need help- Interarms 22 ATD
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
need help- Interarms 22 ATD
My Neighbor has an Interarms 22 atd with a broken Mag Tube. He dropped the Gun and snapped the tube off in the receiver. He got the short piece out but needs a new tube. I have searched the net to no avail. Can't even find anyone that has parts for interarms atd. If U could help with a web site or anything that would help Me get the part it would be greatly appreciated. Do I understand correctly that interarms is now Rossi ? I have searched for Rossi also.
Perry
Perry
Perry in Bangor----++++===Calif
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: need help- Interarms 22 ATD
Hi Perry,pwl44m wrote:My Neighbor has an Interarms 22 atd with a broken Mag Tube. He dropped the Gun and snapped the tube off in the receiver. He got the short piece out but needs a new tube. I have searched the net to no avail. Can't even find anyone that has parts for interarms atd. If U could help with a web site or anything that would help Me get the part it would be greatly appreciated. Do I understand correctly that interarms is now Rossi ? I have searched for Rossi also.
Perry
Interarms was just the importer. That gun was a copy of the Browning Semi Auto 22 made in China exported here by Norinco. Parts are out there and some of the Browning parts will work, but I don't know which.
I did find this?
Brownells Gunsmith Kinks® - Kink for Interarms/Norinco .22 Semi-Auto Rifle
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Re: need help- Interarms 22 ATD
Thx Nate, now the only question is will the Browning Outer Mag tube work on the interarms. If the guy wants to pay for it I will order it. $19.99 plus $7.95 shipping. Pretty simple operation to install.
Perry
Perry
Perry in Bangor----++++===Calif
Re: need help- Interarms 22 ATD
.
Sarco carries the Norinco ATD-22 parts, including the outer magazine tube (pt# ATD048)
http://www.sarcoinc.com/atd.html
.
Sarco carries the Norinco ATD-22 parts, including the outer magazine tube (pt# ATD048)
http://www.sarcoinc.com/atd.html
.
Re: need help- Interarms 22 ATD
Thx Pete, went to that site and they don't list the tube for sale. It is shown in the diagram but not in the price list.
Perry
Perry
Perry in Bangor----++++===Calif
Re: need help- Interarms 22 ATD
Might require some ingenuity but brownells sells basic ones that people adapt.
Re: need help- Interarms 22 ATD
Thx Mescalero, I found the one at Brownells for a Browning, didn't see anything else listed.
Perry
Perry
Perry in Bangor----++++===Calif
-
- Senior Levergunner
- Posts: 1522
- Joined: Sun Apr 15, 2007 12:52 am
- Location: Leverland, U.S.A.
- Contact:
Re: need help- Interarms 22 ATD
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
-
- Levergunner 3.0
- Posts: 596
- Joined: Sun Sep 16, 2007 9:09 am
- Location: Camp Verde, AZ
Re: need help- Interarms 22 ATD
I've got one and have a question. On the Browning the cartridge guide spring has a leg that fits into a hole in the receiver to retain it. On my ATD there is no hole and the leg of the spring is pointed down toward the bolt. What is yours like?
Got mine at a gun show for $50 and the PO said it wouldn't feed consistently. When I took it apart everything inside was yellow with cosmoline.
Cleaned out the cosmoline and it feeds fine.
Got mine at a gun show for $50 and the PO said it wouldn't feed consistently. When I took it apart everything inside was yellow with cosmoline.
Cleaned out the cosmoline and it feeds fine.
Bill Ranks
I never learned from a man who agreed with me.
Robert A. Heinlein
I never learned from a man who agreed with me.
Robert A. Heinlein
Re: need help- Interarms 22 ATD
pwl44m wrote:Thx Pete, went to that site and they don't list the tube for sale. It is shown in the diagram but not in the price list.
Perry
FWIW, It's been my experience that some companies de-list whatever, as if not available, when their inventory runs too low to be bothered - even though there may still be 1 or 2 of whatever left in the part bins.
I would suggest you either call or email Sarco with your wants before giving up on them.
Additionally, I've found that when I actually contact a company, if they really don't have what I want, they will sometimes refer me to anouther source.
.
-
- Senior Levergunner
- Posts: 1522
- Joined: Sun Apr 15, 2007 12:52 am
- Location: Leverland, U.S.A.
- Contact:
Re: need help- Interarms 22 ATD
...because http://www.mmgunsmithing.com/ used to be the warranty repair center for INTERARMS, and they still handle a lot of their parts:
ShawnM&M Gunsmithing is a shop offering a full line of gunsmithing services.
Our gunsmith is a graduate of the Pennsylvania School who was employed as a gunsmith at Interarms for nearly 15 years and has vast experience with their firearms (Rossi, Star, Walther, Mark X, Astra, Va. Dragoon, FEG, Helwan, Bersa, Bernardelli). Repair and custom work is offered for all manufactures.
"That's right, Billy, I'm good with it. I hit what I shoot at, and I'm fast!"-Lucas McCain, c1882.
Re: need help- Interarms 22 ATD
Thx Shawn, I sent Them an e-mail.
@ williamranks, I haven't seen the inside of the Gun yet. If I get the part for Him I will try to remember to check on that unless Someone else can address Ur question.
Perry
@ williamranks, I haven't seen the inside of the Gun yet. If I get the part for Him I will try to remember to check on that unless Someone else can address Ur question.
Perry
Perry in Bangor----++++===Calif
Re: need help- Interarms 22 ATD
Got an e-mail from M&M, He makes the tubes. $30+$7.95sh+$3 credit card use. I will see what the Guy wants to do. Thx Shawn for the link.
One little kink, M&M says it needs to be fitted and installed by a competent Gunsmith for safety and function ! Anybody know one in Marysville ?
Perry
One little kink, M&M says it needs to be fitted and installed by a competent Gunsmith for safety and function ! Anybody know one in Marysville ?
Perry
Perry in Bangor----++++===Calif