple 35 Remington also,ok ok more like a few than a couple, ok ok more like some 35’s
. I have used the RCBS 35-200 in all except one. (When I bought that weird Marlin possibly prototype from Six he had loaded ammo with it and that’s all I have used in it) All the other 35’s have done very well with the RCBS bullet. Though now I have that NOE 230 grain and a NOE 180 grain also. The 35-30 does like the longer 230 NOE bullet. If y’all want to try some let me know and I will get some out to ya.
Last edited by fordwannabe on Thu Jun 20, 2019 1:41 pm, edited 1 time in total.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
-
- Advanced Levergunner
- Posts: 8849
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 35/30 or 35/30-30
Ford, thanks for the kind offer. The Lee mold is essentially a copy of the RCBS.
Is this the 230-grain NOE mold you are referring to? Looks like it might not fit into the early Marlin throat.
http://noebulletmolds.com/NV/product_in ... cuarcgijf6
Is this the 230-grain NOE mold you are referring to? Looks like it might not fit into the early Marlin throat.
http://noebulletmolds.com/NV/product_in ... cuarcgijf6
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
I believe that is the one but in a four cavity. PM me and try a couple. Then you will know for sure. AND I will know because ...did I mention I have a couple, few, no some 35’s.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
Re: 35/30 or 35/30-30
Bill - that Accurate mould looks very similar to a Saeco mould that I have. It works well in a later model 336 in 35 Rem but as you mention the short throat is a bit of an issue. I seat the bullet in the case so that it fits that chamber freely, then crimp in a separate operation using a Lee FCD.
I bought that mould after reading a Glen Fryxell article on the 35 Rem. He judged that Saeco must have designed it around the 35 Rem. It's certainly accurate and stabilises in the 16" twist.
I bought that mould after reading a Glen Fryxell article on the 35 Rem. He judged that Saeco must have designed it around the 35 Rem. It's certainly accurate and stabilises in the 16" twist.
-
- Advanced Levergunner
- Posts: 8849
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 35/30 or 35/30-30
JFE, the notes on the Accurate Web site say that bullet is "inspired by Saeco # 352."
I'll look up Glen's article.
I'll look up Glen's article.
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
Bill in Oregon it is approximately 3:45 pm by approximately 5:45 pm I will be sitting in my shed with a certain NOE mold and hopefully We will have a pile of beautiful boolits. Do you have a certain size you would like them?
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
-
- Advanced Levergunner
- Posts: 8849
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 35/30 or 35/30-30
Friend, I am sizing .360. Don't cast too many on my account, as I am not sure that boolit will chamber.
![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
Well Bill in Oregon, and Mainehunter have shown interest in how I have been coming along with the 35/30. Well I need to do some more testing but I believe I may have found my deer load for this year. It has a 200 grain round nose Sierra bullet and a close to max(for the 35 Remington) dose of 3031. This is five shots at 75 yards. One group does not a load make buuuuuut, it do show promise.
You do not have the required permissions to view the files attached to this post.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
-
- Advanced Levergunner
- Posts: 8849
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: 35/30 or 35/30-30
Nice shooting, friend! I'd hate to be a deer in your neighborhood! ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Re: 35/30 or 35/30-30
No experience with this cartridge but my hunting buddy has a TC Contender in 357 Herret which is a shortened 30-30 case with neck opened up to 35 caliber. He loads the Speer 180 grain bullet and has toppled several dozen deer with this amazing handgun. We have hunted together since the 1970's.
TR
TR
Fire Up the Grill - Hunting is NOT Catch & Release!
Re: 35/30 or 35/30-30
I know Henry is now making a .35 Remington but I'd really like to see them come out with a .35-30 and call it the .35 Henry. I'll bet it would be a smashing success.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- fordwannabe
- Advanced Levergunner
- Posts: 3369
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: 35/30 or 35/30-30
Personally I kinda like having an odd ball caliber or 12.hehe
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.