PPI or PPR Brass
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 209
- Joined: Sat Nov 16, 2013 1:59 pm
- Location: Stevens,Lancaster co Pa
PPI or PPR Brass
Has anyone had any issues with this brass in boxer primed .308 win? My normal choice of primers would be a Win LRM with win 748 powder but the primer pocket is a hair to tight.I found CCI LRM primers fit ok with just a slight amount of force to seat them.I load for my Mod 88 and stay on the 3/4 power side with speer 2025 bullets.
-
- Senior Levergunner
- Posts: 1521
- Joined: Sun Apr 15, 2007 12:52 am
- Location: Leverland, U.S.A.
- Contact:
Re: PPI or PPR Brass
308magtip,
Could your brass be PPU, also known as PRVI PARTIZAN, Article # C-020, lower left column?:
http://www.prvipartizan.com/rcases.php
.30 Carbine headstamp, to show PPU marking:
Shawn
Could your brass be PPU, also known as PRVI PARTIZAN, Article # C-020, lower left column?:
http://www.prvipartizan.com/rcases.php
.30 Carbine headstamp, to show PPU marking:
Shawn
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
- Griff
- Posting leader...
- Posts: 20869
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: PPI or PPR Brass
I quit using CCI primers for the vast majority of my reloading as I've found them to be harder to seat. I pretty much only use them in when I want magnum primers.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: PPI or PPR Brass
I have loaded PPU prvi partizan 303 savage cases with wlr and cci no problems, maybe run a primer pocket uniformer in a couple to see if you shave brass if not then they are good to go, by the way those speer magtips are good bullets I hope that since speer has dropped the deepcurls they will gear up the magtips again good elk bullets. danny