The 1895s pose for a portrait

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

The 1895s pose for a portrait

Post by Noah Zark »

Got the 1895s together for a family portrait:

Image

Top: Winchester/Miroku in 405 Winchester; barrel shortened to 20", and a PTC replica Lyman 21 rear sight installed, a green Fire Sight insert out in front, and a Limbsaver recoil pad. IMO, 405s don't "kick" as bad as some make them out to; to me it feels a lot like a 12 ga 2-3/4 high brass load.

Center: Browning/Miroku in 30-40 US; "out of box" stock, and no planned mods.

Bottom: Winchester from early 1900s in 30-06; custom birds-eye maple furniture, reblued, scope mount holes plugged with screws, and firing pin hole in boltface bushed. Ivory front bead, and "wide V" rear sight leaf (This one's been seen on this forum before).

Love them levers.

Noah
Might as well face it, you're addicted to guns . . .
User avatar
TedH
Advanced Levergunner
Posts: 8250
Joined: Tue Apr 03, 2007 5:19 pm
Location: Missouri

Re: The 1895s pose for a portrait

Post by TedH »

Very nice! :mrgreen:
NRA Life Member
User avatar
Streetstar
Advanced Levergunner
Posts: 3901
Joined: Sun Jan 11, 2009 5:58 am
Location: from what used to be Moore OK

Re: The 1895s pose for a portrait

Post by Streetstar »

I love 'em all ! I would love to have a short barreled 405 in my collection --- might give my Guide Gun a run for the money :) - but would be proud to own any of those rascals
----- Doug
User avatar
Sixgun
Posting leader...
Posts: 18713
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa. Where The Finest Winchesters & Colts Reside

Re: The 1895s pose for a portrait

Post by Sixgun »

I always did like the look of Birds Eye Maple. Saw a Colt Lightning like that one time that was factory original from the early nineties, but I would have had to sell a half dozen 1886's to get it.-------6
1st. Gen. Colt SAA’s, 1878 D.A.45 and a 38-55 Marlin TD

Image
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: The 1895s pose for a portrait

Post by Blaine »

Your modified .405 is sweet! I'd like to do that to mine if I keep it. :mrgreen: :mrgreen: :mrgreen:
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
FWiedner
Advanced Levergunner
Posts: 8862
Joined: Sat Sep 08, 2007 9:50 pm
Location: North Texas

Re: The 1895s pose for a portrait

Post by FWiedner »

Dang those are purdy.

Ever had one of 'em out of the house?

:wink:

:lol:
Government office attracts the power-mad, yet it's people who just want to be left alone to live life on their own terms who are considered dangerous.

History teaches that it's a small window in which people can fight back before it is too dangerous to fight back.
bdhold

Re: The 1895s pose for a portrait

Post by bdhold »

thanks for the droolfest
tman
Advanced Levergunner
Posts: 3243
Joined: Fri Sep 21, 2007 6:43 pm

Re: The 1895s pose for a portrait

Post by tman »

8)
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: The 1895s pose for a portrait

Post by Noah Zark »

FWiedner wrote:
Ever had one of 'em out of the house?

:wink:

:lol:

Multiple times, but I've not bloodied any of them myself. Done with hunting unless a coyote wanders into the sights while at the range or in my back yard.

I enjoy busting up dirt clods and claybirds on berms, and chasing plastic soda bottles and empty oil bottles around the berms, too. Cheap reactive targets.

Noah
Might as well face it, you're addicted to guns . . .
MrMurphy
Senior Levergunner
Posts: 1947
Joined: Mon Jan 19, 2009 12:32 pm

Re: The 1895s pose for a portrait

Post by MrMurphy »

While I love the way the 95 looks and generally handles "in the hand" i never much did care for how they load. Not one of Browning's better ideas if what I remember on loading them is correct (using the next round to push down and then rotating it?). Never have gotten to shoot one. The Russian army contract modification for charger loading was a much better idea.
User avatar
Sixgun
Posting leader...
Posts: 18713
Joined: Sun Sep 16, 2007 7:17 pm
Location: S.E. Pa. Where The Finest Winchesters & Colts Reside

Re: The 1895s pose for a portrait

Post by Sixgun »

MrMurphy wrote:While I love the way the 95 looks and generally handles "in the hand" i never much did care for how they load. Not one of Browning's better ideas if what I remember on loading them is correct (using the next round to push down and then rotating it?). Never have gotten to shoot one. The Russian army contract modification for charger loading was a much better idea.
Mr. Murphy,
It's really no different than a single column mag.....you know, standard 1911. You just push them in. The difference comes when the 1895 is chambered in a rimmed cartridge, like the 30-40, 40-72, 405,etc. You're supposed to make sure that the rim of the cartridge is in front of the rim of the cartridge that is below it. If not, when retracting the lever to chamber a round, you will be pushing 2 cartridges (or attempting to) in the chamber.

In shooting tens of thousands of rounds out of 95's it has never happened to me and I never used any thought while loading it. In fact, I'm not even sure it could be done intentionally. ----6
1st. Gen. Colt SAA’s, 1878 D.A.45 and a 38-55 Marlin TD

Image
rjohns94
Advanced Levergunner
Posts: 10820
Joined: Thu Sep 06, 2007 6:02 pm
Location: York, PA

Re: The 1895s pose for a portrait

Post by rjohns94 »

Very nice
Mike Johnson,

"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
User avatar
ollogger
Advanced Levergunner
Posts: 2807
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: The 1895s pose for a portrait

Post by ollogger »

Very nice trio!!!

sounds like my kind of shooting

ollogger
M. M. Wright
Advanced Levergunner
Posts: 4296
Joined: Wed Sep 15, 2010 12:57 pm
Location: Vinita, I.T.

Re: The 1895s pose for a portrait

Post by M. M. Wright »

Gorgeous guns Noah, I especially like the short barreled 405. Was the wood checkered originally or is that something you added?
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
User avatar
Borregos
Advanced Levergunner
Posts: 4756
Joined: Thu Sep 13, 2007 7:40 am
Location: Ontario, Canada

Re: The 1895s pose for a portrait

Post by Borregos »

Very nice :D :D
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
Noah Zark
Senior Levergunner
Posts: 1333
Joined: Sun Oct 07, 2007 11:03 am
Location: PA

Re: The 1895s pose for a portrait

Post by Noah Zark »

M. M. Wright wrote:Gorgeous guns Noah, I especially like the short barreled 405. Was the wood checkered originally or is that something you added?
Checkered previously; I believe from the factory, given the particular vintage of the Winchester.


Thanks to everyone for the comments!

Noah
Might as well face it, you're addicted to guns . . .
barbarossa
Senior Levergunner
Posts: 1149
Joined: Sat Sep 29, 2007 1:46 pm

Re: The 1895s pose for a portrait

Post by barbarossa »

All you need now is a 95 saddle ring carbine
User avatar
Ysabel Kid
Moderator
Posts: 27893
Joined: Mon Sep 17, 2007 7:10 pm
Location: South Carolina, USA
Contact:

Re: The 1895s pose for a portrait

Post by Ysabel Kid »

Very nice indeed! 8)
Image
Post Reply