My only real complaint with Rossi's is that the octagon barrels are not tapered. It seems kinda silly to beef about that, but I like what I like. Do the Italian guns have tapered barrels on the rifles? Looking at a 44 mag 24".
I'll go with a Rossi if I have to, but I really like tapers.
I suppose I could take a Rossi barrel, have a friend of mine surface grind a taper in it, reblue, and re-install it - but with all that it seems like it might be better to just buy one, even at twice the $$$ of a Rossi.
Cimarron/Uberti - tapered octagon barrels?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: Cimarron/Uberti - tapered octagon barrels?
I have a Uberti 1873 short rifle in 44 WCF that is .855 at the receiver and .765 at the muzzle.
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Cimarron/Uberti - tapered octagon barrels?
I have the same short rifle and a Navy/Uberti deluxe that has a tapered barrel. I have a Rossi in 44-40 that I haven't looked at lately but I think it has a little taper. I'd go look but I've lost the keys to that safe. Been looking for them for a month now so I may have to break in. I know how because a few years ago some miscreant left me the evidence of the way he got in.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Cimarron/Uberti - tapered octagon barrels?
I thought only the 20" Rossi was untapered.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Cimarron/Uberti - tapered octagon barrels?
Griff wrote:I thought only the 20" Rossi was untapered.
Rossi octagons are straight, both the 20" and the 24's. that's why the 24" in 357m feels like a truck axle hanging out there.
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Cimarron/Uberti - tapered octagon barrels?
My 1986 Uberti 24" octagon mdl 1873 is:
.865" @ the receiver &
.735" @ the muzzle.
.865" @ the receiver &
.735" @ the muzzle.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Cimarron/Uberti - tapered octagon barrels?
Cimarron : 830. 997 9090
Texas Jacks (Fredericksburg) 830. 997 3213
Call these guys and ask em about tapered barrels
Texas Jacks (Fredericksburg) 830. 997 3213
Call these guys and ask em about tapered barrels